Samsung LE32B460B2W User manual

English -4
Connecting a AV device
WY R
W YR
WR
W R
R
B
G
RBG
HD connection
DVD / Blu-Ray player / Cable Box
/ Satellite receiver (STB)
Using a DVI Cable
AUDIO OUTDVI OUT
HD connection
DVD / Blu-Ray player / HD Cable
Box / HD Satellite receiver (STB)
Using an HDMI Cable
HDMI OUT
Audio/Video connection
VCR
Using an Audio/Video Cable
AUDIO OUTVIDEO OUT
Component connection
DVD / Blu-Ray player / Cable
Box / Satellite receiver
Using a Component Cable
AUDIO OUT COMPONENT OUT
HDMI/DVI
PC/COMPONENT
EXT/VIDEO
Best
Normal
VCR / DVD
Using a Scart Cable
EXT
BN68-02365E_00Eng.indd 1 2009-05-18 �� 2:05:06

LCD TV
QUICK SETUP GUIDE
English - 1
The Supplied Accessoris
Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom
(M4 X L16)
Cleaning Cloth User Manual Stand Screw X 8
(32inch model only)
Installing Batteries in the Remote Control
BN68-02365E-00
BN68-02365E_00Eng.indd 2 2009-05-18 �� 2:05:06

Installing the Stand
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch model only.
Step 1. Attach your LCD TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling them.
To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left
of right sides of the TV.
Step 2. Fasten two screws at position 1 and then fasten two screw at position 2 .
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one
side.
Using the remote control buttons
MENU Button
Display the main on-screen menu.
ENTER E / DIRECTION Button
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN Button
Return to the previous menu.
EXIT
Exit the on-screen menu.
N
N
N
N
N
English - 2
Front
Back
2
1
Preset Step 1 Step 2
BN68-02365E_00Eng.indd 3 2009-05-18 �� 2:05:07

English - 3
Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting Setup → Plug & Play.
On the screen, you can set as follows.
The each step may vary depending on the Antenna source. N
Step 1 Step 2
Plug & Play
You can set the menu language.
Menu Language : English
U Move E Enter
▲
Nederlands
English
Eesti
▼
Plug & Play
Select 'Home Use' when installing this TV in your home.
L Move E Enter
Store Demo Home Use
Plug & Play
Select Country.
Country : English
U Move E Enter
▲
Switzerland
United Kingdom
CIS
▼
Plug & Play
Select the Antenna source to memorise.
U Move E Enter m Skip
Stert
Stert
Air
Cable
Plug & Play
Select the Channel source to memorise.
U Move E Enter m Skip
Stert
Stert
Stert
Digital & Analogue
Digital
Analogue
Plug & Play
Auto Store in progress.
Digital Channels : 5 Analogue Channels : 6
E Enter m Skip
Stop
Frequency 113 MHz
15%
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
U Move E Enter m Skip
Auto
Manual
Plug & Play
How to get the best perfotmance from your new HDTV
Step 1. Connect the HD Source Unit to the TV using the Component video (Red, Green,
Blue) and audio (Red, White) cables or HDMI Cable.
Step 2. Press the Source button on the Remote Control to select HDMI or Component
Input.
Depending on your location, HD programs may also be viewd using an RF antenna.
For more detalls, please refer to HD Connections in the Owner Manual.
E Enter
HD Cable
Component Cable
▼ HD box ▼ TV rear view
Plug & Play
Enjoy your TV.
OK
Step 3
Step 4 Step 5 Step 6
Step 7 Step 8 Step 9
BN68-02365E_00Eng.indd 4 2009-05-18 �� 2:05:08