Samsung LE46A966D1W User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02 201 2418 www.samsung.com/be
CZECH REPUBLIC
800 - SAMSUNG (800-726786) www.samsung.com/cz
Distributor pro Českou republiku:
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
DENMARK 8 - SAMSUNG (7267864) www.samsung.com/dk
EIRE 0818 717 100 www.samsung.com/ie
FINLAND 30 - 6227 515 www.samsung.com/
FRANCE 3260 'dites' SAMSUNG (€ 0,15/Min)
0825 08 65 65 (€ 0.15/Min) www.samsung.com/fr
GERMANY 01805 - SAMSUNG (7267864, € 0.14/Min) www.samsung.de
HUNGARY 06 - 80 - SAMSUNG (7267864) www.samsung.com/hu
ITALIA 800 - SAMSUNG (7267864) www.samsung.com/it
LUXEMBURG 02 261 03 710 www.samsung.com/lu
NETHERLANDS 0900 - SAMSUNG (7267864, € 0.10/Min) www.samsung.com/nl
NORWAY 3 - SAMSUNG (7267864) www.samsung.com/no
POLAND 0 - 801 - 1SAMSUNG (172678)
022 - 607 - 93 - 33 www.samsung.com/pl
PORTUGAL 808 20 - SAMSUNG (7267864) www.samsung.com/pt
SLOVAKIA 0800 - SAMSUNG (7267864) www.samsung.com/sk
SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es
SWEDEN 075 - SAMSUNG (726 78 64) www.samsung.com/se
SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch
U.K 0845 SAMSUNG (7267864) www.samsung.com/uk
TURKEY 444 77 11 www.samsung.com/tr
ESTONIA 800-7267 www.samsung.ee
LATVIA 8000-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
KAZAHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru
KYRGYZSTAN 00-800-500-55-500 -
RUSSIA 8-800-555-55-55 www.samsung.ru
TADJIKISTAN 8-10-800-500-55-500 -
UKRAINE 8-800-502-0000 www.samsung.ua
UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
BN68-01737B-00
BN68-01737B-ENG.indb 1 2008-09-10 �� 10:38:53

Digital TV (DVB-T) Notice
1. FUNCTIONALITIES RELATED TO DIGITAL TV (DVB) ARE ONLY AVAILABLE IN COUNTRIES OR AREAS WHERE DVB-T
(MPEG2 AND MPEG4 AVC) DIGITAL TERRESTRIAL SIGNALS ARE BROADCAST. DVB-T is the European consortium
standard for the broadcast transmission of digital terrestrial television. Please check with your local dealer about the availability
of DVB-T service in your area.
2. Although this TV set meets the current DVB-T standards as of [August, 2008], compatibility with future DVB-T digital terrestrial
broadcast cannot be guaranteed.
3. Some Digital TV functions may not be available or operate correctly in some countries or regions.
4. For more information, please contact your local SAMSUNG customer care centre.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back
cover for more information.)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention
is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right
and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console
may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-
images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
BN68-01737B-ENG.indb 2 2008-09-10 �� 10:38:53

English
N O T
Symbol Press Note One-Touch Button TOOL Button
English - 1
Connecting and Preparing Your TV
List of Parts .........................................................................2
Installing the Wall Mount Kit ................................................2
Viewing the Control Panel ...................................................3
Viewing the Connection Panel.............................................4
Remote Control ...................................................................6
Mini Remote Control............................................................7
Installing Batteries in the Remote Control ...........................7
Switching On and Off...........................................................8
Placing Your Television in Standby Mode............................8
Viewing the Menus ..............................................................8
Using the TOOLS Button.....................................................9
Using the Wheel button .......................................................9
Plug & Play Feature ..........................................................10
Channel Control
Storing Channels and channel .........................................11
Managing Channels ..........................................................14
Picture Control
Changing and Resetting the Picture Settings....................15
Viewing Picture-in-Picture .................................................18
PC Display.........................................................................19
Setting up the TV with your PC .........................................20
Sound Control
Changing the Sound Standard..........................................20
Selecting the Sound Mode ................................................22
Function Description
Conguring the Setup Menu..............................................22
Setting the Time ................................................................26
Network Connection ..........................................................27
Network Setup...................................................................29
Source List / Edit Name.....................................................30
Product Guide ...................................................................31
WISELINK Pro
Connecting a USB Device.................................................31
Using the WISELINK Pro Function....................................32
Using and Sorting Photo List.............................................34
Viewing a Photo or Slide Show ........................................35
Using and Sorting the Music List.......................................37
Playing a Music ................................................................38
Using and Sorting the Movie List.......................................39
Playing a Movie File .........................................................40
Deleting the Photo/Music/Movie File ................................41
Picture/Music Settings Using WISELINK Pro....................42
Using the Setup Menu.......................................................42
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
WISELINK Pro-DLNA
Setting the DLNA Network.................................................43
Installing the DLNA Application .........................................43
Using the DLNA Application ..............................................45
Using the DLNA Function ..................................................48
Content Library
Activating the Content Library ...........................................49
Using the Content Library..................................................50
Using Additional Content Using External USB Memory
Storage..............................................................................51
About Anynet+
Connecting Anynet+Devices ............................................52
Setting Up Anynet+...........................................................53
Scanning and Switching between Anynet+ Devices..........53
Recording ..........................................................................54
Listening through a Receiver (Home theater) ...................55
Troubleshooting for Anynet+............................................55
InfoLive
Using InfoLive....................................................................56
Using the Weather Service................................................57
Using the News Service ....................................................57
Using the Stock Service ....................................................57
InfoLive Setup ...................................................................58
Recommendations for Use
Teletext Feature.................................................................59
Setting Up Your Remote Control .......................................60
Remote Control Codes......................................................61
Auto Wall-Mount Adjustment (Sold separately)
(depending on the model) .................................................63
Using the Anti-Theft Kensington Lock
(depending on the model) .................................................64
Securing the TV to the Wall...............................................64
Troubleshooting: Before Contacting Service Personnel....65
Specications ....................................................................66
Additional Terms of Service...............................................67
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Contents
BN68-01737B-ENG.indb 1 2008-09-10 �� 10:38:53

English - 2
List of Parts
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control &
Batteries (AAA x 2)
Mini Remote Control &
Lithium battery (3V) Power Cord Cover-Bottom Program CD Cleaning Cloth
Owner’s Instructions • Warranty card • Safety Guide •
Warranty card / Safety Guide (Not available in all locations)
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For
detailed information on installing the wall mount, see the instructions provided with
the Wall Mount items. Contact a technician for assistance when installing the wall
mounted bracket. Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
Remove the stand and cover the bottom hole with a cap and fasten with two
screws.
N
N
Connecting and Preparing Your TV
1_BN68-01737B-Eng.indd 2 2008-09-10 �� 3:45:36

English - 3
1 SOURCE
E
Toggles between all the available input sources. In the
on-screen menu, use this button as you would use the
ENTER E button on the remote control.
2 MENU
Press to see an on-screen menu of your TV’s features.
3 –
=
+
Press to increase or decrease the volume.
In the on-screen menu, use the –
=
+ buttons as you
would use the ◄ and ► buttons on the remote control.
4
>
C/P.
P <
Press to change channels. In the on-screen menu, use
the
>
C/P.
P <
buttons as you would use the ▼ and ▲
buttons on the remote control.
5 POWER INDICATOR
Blinks and turns off when the power is on and lights up in
stand-by mode.
6
P
(POWER)
Press to turn the TV on and off.
7 REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8 SPEAKERS
Viewing the Control Panel
The product colour and shape may vary depending on the model. N
Front Panel buttons
Touch each button to operate.
88
4
1
2
3
6
5
7
1_BN68-01737B-Eng.indd 3 2008-09-10 �� 1:31:01

English - 4
Power Input
Viewing the Connection Panel
[TV Side Panel]
[TV Rear Panel]
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
2 COMPONENT IN
Connect component video cables (optional) to component connector (‘PR’, ‘PB’, ‘Y’) on the rear of your set and the other
ends to corresponding component video out connectors on the DTV or DVD.
If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (‘PR’, ‘PB’, ‘Y’) on your set.
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and
Cr.
Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out
connectors on the DTV or DVD.
3 HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
No additional Audio connection is needed for an HDMI to HDMI connection.
When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.
What is HDMI?
‘High Denition Multimedia interface’ allows the transmission of high denition digital video data and multiple channels
of digital audio.
The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD players / Cable Boxes /
Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there
is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks
on the back of the TV. If this happens, contact the company that provided the DVD player / Cable Box / Satellite receiver to
conrm the HDMI version, then request a rmware update. HDMI cables that are not 1.3 may cause annoying icker or no
screen display.
DVI IN(HDMI2) [R-AUDIO-L]
DVI audio outputs for external devices.
N
N
N
-
-
-
-
-
-
-
-
N
-
-
N
-
1 2 3 4
90!@#
5
6
3
7
8
BN68-01737B-ENG.indb 4 2008-09-10 �� 10:38:54

English - 5
Supported modes for HDMI / DVI and Component.
480i 480p 576i 576p 720p 1080i 1080p
HDMI / DVI 50Hz XXXOOOO
HDMI / DVI 60Hz XOX X OOO
Component OOOOOOO
4 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor
aerial / A cable television network / A satellite network
5 S-VIDEO IN
Connect S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect the audio cables to AV IN [R-AUDIO-L].
6 COMMON INTERFACE SLOT
When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your service provider.
When the channel information conguration has nished, the message ‘Updating Completed’ is displayed, indicating that the
channel list is now updated.
You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your
hands since dropping the CI CARD may cause damage to it.
Insert the CI-Card in the direction marked on it.
The place of the COMMON INTERFACE Slot may be different depending on its model.
7 WISELINK
Connect a USB mass storage device to view movies and photos and listen to music les.
You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).
8 AV IN
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V
device.
9 DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio
only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable / Satellite Box directly to
an Amplier or Home Theater, not the TV.
0 EXT 1, EXT 2
Connector Input Output
Video Audio (L / R) RGB Video + Audio (L / R)
EXT 1 O O O Only TV or DTV output is available.
EXT 2 O O Output you can choose.
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
! LAN
Connect a LAN cable to this port to connect to the Network.
@ SERVICE
Connector for Service only.
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your
remote control.
# KENSINGTON LOCK (depending on the model)
The Kensington Lock (optional) is a device used to physically x the system when used in a public place.
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
N
-
-
-
-
-
-
N
N
N
-
-
-
-
N
-
-
-
-
-
-
-
BN68-01737B-ENG.indb 5 2008-09-10 �� 10:38:54

English - 6
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
1 POWER
Television Standby button.
2 TV
Selects the TV mode directly.
3 NUMERIC BUTTONS
Number buttons for direct channel
access
4 −
One or more digit channel selection
5 VOLUME BUTTONS
+ :Volume increase
– : Volume decrease
6 SOURCE
Available source selection
7 GUIDE
Electronic Programme Guide (EPG)
display
8 TOOLS
Use to quickly select frequently used
functions.
9 INFO
Use to see information on the current
broadcast
0 COLOURS BUTTONS
Use these buttons in the Channel list
and WISELINK Pro, etc.
@ E.MODE
Press to select the optional display
and sound modes for sports, cinema
and games.
# Use these buttons in the DMA,
WISELINK Pro and Anynet+. (∏:
This remote can be used to control
recording on Samsung recorders with
the Anynet+ feature)
$ SET
Sets the remote to control your TV,
VCR, DVD, Cable Box or Set-Top
Box.
% MODE
Press to operate your TV, DVD, STB
or VCR (See page 60)
^ Pressing the ON/OFF @ light button
toggles between on and off. When
the remote control is on, and a key
is pressed on the remote control, the
remote control buttons will be lit for a
moment.
& PRE-CH
Previous channel
* MUTE
Temporary sound switch-off
( CHANNEL BUTTONS
P < : Next channel
P > : Previous channel
) MENU
Displays the main on-screen menu
a W.LINK
This function enables you to view and
play photo and music les from an
external device.
b RETURN
Returns to the previous menu
c  UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
E
Press the Up / Down / Left / Right
sections of the wheel button and
Enter to select on-screen menu items
and change menu values. You can
navigate up and down the menu,
switch channels and adjust the
volume by turning the wheel button.
d EXIT
Exit the on-screen menu
e DMA
Use this when connecting a
SAMSUNG DMA (Digital Media
Adapter) device through an HDMI
interface and switching to DMA mode.
(The DMA button is optional.) For
more information on the operating
procedures, refer to the user manual
of the DMA. This button is available
when “Anynet+(HDMI-CEC)” is “On”
(see page 53)
f INFO.L
Press to use the News, Stock Market
and Weather Forecast information
services available over the network.
g SUBT.
Digital subtitle display
h CONTENT
This function enables you to view
“Content Library”. (see page 49)
i RESET
When your remote does not work,
change the batteries and press the
RESET button for 2-3 seconds before
use.
Teletext Functions
2 :: Exit from the teletext display
6 0: Teletext mode selection (LIST /
FLOF)
7 8: Teletext store
8 4: Teletext size selection
9 5: Teletext reveal
0 Fastext topic selection
! /: Alternately select Teletext,
Double, or Mix.
% 1: Teletext sub page
& 2: Teletext next page
3: Teletext previous page
* 6: Teletext index
) 9: Teletext hold
b 7: Teletext cancel
TV
SET RESET
VCR DVD STB
N
BN68-01737B-ENG.indb 6 2008-09-10 �� 10:38:55

English - 7
Mini Remote Control
The Mini Remote Control is a simplied remote control that consists of the power,
channel and volume buttons only.
1 Television Standby button
This button only works when you press it for longer than 1.5 seconds.
2 < : Next channel
> : Previous channel
3 + : Volume increase
– : Volume decrease
4 IrDA transmitter
Use the Mini Remote Control so that this part faces the TV.
Installing Batteries in the Remote Control
Normal Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram
inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
Using the remote control with the ON / OFF @ light button set to on will
reduce the battery usage time.
Mini Remote Control
1. Turn the battery cover counterclockwise to unlock it and then separate the
battery cover.
2. Insert the corresponding 3V Lithium battery.
3. Place the battery cover into the remote control aligning it with the grooves and
then turn the battery cover clockwise to lock the cover.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
N
N
N
N
N
N
1
4
33
2
2
BN68-01737B-ENG.indb 7 2008-09-10 �� 10:38:55

English - 8
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
2. Press the
P
button on your set.
You also can press the POWER
P
button or the TV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up / down (< / >) button on the remote control or >C/P.
P
< button on your
set.
When you switch the set on for the very rst time, you will be asked to choose language in which the menus are to be
displayed.
4. To switch your set off, press the POWER
P
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
P
button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER
P
, numeric buttons (0~9), TV button or channel up / down (< / >)
button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
Viewing the Menus
1. With the power on, press the MENU button. The main menu appears on the
screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,
Application.
2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER
E
button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
N
N
N
N
N
N
N
TV
SET RESET
VCR DVD STB
Mode : Standard
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G / R) : G50 / R50
Detailed Settings
Picture
BN68-01737B-ENG.indb 8 2008-09-10 �� 10:38:55

English - 9
Using the Wheel button
To increase the channel number, turn the wheel clockwise when the
Channel Display is displayed. To decrease the channel number, turn the
wheel counterclockwise.
To turn the volume up, turn the wheel clockwise when the Volume
Control window is displayed. To turn the volume down, turn the wheel
counterclockwise.
To move to a lower menu, turn the wheel clockwise when the menu Display
is displayed. To move to a higher menu, turn the wheel counterclockwise.



Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and
easily. The “Tools” menu changes depending on which external input mode you are
viewing.
1. Press the TOOLS button. The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲ / ▼ / ◄ / ► / ENTER
E
buttons to display, change, or use the
selected items. For a more detailed description of each function, refer to the
corresponding page.
Anynet+ (HDMI-CEC): see page 53
Picture Size: see page 17
Picture Mode: see page 15
Sound Mode: see page 20
Sleep Timer: see page 26
SRS TS XT: see page 20
Energy Saving: see page 24
Dual l ll: see page 22
PIP: see page 18
Auto Adjustment: see page 20
•
•
•
•
•
•
•
•
•
•
TV
SET RESET
VCR DVD STB
TV
SET RESET
VCR DVD STB
Tools
Anynet+ (HDMI-CEC)
Picture Size : Auto Wide
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l ll : Mono
U Move E Enter e Exit
BN68-01737B-ENG.indb 9 2008-09-10 �� 10:38:56

English - 10
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER button on the remote control. The message “Valitse
calikkokieli, myymälädemo, kanavat ja kellonaika.” is displayed.
2. Press the ENTER
E
button, then “Valitse kuvaruutuvalikon kieli.” menu is
automatically displayed. Press the ENTER
E
button.
3. Select the appropriate language by pressing the ▲ or ▼ button. Press the
ENTER
E
button to conrm your choice.
4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the
ENTER
E
button.
We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
5. Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
E
button to
conrm your choice.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER
E
button to select “Start”. The settings
differ according to the selected country. For more details, refer to pages 10~11.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically.
Press the ENTER
E
button at any time to interrupt the memorization process.
After all the available channels are stored, the message “Set the Clock Mode.” is displayed.
7. Press the ENTER
E
button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTER
E
button.
If you select “Manual”, “Set current date and time” is displayed. (See page 26)
If you have received a digital signal, the time will be set automatically. If not, see page 26 to set the clock.
8. The message “Enjoy your viewing” is displayed. When you have nished, press the ENTER
E
button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select
“Setup”, then press the ENTER
E
button.
2. Press the ENTER
E
button again to select “Plug & Play”.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-
0-0’.
If you want to change PIN number, refer to page 22.
The “Plug & Play” feature is only available in the TV mode.
N
N
N
N
N
N
N
N
N
N
N
Setup
Plug & Play  ►
Language : English
Time
Network Selection : Cable
Wireless Network Setup
Cable Network Setup
Child Lock : On
Change PIN
Plug & Play
Valitse calikkokieli, myymälädemo, kanavat ja kellonaika.
OK
E Hyväksy
BN68-01737B-ENG.indb 10 2008-09-10 �� 10:38:56

English - 11
Channel Control
Storing Channels and channel
Country
Analogue Channel: You can change the country for analogue channels.
Digital Channel: You can change the country for digital channels.
The PIN number input screen appears. Enter your 4 digit PIN number.
Auto Store
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers may
not correspond to actual or desired programme numbers.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
Scans for all channels with active broadcast stations and stores them in the
TV’s memory.
If you want to stop Auto Store, press the ENTER
E
button.
The “Stop Auto Store?” message will be displayed.
Select “Yes” by pressing the ◄ or ► button, then press the ENTER
E
button.
If a channel is locked using the “Child Lock” function, the PIN input window
appears.
Digital & Analogue / Digital
The update procedures differ depending on the selected “Country”. Update the channel list by selecting an appropriate option.
When the “Country” was set to “Finland”
Press the ▲ or ▼ button to select “Cable” or “Air”. Press the ENTER
E
button. Press the ENTER
E
button to select
“Start”.
Cable: Scans cable channels.
Air: Scans aerial channels.
This product cannot scan both cable and aerial channels at the same time.
When it has nished, the number of scanned services will be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
When the “Country” was set to “Sweden”, or “Denmark”
Press the ▲ or ▼ button to select “Cable” or “Air”. Press the ENTER
E
button.
When selecting “Cable”
Network ID: Displays the network identication code.
Frequency: Displays the frequency for the channel. (Differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Press the red button to start the scan for digital services. When it has nished, channels are updated in the channel list.
When selecting “Air”
Press the ENTER
E
button to select “Start”
When the “Country” was set to “Norway”
Press the ENTER
E
button to select “Start”.
Analogue
Press the ENTER
E
button to select “Start”.
❑


N
❑
•
•
•
N
N
N
N
N

•
-
-
N
N
N
•
-
-
•

Channel
Channel List
Channel Mode : Added Ch.
Fine Tune ►
Signal Information
Channel
Country  ►
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
BN68-01737B-ENG.indb 11 2008-09-10 �� 10:38:56

English - 12
Manual Store
Scans for a channel manually and stores it in the TV’s memory.
If a channel is locked using the “Child Lock” function, the PIN input window appears.
Digital Channel
Manual store for digital channels. The update procedures differ depending on the selected “Country”. Update the channel list
by selecting the appropriate option.
When the “Country” was set to “Finland”
Press the ▲ or ▼ button to select “Cable” or “Air”, then press the ENTER
E
button.
When selecting “Cable”
Frequency: Displays the frequency for the channel. (Differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Press the ENTER
E
button to start the scan for digital services.
When it has nished, channels are updated in the channel list.
When selecting “Air”
Channel: Channel “1”to “9”in sequence are displayed (depending on the country)
Frequency: The frequency available in the Channel group is displayed.
Bandwidth: The available bandwidths are 8 MHz.
Press the ENTER
E
button to start the scan for digital services. When it has nished, channels are updated in the
channel list.
When the “Country” was set to “Sweden”, “Denmark”, or “Norway”
Channel: Channel “21” to “69” in sequence are displayed (depending on the country)
Frequency: The frequency available in the Channel group is displayed.
Bandwidth: The available bandwidths are 8 MHz.
Press the ENTER
E
button to start the scan for digital services.
When it has nished, channels are updated in the channel list.
Analogue Channel
Manual store for analogue channel.
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number
(0~9) buttons.
Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.
Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select “C” (Air channel) or
“S” (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the rst channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number): Set to “OK” by pressing the ENTER
E
button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in
this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this
mode.
Full Guide / Mini Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank
or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new
information becomes available.
For the detailed procedures on using “Full Guide” and “Mini Guide”, refer to the descriptions on page 12.
You can also display the guide menu simply by pressing the GUIDE button.
(To congure the “Default Guide”, refer to page 13)
Full Guide: Displays the programme information as time ordered One hour segments. Two hours of programme information
is displayed which may be scrolled forwards or backwards in time.
Mini Guide: The information of each programme is displayed by each line on the current channel Mini Guide screen from the
current programme onwards according to the programme starting time order.
❑
N
N

•
-
-
•

•
•
•
•
N
N
•
•
N
-
-
-
❑
N
O


TV
SET RESET
VCR DVD STB
BN68-01737B-ENG.indb 12 2008-09-10 �� 10:38:56

English - 13
Default Guide
Mini Guide / Full Guide: You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE
button on the remote control is pressed.
Channel List
For the detailed procedures on using the “Channel List”, refer to the descriptions on pages 14~15.
Channel Mode
When press the P>/< button, Channels will be switched within the selected channel list.
Added Ch: Channels will be switched within the memorized channel list.
Favourite Ch.: Channels will be switched within the favourite channel list.
Fine Tune
If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to ne tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in
the channel banner.
To reset the ne-tuning, select “Reset” by pressing the ▲ or ▼ button and then press the ENTER
E
button.
Only Analogue TV channels can be ne tuned.
Signal Information
You can get information about the signal status.
If the signal status is poor, the “Weak or No Signal” message is displayed.
While viewing a Digital channel, this function can be selected.
Using the Full / Mini Guide
To... Then...
Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.
Exit the guide Press the blue button
If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTER
E
button is pressed again, press the ◄,
► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone.
View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.
Then press the INFO button when the programme of your choice is highlighted.
The programme title is on the upper part of the screen center.
Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality
Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted
programme are included on the detailed information. ”...” will be appeared if the summary is long.
Toggle between the “Mini Guide” or “Full Guide” Press the red button repeatedly.
In Full Guide
Scrolls backwards quickly (24 hours).
Scrolls forwards quickly (24 hours). Press the green button repeatedly. Press the yellow button repeatedly.
In Mini Guide
Display next page quickly.
Display previous page quickly. Press the green button. Press the yellow button.
❑

❑
❑


❑
N
N
N
❑
N
N
Full Guide
DTV Cable 900 f tn 2:10 Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Today 2:00 - 3:00 3:00 - 4:00
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
900 f tn
901 ITV Play
902 Kerrang!
903 Kiss
903 oneword
903 Smash Hits!
▼
Street Hypn..
Kisstory
No Information
No Information
No Information
Freshmen O..
Watch
Information
 Mini Guide  +24 Hours  Exit
Mini Guide DTV Cable 900 f tn
Street Hypnosis
Booze Britain
2:00
2:30
5:00
▼
Freshmen On Campus
Watch
Information
 Full Guide  Next Page  Exit
BN68-01737B-ENG.indb 13 2008-09-10 �� 10:38:56

English - 14
Managing Channels
Using this menu, you can Add / Delete or set Favourite channels and use the
programme guide for digital broadcasts.
Select a channel in the “All Channels”, “Added Channels” or “Favourite” screen
by pressing the ▲ / ▼ buttons, and pressing the ENTER
E
button. Then you
can watch the selected channel.
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favourites: Shows all favourite channels.
Programmed: Shows all current reserved programmes.
Using the Colour buttons with the Channel List
Red (Channel Type): Toggle between your “TV”, “Radio”, “Data / Other” and “All”.
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
TOOLS (Option): Displays the “Delete” (or “Add”), “Add to Favourite” (or
“Delete from Favourite”), “Lock” (or “Unlock”), “Timer Viewing”, “Edit Channel
Name”, “Sort”, “Edit Channel Number”, “Select All”, “Deselect All” or “Auto
Store” menu. (The Options menus may differ depending on the situation.)
Channel Status Display Icons
AAn analogue channel. cA channel selected by pressing the yellow button.
♥
A channel set as a Favourite. (A programme currently being broadcast.
\A locked channel. )A reserved programme
Channel List Option Menu (in All Channels / Added Channels / Favourites)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown on “All Channels” menu.
A gray-coloured channel indicates the channel has been deleted.
The “Add” menu only appears for deleted channels.
You can also delete a channel to the “Added Channels” or “Favourite” menu
in the same manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
The “♥” symbol will be displayed and the channel will be set as a favourite.
All favourite channels will be shown on “Favourite” menu.
Lock / Unlock (When the “Country” was set to “Finland”, “Sweden”, or “Denmark”)
You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the “Child
Lock” is set to “on”. (see page 22)
The PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN, by selecting “Change PIN” from the menu.
The “\” symbol will be displayed and the channel will be locked.
Child Lock Setting (When the “Country” was set to “Norway”)
Off: Unlocks the Channel.
User: Locks the channel with the “Child Lock” function for the user congured period of time only. Select “User” and set the
On Time and the Off Time using the ▲, ▼ or the number button.
Always: Locks the channel with the “Child Lock” function until it is unselected by the user.
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel
List; even when you are watching another channel. To reserve a programme , set the current time rst. (See page 26.)
Only memorized channels can be reserved.
You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote
control.
N




N
-
-
-
-
N
N
N

N
N
N
N

N
N

N
N
N

•
•
•

N
N
Channel
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Fine Tune
Signal Information
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C --
A
3 ♥ C --
A
4 C --
A
5 C --
A
6 C --
A
7 C --
A
8 C --
Added Channels
All
 Channel Type  Zoom  Select
Option
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C --
A
3 C --
A
4 C --
A
5 C --
A
6 C --
A
7 C --
A
8 C --
All Channels
All
 Channel Type  Zoom  Select
Option
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
BN68-01737B-ENG.indb 14 2008-09-10 �� 10:38:56

English - 15
Reserving a programme will be shown on “Programmed” menu.
Digital Programme Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can
reserve a programme according to the procedures described above.
Edit Channel Name (only analogue channel)
Channels can labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.
Sort (only analogue channel)
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after
using the auto store.
Select All / Deselect All
Select All: You can select all the channels in the channel list.
Deselect All: You can deselect all the selected channels by pressing the yellow button.
You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple
channels at the same time. Select the required channels and press the yellow button to set all the selected channels at
the same time.
The c mark appears to the left of the selected channels.
You can only select “Deselect All” when there is a selected channel.
Auto Store
For further details on setting up options, refer to page 11.
If a channel is locked using the “Child Lock” function, the PIN input window appears.
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.
Change Info: Select to change a viewing reservation.
Cancel Schedules: Select to cancel a viewing reservation.
Information: Select to view a viewing reservation. (You can also change the
reservation information.)
Select All: Select all reserved programmes.
N
N

N


•
•
N
N
N

N
N
N




Picture Control
Changing and Resetting the Picture Settings
Mode
You can select the type of picture which best corresponds to your viewing
requirements.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for the optimum display in a normal
environment.
Movie: Selects the picture for viewing movies in a dark room.
Press the TOOLS button to display “Tools” menu. You can also set the
picture mode by selecting “Tools → Picture Mode”.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R)
Your television has several setting options that allow you to control the picture
quality.
Backlight: Adjusts the brightness of LCD back light.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture.
❑



T
❑



Programmed
1 / 1 / 2008
13:59 5 TV1 Quincy, M.E
18:59 2 TV3 The Equalizer
20:59 2 TV3 McMillan & Wife
21:59 2 TV3 M.Spillane’s mike Hammer
Change Info
Cancel Schedules
Information
Select All
All
 Channel Type  Zoom  Select
Option Information
Mode :Standard ►
Backlight : 5
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint(G/R) : G50 / R50
Detailed Settings
Picture
Colour : 50
Tint (G / R) : G50 / R50
DetailedSettings  ►
Picture Options
Picture Reset
Picture
BN68-01737B-ENG.indb 15 2008-09-10 �� 10:38:57

English - 16
Sharpness: Adjusts the edge definition of the picture.
Colour: Adjusts colour saturation of the picture.
Tint(G/R): Adjusts the colour tint of the picture.
Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode.
When you make changes to “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Colour” or “Tint(G/R)”, the OSD will be
adjusted accordingly.
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the “Tint” Function.
In PC mode, you can only make changes to “Backlight”, “Contrast” and “Brightness”.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be signicantly reduced if the level of brightness of the picture is reduced, and then this
will reduce the overall running cost.
Detailed Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed
picture settings.
“Detailed Settings” is available in “Standard” or “Movie” mode.
In PC mode, you can only make changes to “Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed
Settings” items.
Black adjust → Off / Low / Medium / High
You can select the black level on the screen to adjust the screen depth.
Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience
the most natural colour.
Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
Native: Native Colour Space offers deep and rich colour tone.
Custom: Adjusts the colour range to suit your preference.
Customizing the Colour Space
Colour → Red / Green / Blue / Yellow / Cyan / Magenta
Adjusts the Colour range to suit your preference. “Colour” is available when “Colour Space” is set to “Custom”.
Red / Green / Blue: In “Colour”, you can adjust the RGB values for the selected colour.
Reset: Resets the colour space to the default values.
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: Changing the adjustment value will refresh the adjusted screen.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
You can emphasize the pink ‘esh tone’ in the picture.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
xvYCC → Off / On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD
player).
“xvYCC” is available when the picture mode is set to “Movie”, and the external input is set to “HDMI” or “Component”
mode.
If “xvYCC” function is active, PIP cannot be selected.



N
N
N
N
N
N
❑
N
N




•
•
•
N
-
-
-
-

•
•

N


N
N
BN68-01737B-ENG.indb 16 2008-09-10 �� 10:38:57

English - 17
Picture Options
In PC mode, you can only make changes to the “Colour Tone” and “Size” from among the items in “Picture Options”.
Colour Tone → Cool2 / Cool1 / Normal / Warm1 / Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected “Picture” mode.
“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Size
You can select the picture size which best corresponds to your viewing requirements.
Press the TOOLS button to display “Tools” menu. You can also set the size by selecting “Tools → Picture Size”.
Auto Wide: Automatically adjusts the picture size to the “16:9” aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnies the 16:9 wide picture (in the vertical direction) to t the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p) or Component (1080i
/ 1080p) signals are input.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
“Wide Zoom”: Press the ► button to Select “Position”, then press the ENTER
E
button. Press the ▲ or ▼ button to
move the screen up / down. Then press the ENTER
E
button.
“Zoom”: Press the ► button to Select “Position”, then press the ENTER
E
button. Press the ▲ or ▼ button to move
the picture up and down. Then press the ENTER
E
button. Press the ► button to Select “Size”, then press the
ENTER
E
button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press
the ENTER
E
button.
After selecting “Just Scan” in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select “Position” by pressing
the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
E
button. You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3
When setting the picture size to “Auto Wide” in a 16:9 wide TV, you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function
is intended for users to select it.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
This function is available in “Auto Wide” mode.
This function is not available in “PC”, “Component” or “HDMI” mode.
Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any
static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
DNIe → Off / Demo / On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with
the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for
demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine) DNIe™
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and
white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™
technology will t every signal into your eyes.
This function is not available in “Movie” and “Standard” mode.
❑
N

N
N

T
•
•
•
•
•
•
N
N
N
N
N
N
N
N
N
N

•
•
•
•
N
N

N

N
N
BN68-01737B-ENG.indb 17 2008-09-10 �� 10:38:57

English - 18
HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
100Hz Motion Plus → Off / Low / Medium / High / Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
This function is not available in PC mode.
If you enable “100 Hz Motion Plus”, noise may appear on the screen. If this occurs, set “100Hz Motion Plus” to “off” or
select one of the other options.
Blue Only Mode → Off / On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and
green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video
equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred
values appropriate to the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar
Patterns, without using an additional Blue Filter.
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
Smart LED → Off / On / Demo
Controls LED backlight to maximize picture clarity. If you set the “Smart LED” to “Demo”, you can view the applied “Smart
LED” function and normal pictures on the screen.
PictureReset→ResetPictureMode/Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.

N

N
N

N

❑
N
Viewing Picture-in-Picture
You can display a sub picture within the main picture of set programme or video
input. In this way, you can watch the picture of set programme or video input from
any connected equipment while watching the main picture.
You may notice that the picture in the PIP window becomes slightly unnatural
when you use the main screen to view a game or karaoke.
Press the TOOLS button to display “Tools” menu. You can also congure PIP
related settings by selecting “Tools → PIP”.
PIP→On/Off
You can activate or deactivate the PIP function.
Main picture Sub picture
Component
HDMI 1, HDMI / DVI 2, HDMI 3, HDMI 4
PC
TV, Ext.1, Ext.2, AV
Source
You can select a source of the sub-picture.
Size → / /
You can select a size of the sub-picture.
If main picture is in “HDMI” mode, “Size” is available.
Position → / / /
You can select a position of the sub-picture.
In Double ( , ) mode, “Position” cannot be selected.
Channel
You can select a channel of the sub-picture only when the “Source” is set to “TV”.
N
T
❑


N

N

Setup
Entertainment : Off
Energy Saving : Off
PIP  ►
Software Upgrade
Common Interface
PIP
PIP : On
Source : TV
Size :
Position :
Channel : ATV 11
L Move E Enter R Return
BN68-01737B-ENG.indb 18 2008-09-10 �� 10:38:57