Samsung EO-PN900 User manual

www.samsung.com
User Manual
EO-PN900
05/2015. Rev.1.0

Table of Contents
English(UK)
Français
Deutsch
Italiano
Español
Magyar
Polski
Română
Български
Hrvatski
Srpski
Português
Latviešu
Lietuvių kalba
Eesti
Nederlands
Svenska
Norsk
Suomi
Dansk
Ελληνικά
Slovenščina
Türkçe
Русский
Українська
Қазақ тілі
English(USA)
Español(Castellano)
简体中文
繁體中文(香港)
繁體中文(台灣)
Français(Canada)
Português(Brasil)
한국어



3
Read me first
Please read this manual before using the device to ensure safe and proper use.
Images may differ in appearance from the actual product. Content is subject to change
without prior notice.
Instructional icons
Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Note: notes, usage tips, or additional information
English(UK)
1

4
Getting started
Package contents
Check the product box for the following items:
•
Device
•
Pouch
•
USB cable
•
3.5 mm audio cable
•
Quick start guide
•
The items supplied with the device and any available accessories may vary
depending on the region or service provider.
•
The supplied items are designed only for this device and may not be compatible
with other devices.
•
Appearances and specifications are subject to change without prior notice.
•
You can purchase additional accessories from your local Samsung retailer. Make
sure they are compatible with the device before purchase.
•
Use only Samsung-approved accessories. Using unapproved accessories may cause
the performance problems and malfunctions that are not covered by the warranty.
•
Availability of all accessories is subject to change depending entirely on
manufacturing companies. For more information about available accessories, refer
to the Samsung website.
English(UK)
2

Getting started
5
Device layout
NFC antenna
Charger jack
Microphone
Noise-cancelling
microphone
Headband
Ear pad
Noise-cancelling
switch
Power switch
Notification light
Touch pad
Audio cable jack
Noise-cancelling
microphone
Adjustable slider /
Hinge
English(UK)
3

Getting started
6
Charging the battery
This device has a built-in battery. Before using the device for the first time or when the battery
has been unused for extended periods, you must charge the battery.
Use only Samsung-approved chargers and cables. Unapproved chargers or cables can
cause the battery to explode or damage the device.
If the battery is completely discharged, the headset cannot be turned on immediately
when the charger is connected. Allow a depleted battery to charge for a few minutes
before turning on the headset.
Connect the device to a computer or the USB power adaptor via the USB cable.
•
The notification light turns red while the device is being charged. The notification light
turns green when charging is complete.
Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
•
The device can be used while it is charging, but it may take longer to fully charge
the battery.
•
While charging, the device may heat up. This is normal and should not affect the
device’s lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
•
If the device is not charging properly, take the device and the charger to a
Samsung Service Centre.
English(UK)
4

Getting started
7
After fully charging, disconnect the device from the charger. First unplug the charger from the
device, and then unplug it from the electric socket.
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
Turning the device on or off
Slide the Power switch up to turn on the device.
ON OFF Pairing mode
English(UK)
5

8
Using the device
Notices for using Bluetooth
•
When the device is connected to another device via a wireless connection, place your
device near to the connected device. Otherwise, the device may not work properly or it
may be affected by signal interference.
•
Ensure that your device and the other Bluetooth device are within the maximum
Bluetooth range (10 m). The range may change depending on the environment the
device is used in.
•
Ensure that there are no obstacles between your device and a connected device while
using a wireless connection. Obstacles include walls and fences. If there are obstacles
between the devices, the operating distance may be reduced.
•
Ensure that the Bluetooth antenna on the connected device is not covered or obstructed.
•
Bluetooth uses the same frequency as some industrial, scientific, medical, and low power
products and interference may occur when making connections near these types of
products.
•
Some devices, especially those that are not tested or approved by the Bluetooth SIG, may
be incompatible with your device.
•
Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of
files or illegally tapping communications for commercial purposes). Samsung is not
responsible for the repercussion of illegal use of the Bluetooth feature.
English(UK)
6

Using the device
9
Registering the device and connecting via the
Bluetooth feature
Connecting via the NFC feature
1 Other device Activate the NFC and Bluetooth features on the other device.
2 Level On Turn on the headset and place the other device’s NFC antenna near the NFC
antenna area ( ) of the headset.
Device connection is complete after you allow the other device to connect to your
headset.
Connecting devices manually
1 Level On Slide the Power switch to pairing mode and hold it for 3 seconds.
The headset enters the Bluetooth pairing mode and the notification light flashes red,
green, and then blue.
2 Other device On the Bluetooth-enabled device, activate the Bluetooth feature and
select
Samsung Level On from the detected device list.
English(UK)
7

Using the device
10
•
Once devices are paired, recently connected devices automatically connect to your
headset whenever you turn it on.
•
The NFC antenna area and the method for connecting via the Bluetooth feature
may differ depending on the device. For more information, refer to the device’s
user manual.
Connecting to two devices
The headset can connect to two Bluetooth-enabled devices at the same time.
When you connect the headset to two devices, the last device you connect is recognised as
the primary device. The other device is recognised as the secondary device.
1 Connect the headset and the primary device via Bluetooth by using the NFC feature or by
connecting manually.
2 Slide the Power switch to pairing mode and hold it for 3 seconds.
The headset will enter Bluetooth pairing mode and the primary device will be
disconnected.
3 Repeat the first step to connect the headset to the secondary device.
4 Repeat the first step to reconnect the headset to the primary device.
•
When the two connected devices play music simultaneously, the headset streams
audio from the device that first started playing. When you pause the currently
playing file, the file playing on the other device will play automatically.
•
This feature may not be supported on some devices.
Disconnecting from other devices
Turn off the headset or deactivate the Bluetooth feature. Alternatively, place the connected
device’s NFC antenna near the NFC antenna area ( ) of the headset.
English(UK)
8