Samsung Level on pro EO-PN920 User manual

www.samsung.com
User Manual
09/2015. Rev.1.0
EO-PN920

Table of Contents
English (UK)
Français
Deutsch
Italiano
Español
Magyar
Polski
Română
Български
Hrvatski
Srpski
Português
Latviešu
Lietuvių kalba
Eesti
Nederlands
Svenska
Norsk
Suomi
Dansk
Ελληνικά
Slovenščina
Türkçe


Русский
Українська
Қазақ тілі
English (USA)
Español (Castellano)
简体中文
Français (Canada)
Português (Brasil)
한국어

3
Read me first
Please read this manual before using the device to ensure safe and proper use.
•
Images may differ in appearance from the actual product. Content is subject to change
without prior notice.
•
Before connecting the headset to your other device, make sure the other device is
compatible with the headset.
Instructional icons
Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Notice: notes, usage tips, or additional information
English (UK)
1

4
Getting started
Package contents
Check the product box for the following items:
•
Headset
•
Quick start guide
•
The items supplied with the device and any available accessories may vary
depending on the region or service provider.
•
The supplied items are designed only for this device and may not be compatible
with other devices.
•
Appearances and specifications are subject to change without prior notice.
•
You can purchase additional accessories from your local Samsung retailer. Make
sure they are compatible with the device before purchase.
•
Use only Samsung-approved accessories. Using unapproved accessories may cause
the performance problems and malfunctions that are not covered by the warranty.
•
Availability of all accessories is subject to change depending entirely on
manufacturing companies. For more information about available accessories, refer
to the Samsung website.
English (UK)
2

Getting started
5
Device layout
NFC antenna
Charger jack
Microphone
Noise-cancelling
microphone
Headband
Ear pad
Noise-cancelling
switch
Power switch
Notification light
Touchpad
Audio jack
Noise-cancelling
microphone
Adjustable slider /
Hinge
Buttons and functions
Name Function
Power switch
•
Slide to turn the headset on or off.
•
Slide upwards and hold for approximately three seconds to enter
Bluetooth pairing mode.
Noise-cancelling
switch
•
Slide upwards to activate the noise-cancelling feature.
English (UK)
3

Getting started
6
Charging the battery
This headset has a built-in battery. Before using the headset for the first time or when the
battery has been unused for extended periods, you must charge the battery.
Use only Samsung-approved chargers and cables. Unapproved chargers or cables can
cause the battery to explode or damage the headset.
If the battery is completely discharged, the headset cannot be turned on immediately
when the charger is connected. Allow a depleted battery to charge for a few minutes
before turning on the headset.
Connect the headset to a computer or the USB power adaptor via the USB cable. Plug the USB
power adaptor into an electric socket.
•
The notification light turns red while the headset is being charged. The notification light
turns green when charging is complete.
Connecting the charger improperly may cause serious damage to the headset. Any
damage caused by misuse is not covered by the warranty.
•
You can charge the headset using the charger (sold separately).
•
The headset can be used while it is charging, but it may take longer to fully charge
the battery.
•
While charging, the headset may heat up. This is normal and should not affect the
headset’s lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
•
If the headset is not charging properly, take the headset and the charger to a
Samsung Service Centre.
English (UK)
4

Getting started
7
After fully charging, first unplug the USB cable from the headset, and then unplug it from the
computer or the electric socket.
•
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
•
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Turning the headset on or off
•
: ON
•
: OFF
•
: Bluetooth pairing mode
Follow all posted warnings and directions from authorised personnel in areas where
the use of wireless devices is restricted, such as aeroplanes and hospitals.
Notification light identification
The notification light alerts you to the headset’s status.
Status Colour
Power on
•
Flashes blue three times
Bluetooth pairing
mode
•
Flashes red, green, and blue
Connected via
Bluetooth
•
Quickly flashes blue three times (If the remaining battery power is
less than 10%, the light flashes red.)
Charging
•
Continuously on red
Fully charged
•
Continuously on green
English (UK)
5

Getting started
8
Status Colour
Noise-cancelling
activated
•
Flashes green three times
Noise-cancelling
deactivated
•
Flashes yellow three times
Power off
•
Flashes red three times
During use or in
sleep mode
•
Off (If the remaining battery power is less than 10%, the light
continuously flashes red.)
•
If the notification light does not work as described, disconnect the charger from
the headset and reconnect it.
•
The notification light may work differently depending on the connected device.
English (UK)
6

9
Using the headset
Bluetooth
About Bluetooth
Bluetooth is a wireless technology standard that uses a 2.4 GHz frequency to connect to
various devices over short distances. It can connect and exchange data with other Bluetooth
enabled devices, such as mobile devices, computers, printers, and other digital home
appliances, without connecting via cables.
Notices for using Bluetooth
•
To avoid problems when connecting your headset to another device, place the devices
close to each other.
•
Ensure that your headset and the other Bluetooth device are within the Bluetooth
connection range (10 m). The distance may vary depending on the environment the
devices are used in.
•
Ensure that there are no obstacles between the headset and a connected device,
including human bodies, walls, corners, or fences.
•
Do not touch the Bluetooth antenna of a connected device.
•
Bluetooth uses the same frequency as some industrial, scientific, medical, and low power
products and interference may occur when making connections near these types of
products.
•
Some devices, especially those that are not tested or approved by the Bluetooth SIG, may
be incompatible with your headset.
•
Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files
or illegally tapping communications for commercial purposes).
English (UK)
7

Using the headset
10
Connecting to another device
Connecting via Bluetooth using the NFC feature
1 Other device Activate the NFC feature.
2 Headset Slide the Power switch to the centre position to turn on the headset.
3 Headset Place the other device’s NFC antenna near the NFC antenna area ( ) of the
headset.
The devices will be connected when the other device accepts the Bluetooth connection
request. Refer to the other device’s user manual for more information.
English (UK)
8