Samsung SV-DVD6E User manual

DVD-VCR
SV-DVD6E
Instruction Manual
www.samsungvcr.com PAL/NTSC
AK68-00046W
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 1

GB
Contents (cont.)
3
GB
Contents
2
◆PLAYING BACK
■Playing a Cassette......................................................................................... 33
■Adjusting Picture Alignment Automatically.................................................... 33
■Adjusting Picture Alignment Manually........................................................... 33
■Selecting the Audio Output Mode.................................................................. 34
■Playing a Cassette in Slow Motion................................................................ 34
■Playing a Sequence Frame by Frame........................................................... 35
■Playing a Sequence at Variable Speeds....................................................... 35
■Picture Search, Fast Forward/Rewind........................................................... 36
■Searching for a Specific Sequence............................................................... 36
■Using the Tape Counter................................................................................ 37
■Connecting an RCA Audio/Video Input Cable............................................... 38
■Using the Assemble Edit Function................................................................. 39
■Recording from Another VCR or Camcorder................................................. 39
■Audio Dubbing a Pre-recorded Cassette....................................................... 40
■Using the TV Buttons on the Remote Control............................................... 41
■SQPB (Super VHS Quasi Playback)............................................................. 42
◆DVD FUNCTIONS
■Choosing a Connection................................................................................. 43
■Using the Setup Menu................................................................................... 44
■Using the Disc Menu Language.................................................................... 45
■Setting Up the Audio Language Features..................................................... 46
■Using the Subtitle Language......................................................................... 46
■Setting Up the Parental Control..................................................................... 47
■Setting Up the Audio Options........................................................................ 48
■Setting Up the Display Options...................................................................... 49
■A/V Receiver Connections............................................................................. 50
■Special Playback Features............................................................................ 51
■Using the Display Function (DVD/VCD/CD).................................................. 52
■Repeat Play................................................................................................... 53
■Program Play (DVD/VCD/CD)....................................................................... 54
■Random Play (DVD/VCD/CD)....................................................................... 54
■SCREEN FIT Play......................................................................................... 55
■Digest Play.................................................................................................... 56
■Using the Disc View Function (Track View VCD).......................................... 57
■Using the Disc View Function (Index View VCD).......................................... 57
■Selecting the Audio Language (Using the Audio button)............................... 58
■Selecting the Subtitle Language (Using the Subtitle button)......................... 58
■Changing the Camera Angle......................................................................... 59
■Using the Mark Function (DVD/VCD)............................................................ 60
■Recalling a Marked Scene............................................................................. 60
■Clearing a Mark............................................................................................. 60
■Using the Zoom (DVD/VCD).......................................................................... 61
■3D Sound Function........................................................................................ 61
■MP3 Play....................................................................................................... 62
■MP3 Play (CD-R MP3 disc requirements)..................................................... 63
◆FOREWORD
■Safety Instructions......................................................................................... 5
■Disc Type and Characteristics....................................................................... 6
◆DVD-VCR OVERVIEWS
■Front View of the DVD-VCR.......................................................................... 7
■Rear View of the DVD-VCR........................................................................... 7
■Infrared Remote Control................................................................................ 8
■Display Indicators.......................................................................................... 9
■Accessories................................................................................................... 9
◆CONNECTING YOUR DVD-VCR
■Deciding How to Connect DVD-VCR............................................................. 10
■Connecting DVD-VCR to the TV using the Coaxial Cable............................ 11
■Connecting DVD-VCR to the TV using the RCA Cable................................. 11
■Connecting DVD-VCR to a Satellite Receiber or Other Equipment.............. 12
■Plug &Auto Set Up........................................................................................ 13
■Tuning Your Television for the DVD-VCR..................................................... 14
■Deck Control Keys......................................................................................... 15
■Copying from DVD to VCR............................................................................ 16
■Inserting Batteries in the Remote Control...................................................... 17
■Setting the Date and Time............................................................................. 17
■Menu Language............................................................................................. 18
◆SETTING UPYOUR DVD-VCR
■Presetting the Stations Automatically............................................................ 19
■Presetting the Stations Manually................................................................... 20
■Clearing a Preset Station............................................................................... 21
■Changing the Preset Station Table................................................................ 22
■Selecting the RF OUT Sound Mode (B/G-D/K)............................................. 23
■Setting the DVD-VCR Output Channel.......................................................... 23
■Selecting the Colour Mode............................................................................ 24
■NICAM........................................................................................................... 24
■Intelligent Picture Control.............................................................................. 25
■Auto Power off............................................................................................... 26
■Selecting the Cassette Type.......................................................................... 27
■Auto Repeat Play........................................................................................... 27
■Displaying/Hiding On-Screen Information..................................................... 28
◆RECORDING TELEVISION BROADCASTS
■Selecting the Recording Speed..................................................................... 28
■Protecting a Recorded Cassette.................................................................... 29
■Recording a Programme Immediately........................................................... 29
■Recording a Programme with Automatic Stop............................................... 30
■Using the Timer Programming Feature......................................................... 31
■Checking a Preset Recording........................................................................ 32
■Cancelling a Preset Recording...................................................................... 32
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 2

GB
Safety Instructions
5
GB
Contents (cont.)
4
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
Do NOT expose the DVD-VCR
to extreme temperature condi-
tions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight. Do NOT expose the DVD-VCR to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or light-
ning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
◆SOLVING PROBLEMS
■Technical Specifications................................................................................ 64
■Problems and Solutions (VCR)...................................................................... 65
■Troubleshooting Guide (DVD)....................................................................... 66
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corpration and other rights owners. Use of this
copyright protection technology must by authorized by Macrovision
Corporized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
☛
➢
NoteImportantHold downPress/push
Symbols
1 1
1
= Step number
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 4

GB
Front View of the DVD-VCR
Rear View of the DVD-VCR
7
Disc Type and Characteristics
GB
6
This DVD player is capable of playing the following types of discs with the corresponding logos :
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
~DIGITAL
SOUND
STEREO
• Playback
Region
Number
• PAL colour
system in U.K,
France, Germany,
etc.
• Dolby
Digital disc • Digital
Audio disc
• Stereo
disc • DTS disc
Disc Markings
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
Playback Region Number
PAL
12 Cm
8 Cm
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
Audio
+
Video
Audio
+
Video
Audio
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
VIDEO-CD
AUDIO-CD
12 Cm
8 Cm
74 min.
20 min.
12 Cm
8 Cm
74 min.
20 min.
Disc Types
(Logos) Recording
Types Disc Size Max.
Playing
Time Characteristics
DVD
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
NTSC
1 2 3 4 5 6 7 8 9
1RF ANTENNA INPUT
2RF OUT TO TV
3LINE OUT TO TV (COMPOSITE)
4LINE IN 1
5AUDIO LINE OUT
(S-VIDEO OR COMPONENT)
6COMPONENT VIDEO OUT
7DIGITAL AUDIO OUT(COAXIAL)
8DIGITAL AUDIO OUT(OPTICAL)
9S-VIDEO OUT
VIDEO CASSETTE
COMPARTMENT
PROGRAMME
SELECTION
BUTTONS
PLAY/STILL
BUTTON
STOP
BUTTON REW /
SKIP BACK
BUTTON
RECORD
BUTTON
EJECT BUTTON
F.F /
SKIP NEXT
BUTTON
OPEN/CLOSE
BUTTON DVD/VCR SELECT BUTTON COPY BUTTONDVD DECKSTANDBY/ON BUTTON
LINE IN 2 VIDEO
INPUT JACK LINE IN 2 AUDIO L, R INPUT JACK
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 6

GB
Display Indicators
Accessories
9
Infrared Remote Control
GB
8
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
1 2 3 4 5 6 7
8 9 10 11 12 13
1The DVD Deck is active
2A DVD, CD, VCD, or SVCD is loaded
3The number to the right of the “TITLE” symbol is
the current title number
4The time, counter position, time remaining or
current deck status is displayed
5VHS tape is inserted
6Recording is in progress (normal and timer)
7The VCR Deck is active
83D Sound is active
9A DVD with a DTS soundtrack is loaded
10 The number to the right of the “CHAP” symbol is
the current chapter number
11 The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
12 A Timer Recording is programmed or in progress.
If blinking there is an error.
13 DVD to VHS copy is in progress
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
1STANDBY/ON
2TV MUTE, ZOOM
30-9
4ANGLE
5VOLUME +/-
6SCREEN FIT, SVHS
7DVD, VCR, TV
8REWIND, SKIP BACK
9STOP
10 DISPLAY
11 CLOCK/COUNTER
12 UP
13 LEFT
14 RECORD
15 SUBTITLE, TIMER
16 TITLE, SPEED
17 3D SOUND
18 OPEN/CLOSE
19 Feature unavailable on this
model
20 AUDIO
21 PROG/TRK ( / )
22 INPUT SEL.
A.TRK
23 FAST-FORWARD
SKIP NEXT
24 PLAY/STILL
25 CLEAR
26 DISC MENU
27 RIGHT
28 DOWN
29 RETURN, A.DUB
30 MODE, REPEAT
31 MARK, INDEX
32 DIGEST
33 JOG DIAL
34 SHUTTLE DIAL
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 8

GB
Connecting DVD-VCR to the TV using the Coaxial Cable
Connecting DVD-VCR to the TV using the RCA Cable
11
GB
Deciding How to Connect DVD-VCR
10
To receive television programmes a signal must be received from
one of the following sources:
◆An outdoor aerial
◆An indoor aerial
◆A cable television network
◆A satellite receiver
☛Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1Remove the aerial or network input cable from the television.
2Connect this cable to the 75Ωcoaxial socket marked on the
rear of your DVD-VCR.
3Plug the coaxial cable supplied into the socket on your
DVD-VCR.
4Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
You must take into account various factors when connecting audio or video systems:
◆Types of connectors available on your systems
◆Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
LINE Rear Audio/Video RCA In/Out ◆Television
◆Other VCR
Audio output Rear Audio RCA Out ◆Audio out (DVD only)
COMPONENT Rear RCA Out ◆COMPONENT out (DVD only)
output
S-VIDEO Rear S-JACK Out ◆S-Video out (DVD only)
output
Digital AUDIO Rear Optical Out ◆Digital Audio out (DVD only)
output coaxial
OUT TO TV Rear 75 ΩOut ◆Television
coaxial
IN FROM ANT. Rear 75 ΩIn ◆Aerial
coaxial ◆Cable television network
◆Satellite receiver
☛Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
3
2
TV
4
Aerial
RF coaxial cable
2
3
TV
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆Obtain better quality sound and pictures
◆Simplify the setting up procedure of your DVD-VCR
☛◆Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1Connect the coaxial cable as indicated in the above section.
2Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
3Plug the other end into the appropriate connector on the television.
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 10

GB
Plug & Auto Set up
13
GB
12
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2Plug the DVD-VCR into the mains.
Result: The LANGUAGE SET menu is displayed.
3Select the required language by pressing the or buttons.
4Press ENTER to store the language selected.
Result: A message appears.
5Press ENTER to start the auto scanning.
◆The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
6On completion, press RETURN twice to exit the menu.
➢
◆ Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no tape
inserted.
AUTO SET UP
PLEASE WAIT
6 0
%
I ■ ■■ ■■■ ■ ■■ ■ ■ ■ -------I
RETURN
TV
Connecting Other Equipment to Your DVD-VCR
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢The RCA input/output connectors on the rear of the DVD-VCR are used for
equipment, such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
Camcorder
VCR
Sound system
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 12

GB
Deck Control Keys
15
Tuning Your Television for the DVD-VCR
GB
14
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1STANDBY/ONButton
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
4DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
➢Before using the VCR operation of 19~42 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 43~63 pages, press
the SELECT button on the remote control to select and
watch DVD.
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
➢To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
mode (AV).
1Switch on the television.
2Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3Select a programme position on the television to be reserved for
use with your DVD-VCR.
4Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press
II
button.
5Start a scan on your television or set the television to UHF
channel 36.
6Fine tune the television until the pictures and sound are obtained
clearly.
7If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on page
67).
8When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result: That programme is now reserved for use with your
DVD-VCR.
4
2
11
23
4
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 14

GB
17
GB
16
Inserting Batteries in the Remote Control
Setting the Date and Time
You must insert or replace the batteries in the remote control when
you:
◆Purchase the DVD-VCR
◆Find that the remote control is no longer working
correctly
1Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆+ on the battery with + on the remote control
◆– on the battery with – on the remote control
3Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢Do not mix different battery types (manganese and
alkaline for example).
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆Automatically stop programme recording
◆Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆You purchase the DVD-VCR
☛◆Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
CLOCK SET option.
3Press the ENTER button to select this option.
Result: The CLOCK SET menu is displayed.
4Press or to select the hour, minutes, day, month and year.
Result: The option selected flashes.
5Press the or buttons to increase or decrease the value.
Result: The day of the week is displayed automatically.
➢You can hold the or buttons down to scroll more
quickly through the values.
6On completion, press RETURN twice to exit the menu.
RETURN
CLOCK SET
12:00 1/JAN/2002
TUE
MAIN MENU
CLOCK SET
RETURN ENTER
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆The DVD will go into Play mode and the VCR will go into Record
mode.
◆If the DVD disc menu appears, you may need to press the PLAY
button manually to begin copying.
4Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛For NTSC DVD or VCD copy
◆Before starting the copy process, set the Quasi PAL to
Off in Display options of DVD SETUP. (see page 49)
◆If Quasi PAL is On, the copy process can not active.
◆The copy is only active PAL tape system.
1
1
2
3
4
4
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 16

GB
18
Menu Language
1 Open “MAIN MENU”
With the DVD in stop mode, press the SETUP button.
2 Set “Language”
Using the Up/Down and Left/Right buttons, move the selection
arrow to Language set then press ENTERbutton.
3Set menu Language
Move the selection bar to your desired Language, then press
ENTER button.
LANGUAGE SET
RETURN ENTER
MAIN MENU
LANGUAGE SET
RETURN ENTER
English
Français
Deutsch
Español
Italiano
Nederlands
1
00046W SV-DVD6E/UMG-GB1 2/7/03 10:05 AM Page 18

GB
19
Presetting the Stations Automatically
☛You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
our DVD-VCR contains a built-in tuner used to receive television
roadcasts.
ou must preset the stations received through the tuner. This can
e done:
◆Plug & Auto Set up (see page 13)
◆Automatically
◆Manually (see page 20)
ou can store up to 80 stations.
Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
Press the corresponding , or , buttons to select the
INSTALLATION option.
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
Press the corresponding or buttons, until the AUTO SET
UP option is selected.
And then press the ENTER button to select this option.
Result: A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
Press ENTER to start the auto scanning.
Result: ◆The PLEASE WAITindication flashes on the
television screen.
◆The first frequency band is scanned and the first
station found is displayed and stored.
◆The DVD-VCR then searches for the second station
and so on.
◆When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
➢◆Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
2
2
1
2
2
VCR
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
RETURN
YOUR DATA WILL BE LOST
PRESS ENTER TO CONTINUE
RETURN TO EXIT
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
MAIN MENU
INSTALLATION
RETURN ENTER

GB
2120
Clearing a Preset Station
If you have stored a TV station:
◆That you do not require
◆At the wrong programme position
you can cancel it.
1Press the SETUP button on the remote control.
2Press the corresponding , or , buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the corresponding or buttons, until the MANUAL SET
UP option is selected.
5Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6Press the corresponding or buttons, until the required preset
TV station is selected. (PR)
7Press the CLEAR button.
8Repeat the same procedure from Step 6onwards until all the
required stations have been cleared.
9On completion, press the RETURN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
Presetting the Stations Manually
☛You do not need to preset the stations manually if you
have already set them automatically.
1Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the corresponding or buttons, until the MANUAL SET
UP option is selected.
5Press the ENTER button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
6Press the or buttons to select a programme number as
required.
7Press the button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8Press the or buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9Press the or buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the or button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the or buttons
previous character respectively.
12 If you... Then...
Wish to store the ◆Press the or buttons until the MFT
station displayed is selected.
◆Press the or buttons to adjust the
picture, if necessary.
◆Press ENTER to store the station
Do notwish to ◆Press the or buttons until the
store the station CH is selected.
displayed ◆Press the or buttons to go on
scanning the frequency band and display
the next station
◆Go back to the beginning of Step 12
13 Repeat this procedure from Step 6onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
☛You do not need to preset the stations manually if you
have already set them automatically.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
TV STATION TABLE
P R C H NAME
1
2
3
4
5SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
P R :
C H : ---
MFT : -
NAME : ----
MEMORY:ENTER
RETURN
MAIN MENU
INSTALLATION
RETURN ENTER
VCRVCR

GB
2322
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the or buttons, until the VCR OUTPUT CHoption is
selected.
5Select the required output channel (CH21~CH69) by pressing the
or buttons.
6On completion, press RETURN twice to exit the menu.
Then tune your television again (see page 14).
Changing the Preset Station Table
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1Press the SETUP button on the remote control.
2Press the corresponding , or , buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the corresponding or buttons, until the MANUAL SET
UP option is selected.
5Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6Press the corresponding or buttons, until the required preset
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
8Press the or buttons to select required position and the press
ENTER again to swap the position.
9On completion, press the RETURN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5SWAPPING:ENTER
RETURN DELETE:CLEAR
TV STATION TABLE
PR CH NAME
1
2
3 003
4
5SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
VCR
VCR Selecting the RF OUT Sound Mode (B/G-D/K) VCR
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the or buttons, until the TV SYSTEM option is
selected.
5 Press the or button to select G or K.
6On completion, press RETURN to exit the menu.
MAIN MENU
INSTALLATION
RETURN ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
G
K
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
MAIN MENU
CH21
CH36
CH69
INSTALLATION
RETURN ENTER

GB
2524
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding or buttons, until the IPC option is
selected.
5Press the button to select the IPC (intelligent picture control)
option.
➢When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
6To adjust the sharpness manually, press the button to turn the
IPC mode OFF.
7Press the or buttons until the picture is displayed according to
your preferences.
➢If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8On completion, press the RETURN button again.
VCR
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢ ◆When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding or buttons, until the COLOUR
SYSTEM option is selected.
5Press the button to select AUTO ➝ PAL ➝ MESECAM ➝ B/W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6On completion, press RETURN twice to exit the menu.
VCR
NICAM
VCR
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 34.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding or buttons, until the NICAM option
is selected.
5To... Press or , until...
Mono mode OFF is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
6On completion, press RETURN twice to exit the menu.
MAIN MENU
USER SET
RETURN ENTER
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
RETURN
MAIN MENU
USER SET
RETURN ENTER
AUTO
PAL
MESECAM
B/W
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
RETURN
ON
OFF
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
RETURN
ON
OFF
MAIN MENU
USER SET
RETURN ENTER

GB
2726
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
VCR FUNCTION SETUP option.
3Press the ENTER button to select this option.
4Press the corresponding or buttons, until the TAPE
SELECT option is selected.
5Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E300 E260
6Press RETURN twice to exit the menu.
You can set repeat play to repeat the tape continuously from
beginning to end.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
VCR FUNCTION SETUP option.
3Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4Press the corresponding or buttons, until the REPEAT
PLAY option is selected.
5To... Press or , until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6On completion, press RETURN twice to exit the menu.
Auto Repeat Play
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding or buttons, until the AUTO POWER
OFF option is selected.
5Press the button, until you select the time of Auto Power off
interval. OFF 2HOUR 3HOUR
6On completion, press RETURN twice to exit the menu.
VCR
VCR
VCR
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
RETURN
OFF
2HOUR
3HOUR
MAIN MENU
USER SET
RETURN ENTER
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
VCR FUNCTION SETUP
Tape Select E180
Repeat Play Off
OSD O n
RETURN
E180
E240
E260
E300
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
VCR FUNCTION SETUP
Tape Select E180
Repeat Play Off
OSD O n
RETURN
Off
On

GB
2928
Protecting a Recorded Cassette
Recording a Programme Immediately
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1If you wish to protect a cassette, break off the tab using a small
screwdriver.
2To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded, with
the window visible and the safety tab intact or the opening covered
with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4Select:
◆ The station to be recorded using the PROG/TRK( or )
buttons
or
◆The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The station number is displayed and the programme
can be seen on the television.
5Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6Hold REC (
●
) down for a while to start recording.
Result: The record indicator appears on the television and DVD-
VCR display. An index is recorded on the tape (see page
36).
7To stop recording, press
■
once.
➢◆If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆If you reach the end of the tape while recording, the
cassette rewinds automatically.
1
Displaying/Hiding On-Screen Information
Selecting the Recording Speed
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and
Timer functions, which cannot be hidden).
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
VCR FUNCTION SETUP option.
3Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4Press the corresponding or buttons, until the OSD option is
selected.
5To... Press or , until...
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
6On completion, press RETURN twice to exit the menu.
You can record a cassette at two different speeds:
◆SP (Standard Play)
◆LP (Long Play)
In Long Play modes:
◆Each cassette lasts twice as long
◆The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
VCR
VCR
VCR
VCR
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
VCR FUNCTION SETUP
Tape Select E180
Repeat Play Off
OSD O n
RETURN
On
Off
7
6
4
4
5

GB
3130
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛Before presetting a recording, check that the date and
time are correct.
1Insert the cassette and press TIMER on the remote control.
Result: The timer programme is displayed.
2Press to select the input source.
3Select the required station by pressing the , buttons.
4Press to select the recording day.
5Select the required day by pressing the or buttons.
6Press to select the recording start time.
7Select the required hour value by pressing the or buttons.
8Press to select the minutes.
9Select the required minute value by pressing the or buttons.
10 Press to select the recording stop time.
11 Select the required recording stop time by pressing the or
buttons, following the same procedure as when selecting the
recording start time.
12 Press to select the recording speed.
13 Press the or buttons to select the SP (Standard Play), LP
(Long Play), AUTO (Auto Tape Speed Select) recording speeds.
14 When you have finished, press the RETURN button.
15 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
15
1/JAN TUE 12:09
PR DAY START STOP
1 SA 9 12:00 12:50SP
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
SET:
RETURN DELETE:CLEAR
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4Select:
◆ The station to be recorded using the PROG/TRK( or )
buttons
or
◆The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The channel number is displayed and the programme
can be seen on the television.
5Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6Hold the REC button (
●
) down for a while to start recording.
Result: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 36).
7Press the REC button (
●
) several times to increase the recording
time in:
◆30-minute intervals up to four hours
◆1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
8If you wish to cancel the recording before the end, press
STANDBY/ON.
☛If the end of the tape is reached while recording:
◆The recording stops
VCRVCR
LENGTH 2:30
SET LENGTH :
PRESS REC ●
3
4
4
6
5

GB
3332
Playing a Cassette
Adjusting Picture Alignment Automatically
Adjusting Picture Alignment Manually
This function allows you to play back any pre-recorded cassette.
1Switch on both the television and your DVD-VCR.
2Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ll .
Otherwise, the cassette is played automatically.
➢When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
3To... Then press...
Stop the playback
■
(STOP).
Eject the cassette (EJECT).
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
Result: ◆The tracking bar appears.
◆The picture is automatically adjusted.
◆The tracking bar disappears when digital auto tracking has
been completed.
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK ( or ) buttons until the picture is
clear and stable.
Result: ◆The tracking bar appears.
◆The image is adjusted.
◆The tracking bar disappears when you release the button.
Checking a Preset Recording
Cancelling a Preset Programme
You can check your preset recordings:
◆When you have finished presetting the DVD-VCR
◆If you have forgotten which programmes will be
recorded
1Press TIMER on the remote control.
Result: The timer programme is displayed.
2Press the or buttons to select the required programme.
3Press the or buttons to select and change any values as
required. For more details, refer to the previous page.
4On completion, press RETURN twice.
You can cancel any programmes that are:
◆Incorrect
◆No longer required
1Press TIMER on the remote control.
Result: The timer programme is displayed.
2Select the programme to be cancelled by pressing the or
buttons.
3Press the CLEAR button to cancel the selected programme.
Result: All the recording information is deleted and the broad-
cast will not be recorded.
4On completion, press RETURN twice.
1/JAN TUE 12:09
PR DAY START STOP
1 SA 9 12:00 12:50SP
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
RETURN DELETE:CLEAR
1/JAN TUE 12:09
PR DAY START STOP
1 SA 9 12:00 12:50SP
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
-- ---- --:--
→ --:----
RETURN DELETE:CLEAR
3
VCR
VCR
VCR
VCR
VCR
32
3

GB
3534
Playing a Sequence Frame by Frame
Playing a Sequence at Variable Speeds
You can:
◆Stop the cassette at a given frame (image)
◆Advance one frame at a time
➢No sound is heard when playing back frame by frame.
1Press:
◆ ll to start playing the cassette
◆ ll to still the tape at a given frame
◆Turn the JOG Dial to advance frame by frame
2To return to normal playback, press ll .
☛When you have been using the Frame-by-Frame function
for more than about five minutes, the DVD-VCR will
automatically play to protect the cassette and video
heads.
➢Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
PROG/TRK buttons to minimize this effect.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢No sound is heard when playing a sequence at variable
speeds.
1Press:
◆ ll during playback
◆Turn the SHUTTLE dial to left to play the cassette backwards
◆Turn the SHUTTLE dial to right to play the cassette forwards
2The speed is changed as shown in the following illustration.
REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY
PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X5 X9
X9 X5 X3 X1/10 X1/5
Selecting the Audio Output Mode
Playing a Cassette in Slow Motion
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO Used to listen to the sound on the normal mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
You can play a cassette in slow motion.
➢No sound is heard when playing back a cassette in slow
motion.
1Press:
◆ ll to start playing the cassette
◆
ll button one more time to make STILL mode.
◆to start SLOW mode.
◆
or
button as many times as required to decrease or
increase the speed respectively
◆To return to the normal speed, press the ll
button twice.
2When playing back in slow motion, picture interference may occur.
Press the PROG/TRK( or ) buttons to minimize this effect.
☛When you have been using the Slow Motion function for
more than about five minutes, the DVD-VCR will
automatically play to protect the:
◆Cassette
◆Video heads
L R MIX
L R MONO
VCR
VCR
VCR
VCR
2
2
1
1
1
1
1

36 37
GB GB
Picture Search, Fast Forward/Rewind
Searching for a Specific Sequence
Picture Search enables you to Fast Forward or Rewind and look for
a particular part of a tape.
1Press PLAY, the VCR will enter normal play mode. While in play,
press and release the (or ) button. The VCR will search at 5
times the normal playback speed.
2To return to normal playback mode, press the
II
button.
3If you press and HOLD down the (or ) button the VCR will
search at 9 times the normal speed. Releasing the button will
return the VCR to search at 5 times the normal speed. To return to
normal playback mode, press the
II
button.
4Whilst in Picture Search mode, if you press the button again,
the VCR will enter normal Fast Forward mode.
5Likewise, whilst in Picture Search mode, if you press the
button again, the VCR will enter normal Rewind mode.
6If, when Redwinding ( ) or Fast Forwarding ( ), you press the
(or ) button, the VCR will enter the Picture Search mode.
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INTRO SCAN
1To search for a specific index, press INDEX.
2Press the
or buttons depending on the direction
where your desired programme is located.
3 When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index mark.
4 If you want to watch the tape from a particular Index, simply press
II
.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
1Press the INDEX to start the Index search.
2Press the
or buttons twice more. This will take
you directly to the start of the desired programme is located.
3These Index searches can be made forwards: (press ) or
backwards: (press ).
4 To cancel an Index search simply press the
II
or
■
button.
2 1 1 2
etc. Prev
Seq. Seq. being
played Next
Seq. etc.
VCR
VCR
Using the Tape Counter
The tape counter:
◆Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆Is reset when a cassette is inserted in the DVD-VCR
◆Allows you to find the beginning of a sequence easily
☛If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1Insert a cassette in your DVD-VCR.
2To set the tape counter to zero at the beginning of a sequence:
◆Press DISPLAY twice to display the counter
◆Press CLEARwhen you want to set the tape counter to zero
3When you are ready,
◆Start playback or Recording.
◆Press the
■
button.
◆To fast-forward or rewind to the sequence at which the
counter was set to zero, press or .
➢Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 28).
Press DISPLAY:
◆Once to display the current function, programme
number, recording speed, date, time and counter
◆Twice to display the counter only
◆Three times to display the time remaining on the
cassette
◆Four times to clear the display
0:00:00
VCR
22
INDEX :
INDEX SEARCH : - 6
1