Samsung ELSR362-00004 User manual

Australia (Eng.) 05/2015. Rev1.1
Installation Manual
RES 3.6 kWh All In One
CAUTION
Do not operate with other components not approved by the ESS systems.
(Connecting other products in parallel to Samsung SDI's products may result in
abnormal operation.)
The internet connection is required to use all functions of the ESS system.
If you have a problem, please contact the installer.
The Specications of the product may be modied without prior notice to improve
product quality.
ELSR362-00004

Table of Contents
Table of Contents
Table of Contents......................................................................................................... i
Table of Tables ........................................................................................................... iv
Table of Figures........................................................................................................... v
1. About this Manual ................................................................................................. 1
1.1 Valid Range.................................................................................................................................................1
1.2 Target Group ..............................................................................................................................................1
1.3 Manual Storage.........................................................................................................................................1
1.4 Symbols Used ............................................................................................................................................1
2. Safety...................................................................................................................... 4
2.1 Intended Use..............................................................................................................................................4
2.2 Safety Precautions....................................................................................................................................6
2.3 Product Overview.....................................................................................................................................7
2.3.1 Basic Specifications ....................................................................................................................8
2.3.2 Grounding the PV Inverter.......................................................................................................8
3. Package Removal and Inspection ......................................................................... 9
3.1 Package Removal and Tray Assembly.................................................................................................9
3.1.1 Removing the Enclosure Package .........................................................................................9
3.1.2 Removing the Battery Tray Package................................................................................... 10
3.1.3 Checking Components on the Packing List......................................................................11
3.1.4 Assembling the Battery Tray................................................................................................. 12
3.2 Checking for damage in Delivery ..................................................................................................... 12
3.3 Identifying Samsung 3.6 kWh All in One ........................................................................................ 12
4. Installation ........................................................................................................... 14
4.1 Selection of Installation Location..................................................................................................... 14
4.1.1 Dimensions and Weight......................................................................................................... 15
4.1.2 Ambient Conditions and Temperatures............................................................................ 15
4.1.3 Minimum Clearance................................................................................................................ 15
4.1.4 Position (Location Selection)................................................................................................ 16
4.2 Mounting Instructions ......................................................................................................................... 17
5. Electrical Connections ......................................................................................... 20
5.1 The Overview of Electrical Connection........................................................................................... 21
5.2 Opening the Front Case Cover .......................................................................................................... 26
5.3 The Overview of the ConnectionArea............................................................................................ 27
5.4 Battery Installation................................................................................................................................ 28
5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS) .............................. 30
5.6 Closing the Front Case Cover............................................................................................................. 32
5.7 A Method of Locking the Distribution Box (Board)..................................................................... 35
Australia (Eng.) 05/2015. Rev1.1 i

Table of Contents
5.7.1 AC Circuit Breaker and DC Disconnect Switch................................................................ 36
5.7.2 RCD (residual current device) Leakage Circuit Breaker................................................ 36
5.8 An Installation Method of Energy Meter Electrical Connection.............................................. 37
5.9 A Connecting Method of the DC Line from the PV ..................................................................... 37
6. Communication Connection ............................................................................... 42
6.1 Internet Connection ............................................................................................................................. 42
6.1.1 Components.............................................................................................................................. 42
6.1.2 Connection Block Diagram................................................................................................... 42
6.1.3 Connection Method................................................................................................................ 42
6.2 Energy Meter Connection................................................................................................................... 42
6.2.1 D0 Interface ............................................................................................................................... 42
6.2.2 RS485 Interface......................................................................................................................... 43
6.3 Recommended Energy Meter List.................................................................................................... 45
6.4 The Communication Terminal ........................................................................................................... 45
6.5 Homepage............................................................................................................................................... 46
6.5.1 Service Terms............................................................................................................................. 46
6.5.2 Membership .............................................................................................................................. 46
6.5.3 Membership Withdrawal ....................................................................................................... 46
6.5.4 Log-In........................................................................................................................................... 46
6.5.5 Password Initialization............................................................................................................ 47
6.5.6 Types of Service Offered........................................................................................................ 47
6.5.7 Mobile Service .......................................................................................................................... 50
7. Entering Initial Installation Information ............................................................ 51
7.1 Information Input Administrator ...................................................................................................... 51
7.2 System Information input stage ....................................................................................................... 51
7.3 PC Direct Connection and Local Setting Value............................................................................. 51
7.3.1 PC Direct Connection Flow................................................................................................... 51
7.3.2 Inserting Jumper Wire ............................................................................................................ 52
7.3.3 LAN Cable Connection between PC and System........................................................... 52
7.3.4 SIM (System Install Manager) Connection ....................................................................... 52
7.3.5 Entering Setting Value............................................................................................................ 54
7.4 Web Page Connection.......................................................................................................................... 55
7.4.1 Web Page Connection............................................................................................................ 55
7.4.2 Login & “ESS List ”menu ........................................................................................................ 55
7.4.3 Adding New ESS Information............................................................................................... 55
7.4.4 Checking the Current Status of ESS.................................................................................... 57
7.4.5 Changing Inverter’s Feed-In Setting .................................................................................. 57
7.4.6 Changing the Inverter’s Output Setting ........................................................................... 59
8. Operation Test ..................................................................................................... 60
8.1 Starting the System............................................................................................................................... 60
8.2 Turning off the System......................................................................................................................... 60
8.3 Descriptions of Operation Mode ...................................................................................................... 61
8.3.1 PV-Auto Mode........................................................................................................................... 61
ii Australia (Eng.) 05/2015. Rev1.1

Table of Contents
8.3.2 PV-Only Mode ........................................................................................................................... 62
8.3.3 Battery-Discharge Mode........................................................................................................ 62
8.3.4 Standby Mode........................................................................................................................... 63
8.3.5 Forced-Charge Mode (Maintenance mode) .................................................................... 63
8.3.6 Stand-Alone Mode .................................................................................................................. 63
8.3.7 Event Check Mode................................................................................................................... 64
8.3.8 Application Download Mode............................................................................................... 68
9. Problem Confirmation......................................................................................... 69
9.1 General Events........................................................................................................................................ 69
9.1.1 INVERTER General Events (Warnings)................................................................................ 69
9.1.2 INVERTER General Events (Protection) .............................................................................. 70
9.1.3 Battery Discharge General Events ...................................................................................... 72
9.1.4 PV General Events (Protection)............................................................................................ 73
9.1.5 System General Events (Protection)................................................................................... 75
9.1.6 BMS General Events ................................................................................................................ 75
9.1.7 EMS/Communication Events................................................................................................ 77
9.1.8 Single Fault Events................................................................................................................... 77
9.2 Significant Events .................................................................................................................................. 78
10.Maintenance ........................................................................................................ 80
10.1 Cleaning the Fan and the Cover........................................................................................................ 80
10.2 Checking and Exchanging Various Components ........................................................................ 82
10.2.1 Fuse Check ................................................................................................................................. 82
10.2.2 Input / Output Terminal Check............................................................................................ 82
10.2.3 DC Link Check ........................................................................................................................... 82
10.2.4 FAN Operation Check ............................................................................................................. 83
10.3 Battery Maintenance ............................................................................................................................ 84
10.3.1 Checking Battery Problem .................................................................................................... 84
10.3.2 Battery Exchange Procedure ................................................................................................ 84
10.4 The List of Replaceable Parts ............................................................................................................. 86
10.4.1 Li-Ion Battery Tray .................................................................................................................... 86
10.4.2 PV Connector ............................................................................................................................ 87
10.4.3 FAN 1 & FAN 2............................................................................................................................ 87
11.Technical Specifications ...................................................................................... 88
12.Disassembly ......................................................................................................... 92
12.1 Disassembly ............................................................................................................................................ 92
12.1.1 Removing Electric Connection ............................................................................................ 92
12.1.2 Disassembling the Main Body of 3.6 kWh All in One .................................................... 92
12.2 Packaging................................................................................................................................................. 93
12.3 Storage...................................................................................................................................................... 93
12.4 Disposal .................................................................................................................................................... 93
13.Contact ................................................................................................................. 94
Australia (Eng.) 05/2015. Rev1.1 iii

Table of Tables
Table of Tables
[Table 1-1: Symbol Description]....................................................................................................................3
[Table 2-1: Part Description]...........................................................................................................................7
[Table 2-2: Basic Specifications].....................................................................................................................8
[Table 3-1: Component Description] ........................................................................................................ 11
[Table 4-1: Weight of All in One] ................................................................................................................ 15
[Table 4-2: Specifications for anchor bolt] .............................................................................................. 17
[Table 5-1: Component Description] ........................................................................................................ 23
[Table 5-2: Part List]........................................................................................................................................ 25
[Table 5-3: Front Case Open Process] ....................................................................................................... 26
[Table 5-4: Front and Rear view of All in One]........................................................................................ 27
[Table 5-5: Circuit breaker, DC Disconnection Switch and power line specification]................ 36
[Table 5-6: RCD Leakage circuit breaker description].......................................................................... 36
[Table 5-7: Wire Standard]............................................................................................................................ 38
[Table 6-1: Recommended Meter List] ..................................................................................................... 45
[Table 7-1: Registration Item list] ............................................................................................................... 57
[Table 9-1: Inverter general events warning list]................................................................................... 70
[Table 9-2: Inverter protection list]............................................................................................................ 72
[Table 9-3: Battery operation general events list .................................................................................. 73
[Table 9-4: PV general events protection list] ........................................................................................ 74
[Table 9-5: System general events protection list] ............................................................................... 75
[Table 9-6: BMS general events list] .......................................................................................................... 77
[Table 9-7: EMS/communication events list].......................................................................................... 77
[Table 9-8: Single fault events list]............................................................................................................. 78
[Table 9-9: Significant events list] .............................................................................................................. 79
[Table 10-1: Replaceable parts list]............................................................................................................ 86
[Table 11-1: Technical specifications]....................................................................................................... 89
iv Australia (Eng.) 05/2015. Rev1.1

Table of Figures
Table of Figures
[Figure 2-1: Connection Diagram] ................................................................................................................5
[Figure 2-2: Part View of Samsung All in One] ..........................................................................................7
[Figure 3-1: Process for the enclosure package removal]................................................................... 10
[Figure 3-2: Process for the battery package removal] ....................................................................... 10
[Figure 3-3: Packing List]............................................................................................................................... 11
[Figure 3-4: Process for the battery assembly]....................................................................................... 12
[Figure 3-5: Name Plate] ............................................................................................................................... 13
[Figure 4-1: Dimension of All in One]........................................................................................................ 15
[Figure 4-2: Minimum Clearance for All in One].................................................................................... 16
[Figure 4-3: Restriction for the surface gradient].................................................................................. 16
[Figure 4-4: Spanner for fastening anchor nuts] ................................................................................... 17
[Figure 4-5: Anchor Bolt]............................................................................................................................... 17
[Figure 4-6: A Flat head driver for the front cover knob (larger than 10mm)] ............................. 18
[Figure 4-7: The Plus head driver (No.2) for the tray, the side cover, and grounding] .............. 18
[Figure 4-8: A spanner for fastening use] ................................................................................................ 18
[Figure 4-9: A fork lifter with height of 85-200mm] ............................................................................. 19
[Figure 5-1: Electrical connections] ........................................................................................................... 21
[Figure 5-2: PV connections]........................................................................................................................ 22
[Figure 5-3: Front Inside View].................................................................................................................... 24
[Figure 5-4: Rear Inside View]...................................................................................................................... 24
[Figure 5-5: Side View]................................................................................................................................... 25
[Figure 5-6: Rear Inside View]...................................................................................................................... 28
[Figure 5-7: Battery Tray Rear View] .......................................................................................................... 28
[Figure 5-8: Battery Connection]................................................................................................................ 28
[Figure 5-9: Battery Docking description] ............................................................................................... 29
[Figure 5-10: Battery to BMS Connection]............................................................................................... 30
[Figure 5-11: Cable Stuff Method].............................................................................................................. 30
[Figure 5-12: Battery Power Connection]................................................................................................ 31
[Figure 5-13: Front Cover Assembly process 1] ..................................................................................... 32
[Figure 5-14: Front Cover Assembly process 2] ..................................................................................... 33
[Figure 5-15: Front Cover Assembly process 3] ..................................................................................... 33
[Figure 5-16: Front Cover Assembly process 4] ..................................................................................... 34
[Figure 5-17: Distribution box connection diagram]........................................................................... 35
[Figure 5-18: Electric cable connection for energy meter installation].......................................... 37
[Figure 5-19: PV connector (Female) and PV line (Male)] ................................................................... 38
[Figure 5-20: Side cover opening].............................................................................................................. 38
[Figure 5-21: PV connector connection (MC4 connector connection)] ......................................... 39
[Figure 5-22: L and N AC line connection method].............................................................................. 39
[Figure 5-23: Terminal Block]....................................................................................................................... 40
[Figure 5-24: Power Cable connection to the terminal block].......................................................... 40
[Figure 5-25: Side view after side cover assembly]............................................................................... 41
[Figure 6-1: Internet Connection] .............................................................................................................. 42
[Figure 6-2: Bi-directional D0 Meter Connection]................................................................................. 43
[Figure 6-3: Bi-directional RS485 Meter Connection (For EM24)] .................................................... 44
[Figure 6-4: RS485 terminal block]............................................................................................................. 44
[Figure 6-5: Communication terminal]..................................................................................................... 45
[Figure 6-6: Log-in page] .............................................................................................................................. 46
[Figure 6-7: Password initialization page]............................................................................................... 47
[Figure 6-8: Monitoring page]..................................................................................................................... 48
Australia (Eng.) 05/2015. Rev1.1 v

Table of Figures
[Figure 6-9: Consumption report page]................................................................................................... 48
[Figure 6-10: Forecast page]........................................................................................................................ 49
[Figure 6-11: Setting page] .......................................................................................................................... 50
[Figure 6-12: Mobile service page] ............................................................................................................ 50
[Figure 7-1: Jumper]....................................................................................................................................... 52
[Figure 7-2: Initial setup page].................................................................................................................... 53
[Figure 7-3: Engineer log in page] ............................................................................................................. 55
[Figure 7-4: New ESS add page] ................................................................................................................. 56
[Figure 7-5: ESS status page] ....................................................................................................................... 57
[Figure 7-6: Inverter feed in limit setup page] ....................................................................................... 58
[Figure 7-7: ESS status detail information page]................................................................................... 58
[Figure 7-8: ESS output setup page] ......................................................................................................... 59
[Figure 7-9: PCS information page]........................................................................................................... 59
[Figure 8-1: Initial indication screen on power on]............................................................................... 60
[Figure 8-2: Standby state indication screen before the EMS command]..................................... 60
[Figure 8-3: PV generation, battery charge, Load use, sell remaining amount].......................... 61
[Figure 8-4: PV generation, battery discharge, Load use, buy shortage amount] ...................... 61
[Figure 8-5: PV generation, Battery standby, Load use, sell remaining amount]........................ 61
[Figure 8-6: PV generation, Sell remaining amount]............................................................................ 62
[Figure 8-7: PV generation, Buy shortage amount].............................................................................. 62
[Figure 8-8: Battery discharge, Load use] ................................................................................................ 62
[Figure 8-9: Battery discharge, Load use, Buy shortage amount].................................................... 62
[Figure 8-10: Indication screen on Standby Mode].............................................................................. 63
[Figure 8-11: Indication screen on Forced charged Mode]................................................................ 63
[Figure 8-12: Indication screen on stand-alone mode]....................................................................... 63
[Figure 8-13: Event occurrence, Grid RMS over current protection]............................................... 64
[Figure 8-14: Event occurrence, DC link over voltage protection]................................................... 64
[Figure 8-15: Event occurrence, PV string1 reverse connection protection]................................ 64
[Figure 8-16: Event occurrence, PV string2 reverse connection protection]................................ 64
[Figure 8-17: Event occurrence, PV string1 over voltage protection]............................................. 65
[Figure 8-18: Event occurrence, PV string1 over current protection] ............................................. 65
[Figure 8-19: Event occurrence, PV string2 over voltage protection]............................................. 65
[Figure 8-20: Event occurrence, PV string2 over current protection]............................................. 65
[Figure 8-21: Event occurrence, Battery over voltage protection] .................................................. 65
[Figure 8-22: Event occurrence, Battery over current protection]................................................... 66
[Figure 8-23: Event occurrence, On sequence Inverter DC link event]........................................... 66
[Figure 8-24: Event occurrence, On sequence Battery V/I event] .................................................... 66
[Figure 8-25: Event occurrence, Normal Inverter DC link event]...................................................... 66
[Figure 8-26: Event occurrence, Normal Battery V/I & BDC DC link event].................................... 66
[Figure 8-27: Event occurrence, On sequence Inverter DC link event]........................................... 67
[Figure 8-28: Event occurrence, Normal Inverter DC link & PV I event].......................................... 67
[Figure 8-29: Event occurrence, Temperature protection] ................................................................ 67
[Figure 8-30: Event occurrence, Over Current TZ Fault]...................................................................... 67
[Figure 8-31: Events occurrence, temperature sensor connection error] ..................................... 67
[Figure 8-32: Event occurrence, PV mis-wiring]..................................................................................... 68
[Figure 8-33: Event occurrence, SPI communication event] ............................................................. 68
[Figure 8-34: Event occurrence, Single fault event] ............................................................................. 68
[Figure 8-35: Event occurrence, Continuously 3 times Inverter fault]............................................ 68
[Figure 8-36: Indication screen on Application Download Mode] .................................................. 68
[Figure 10-1: PV MC4 connector] ............................................................................................................... 80
[Figure 10-2: Side cover removal].............................................................................................................. 81
[Figure 10-3: Fan removal] ........................................................................................................................... 81
[Figure 10-4: Li-Ion Battery tray (manufactured by SAMSUNG SDI)]............................................... 86
vi Australia (Eng.) 05/2015. Rev1.1

Table of Figures
[Figure 10-5: PV Connector (MC4)] ............................................................................................................ 87
[Figure 11-1: Derating Curve]...................................................................................................................... 90
[Figure 11-2: Power efficiency curve of System] ................................................................................... 90
[Figure 11-3: Power efficiency curve of PV Generation] ..................................................................... 91
Australia (Eng.) 05/2015. Rev1.1 vii

1. About this Manual
1. About this Manual
1.1 Valid Range
This is the installation manual for the 3.6 kWh All In One system. Please read this installation
and user manual carefully before installing and operating the 3.6 kWh all in one system.
It contains important safety instructions. The warranty will be void if you fail to follow the
instructions in this manual.
1.2 Target Group
This installation manual applies only to the Samsung 3.6 kWh All in One.
1.3 Manual Storage
The user manual and installation manual can be downloaded from the product download
section at “https://myess.samsungsdi.com”. The specifications of the product can be
changed for improvement without notice.
Also, the software can be updated automatically without notice over the Internet.
1.4 Symbols Used
Symbols Meaning
CAUTION
This symbol indicates a hazardous situation which could
result in a light injury, if not avoided.
NOTICE
This symbol indicates a hazardous situation which could
result in damage to the property, if not avoided.
Information
This symbol indicates valuable tips for optimum installation
and operation of the product.
Australia (Eng.) 05/2015. Rev1.1 1

1. About this Manual
Number Symbol Description
1
Direct current
2
Alternating current
3
Both direct and alternating current
4 Three-phase alternating current
5
Three-phase alternating current with neutral
conductor
6
Earth terminal
7
Protective conductor terminal
8
Frame or chassis terminal
9
Refer to the operating instructions
10
On (supply)
11
Off (supply)
12
Equipment protected throughout by double
insulation or reinforced insulation
13
Caution: Risk of Electric Shock
14
Caution: Hot Surface
2 Australia (Eng.) 05/2015. Rev1.1