Samsung U*H75 SERIES User manual

User Manual
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entiretywithout the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
U*H75* U*H85*
•An administration fee may be charged if either
‒(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
‒(b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
•The amount of such administration charge will be advised to you before anywork orhome visit is carried out.

2
Table of contents
Before Using the Product
Securing the Installation Space 4
Precautions for storage 4
Safety Precautions 4
Symbols 4
Cleaning 5
Electricity and Safety 5
Installation 6
Operation 7
Preparations
Parts 10
Control Panel 10
Direct Key guide 11
Function Key Guide 12
Configuring Eye Saver Mode, Brightness and Contrast
from the Initial Screen 14
Changing the Volume setting 14
Reverse Side 15
Adjusting the Product Tilt and Height 16
Rotating the Monitor Screen (U32H850UM*) 16
Rotating the monitor (U32H850UM*) 17
Anti-theft Lock 17
Precautions for moving the monitor 18
MagicRotation Auto (U32H850UM*) 19
Installing a Wall-mount Kit or Desktop Stand
(U28H750UQ*) 20
Installing a Wall-mount Kit or Desktop Stand
(U32H850UM*) 21
Installation 22
Attaching the Stand (U28H750UQ*) 22
Attaching the Stand (U32H850UM*) 23
Removing the Stand (U28H750UQ*) 24
Removing the Stand (U32H850UM*) 25
Connecting and Using a Source Device
Read below before installing the monitor. 26
Connecting and Using a PC 26
Connection Using the HDMI Cable 26
Connection Using the HDMI-DVI Cable 27
Connection Using the DP Cable 27
Connection Using the MINI DP Cable
(U32H850UM*) 27
Connecting to Headphones 27
Connecting the Product to a PC as a USB HUB
(U32H850UM*) 28
Connecting a PC to the Product 28
Utilizing the Product as a USB HUB 28
Connecting the Power (U28H750UQ*) 29
Connecting the Power (U32H850UM*) 29
Tidying Up the Connected Cables (U28H750UQ*) 30
Tidying Up the Connected Cables (U32H850UM*)31
Correct posture to use the product 32
Driver Installation 32
Setting Optimum Resolution 32
Screen Setup
SAMSUNG MAGIC Bright 33
Black Equalizer 34
Brightness 34
Contrast 34
Sharpness 34
Color 35
SAMSUNG MAGIC Angle (U28H750UQ*) 35
HDMI Black Level 36
Eye Saver Mode 36
Game Mode 36
Response Time 36
Picture Size 37
Screen Adjustment 37
Configuring the PIP/PBP Settings
PIP/PBP Mode 38
Size 39
Position 39
Sound Source 39
Source 40

3
Table of contents
Picture Size 40
Contrast 41
Adjusting OSD (On Screen
Display) settings
Transparency 42
Language 42
Display Time 42
Setup and Reset
FreeSync 43
Eco Saving Plus 45
Off Timer Plus 45
USB Super Charging (U32H850UM*) 45
PC/AV Mode 46
DisplayPort Ver. 46
Source Detection 46
Key Repeat Time 46
Power LED On 46
Reset All 46
Information 47
Installing the Software
Easy Setting Box 48
Restrictions and Problems with the Installation 48
System Requirements 48
Troubleshooting Guide
Requirements Before Contacting Samsung Customer
Service Center 49
Testing the Product 49
Checking the Resolution and Frequency 49
Check the following. 49
Q & A 51
Specifications
General 52
Standard Signal Mode Table 53
Appendix
Responsibility forthe Pay Service (Cost to
Customers) 57
Not a product defect 57
A Product damage caused by customer's fault 57
Others 57

4
Securing the Installation Space
Ensure some space around the product forventilation. An internal temperature rise may cause fire and
damage the product. Be sure to allow the amount of space as shown below or greaterwhen installing
the product.
―The exterior may differdepending on the product.
10 cm (3.93 Inches)
10 cm (3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
10 cm (3.93 Inches)
10 cm (3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
―Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product
(Service fee will be charged.)
Do not press the monitor screen with hands or other objects. There is a risk of damaging the screen.
Safety Precautions
Caution RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of
this product.
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.
Symbols
Warning A serious or fatal injury may result if instructions are not followed.
Caution Personal injury or damage to properties may result if instructions are
not followed.
Before Using the Product
Chapter 01

5
Cleaning
―Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
―Take the following steps when cleaning.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
―Hold the powercable by the plug and do not touch the cable with wet hands. Otherwise, an electric
shock may result.
3
Wipe the monitorwith a clean, soft and dry cloth.
‒Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
‒Do not spraywater or detergent directly on the product.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5
Connect the powercord to the product when cleaning is finished.
6
Power on the product and computer.
Electricity and Safety
Warning
•Do not use a damaged powercord or plug, or a loose power socket.
•Do not use multiple products with a single power socket.
•Do not touch the power plug with wet hands.
•Insert the power plug all the way in so it is not loose.
•Connect the power plug to a grounded power socket (type1 insulated devices only).
•Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy
object.
•Do not place the power cord or product near heat sources.
•Clean any dust around the pins of the powerplug or the power socket with a dry cloth.
Caution
•Do not disconnect the power cord while the product is being used.
•Only use the power cord provided with your product by Samsung. Do not use the power cord with
other products.
•Keep the power socket where the power cord is connected unobstructed.
‒The power cord must be disconnected to cut off power to the product when an issue occurs.
•Hold the plug when disconnecting the power cord from the power socket.

6
Warning
•DO NOTPLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT
INSTALL THE PRODUCT NEAR HEAT SOURCES.
•Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•Install the product at least 10 cm away from the wall to allowventilation.
•Keep the plastic packaging out of the reach of children.
‒Children may suffocate.
•Do not install the product on an unstable orvibrating surface (insecure shelf, sloped surface, etc.)
‒The product may fall and become damaged and/or cause an injury.
‒Using the product in an area with excess vibration may damage the product or cause a fire.
•Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or
smoke.
•Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
‒The product lifespan may be reduced or a fire may result.
•Do not install the product within the reach of young children.
‒The product may fall and injure children.
•Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil
pollution. And do not install or use the product in the kitchen or near the kitchen stove.
Caution
•Do not drop the product while moving.
•Do not set down the product on its front.
•When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of
the product is not protruding.
‒The product may fall and become damaged and/or cause an injury.
‒Install the product only on cabinets or shelves of the right size.
•Set down the product gently.
‒Product failure or personal injury may result.
•Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical
substances, extreme temperatures or a significant presence of moisture, or a place where
the product will operate continuously for an extended period of time) may seriously affect its
performance.
‒Be sure to consult Samsung Customer Service Centerif you want to install the product at such a
place.
Installation

7
Warning
•There is a high voltage inside the product. Neverdisassemble, repair or modify the product
yourself.
‒Contact Samsung CustomerService Center for repairs.
•To move the product, first disconnect all the cables from it, including the power cable.
•If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord
immediately and contact Samsung Customer Service Center.
•Do not let children hang from the product or climb on top of it.
‒Children may become injured or seriously harmed.
•If the product is dropped or the outer case is damaged, turn off the power and disconnect the
power cord. Then contact Samsung Customer Service Center.
‒Continued use can result in a fire or electric shock.
•Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
‒The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a
serious injury.
•During a lightning or thunderstorm, power off the product and remove the power cable.
•Do not drop objects on the product or apply impact.
•Do not move the product by pulling the power cord or any cable.
•If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area
immediately.
•Do not lift or move the product by pulling the power cord or any cable.
•Do not use or keep combustible spray or an inflammable substance near the product.
•Ensure the vents are not blocked by tablecloths or curtains.
‒An increased internal temperature may cause a fire.
•Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent orinput/output ports, etc).
‒Be sure to power off the product and disconnect the power cord when water or otherforeign
substances have entered the product. Then contact Samsung Customer Service Center.
•Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the
product.
‒Be sure to power off the product and disconnect the power cord when water or otherforeign
substances have entered the product. Then contact Samsung Customer Service Center.
Operation

8
Caution
•Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
‒Activate power-saving mode ora moving-picture screen saverif you will not be using the
product for an extended period of time.
•Disconnect the powercord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc).
‒Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
•Use the product at the recommended resolution and frequency.
‒Your eyesight may deteriorate.
•Do not put AC/DC adapters together.
•Remove the plastic bag from the AC/DC adapter before you use it.
•Do not let water enter the AC/DC adapter device or get the device wet.
‒An electric shock or fire may result.
‒Avoid using the product outdoors where it can be exposed to rain or snow.
‒Be careful not to get the AC/DC adapterwet when you wash the floor.
•Do not put the AC/DC adapter near to any heating apparatus.
‒Otherwise, a fire may result.
•Keep the AC/DC adapter in a well-ventilated area.
•If you place the AC/DC poweradapter so that it is hanging with the cord input facing upwards,
water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
Make sure to rest the AC/DC power adapter flat on a table or the floor.
•Insert the power plug into the AC/DC adapteruntil a click sound is heard.
•Do not insert only the power plug into the poweroutlet.
•Do not use an AC/DC adapter otherthan the provided one.
‒It may cause electric shock or fire.
•Do not insert the AC/DC adapter into the poweroutlet on the ceiling.
‒It may cause electric shock or fire.
•Rotate the power plug not to exceed the range (0 to 90°) on the AC/DC adapter.
‒It may cause electric shock or fire.
•Never diassemble the power plug afterbeing assembled. (It cannot be separated afterassembly.)
•Never use the provided power plug for other devices.
•When removing the AC/DC adapter from the power outlet, hold the body of AC/DC adapterand pull
it up.
‒It may cause electric shock or fire.
•Do not drop any objects orapply shock on the AC/DC adapter.
‒It may cause electric shock or fire.
•Use the AC/DC adapter after removing its plastic cover.
‒Otherwise, this may result fire.

9
•Do not hold the product upside-down or move it by holding the stand.
‒The product may fall and become damaged or cause an injury.
•Looking at the screen too close for an extended period of time can deteriorate your eyesight.
•Do not use humidifiers or stoves around the product.
•Rest your eyes for more than 5 minutes or look at distance objects for every1 hour of product use.
•Do not touch the screen when the product has been turned on foran extended period of time as it
will become hot.
•Store small accessories out of the reach of children.
•Exercise caution when adjusting the product angle or stand height.
‒Yourhand or finger may get stuck and injured.
‒Tilting the product at an excessive angle may cause the product to fall and an injury may result.
•Do not place heavy objects on the product.
‒Product failure or personal injury may result.
•When using headphones or earphones, do not turn the volume too high.
‒Having the sound too loud may damage your hearing.

10
Preparations
Chapter 02
Parts
Control Panel
―The color and shape of parts may differfrom what is shown. Specifications are subject to change without
notice to improve quality.
Function Key Guide
JOG Button
DOWN
PRESS(ENTER)
LEFT
Return
Power LED
UP
RIGHT
Icons Description
JOG Button
Multi directional button that helps navigate.
―The JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.
Power LED
This LED is power status indicator and works as
•Power On (Power button): Off
•Power saving mode: Blinking
•Power Off (Power button): On
―The power Indicator operation can be swapped by changing in the
menu. (System → Power LED On) Actual models because of functional
variation maybe haven’t this function.
Function Key Guide
Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.
―Function Key Guide mayvary depending on the function or product
model. Please refer to the actual product.

11
Eye Saver Mode
Volume
Features
Eye Saver Mode Off
•UP/DOWN: Adjust Brightness, Contrast, Eye Saver Mode.
•LEFT/RIGHT: Adjust Volume.
•PRESS(ENTER): Display Function Key Guide.
Direct Key guide
―The shortcut button screen (OSD menu) shown below is displayed onlywhen the monitor screen is turned on, the computer resolution changes, or the input source changes.

12
Function Key Guide
―To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.
Return
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appearwhen the focus changes.
PRESS(ENTER): The selected item will be applied.
Icons Description
Selects to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has
been changed.
Selects by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT button for10 seconds when the main menu displayed.
―If the OSD control is locked, Brightness and Contrast can be adjusted. PIP/PBP is available.
Eye Saver Mode is available. Information can be viewed.
Selects by moving the JOG button in the function key guide screen.
Press the button when configuring settings for the PIP/PBP function is required.
Selects to turn the Monitor off by moving the JOG button in the function key guide screen.
―Actual models because of functional variation, Function key guide options will be different.

13
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.
JOG Button Power saving/Non-signal mode
UP Source Change
Down
PRESS(ENTER) for 2 seconds
Power Off
When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button Action
UP/DOWN Move the option
LEFT
Exit the Main menu.
Close Sublist without saving value.
Value decreases in the slider.
RIGHT
Move to next depth.
Value increases in the slider.
PRESS(ENTER)
Move to next depth.
Save the value and close Sublist.

14
Configuring Eye Saver Mode, Brightness and Contrast
from the Initial Screen
Adjust the Brightness, Contrast and Eye Saver Mode by moving the JOG button.
Eye Saver Mode
Brightness
Contrast
Off
―The displayed image may differ depending on the model.
Eye Saver Mode
―Not available when PIP/PBP Mode is set to On.
Brightness
―This menu is not available when
SAMSUNG
MAGIC
Bright is set to Dynamic Contrast mode.
―This menu is not available when Eco Saving Plus is enabled.
―This menu is not available when Eye Saver Mode is enabled.
Contrast
―This menu is not available when
SAMSUNG
MAGIC
Bright is in Cinema or Dynamic Contrast mode.
―This menu is not available when Game Mode is enabled.
―This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode).
Changing the Volume setting
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
Volume 50
Mute
―The displayed image may differ depending on the model.
―If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute
the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the
input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on
the product.
―What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise orwhen the input
signal is weak, usually due to a problem with the volume of an input device.
―To activate the Mute function, access the Volume control screen, then use the JOG button to move the
focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease
the Volume.

15
Port Description
POWER IN
Connect the powercord foryour monitor to the POWER IN port on
the back of the product.
―(U32H850UM* model only)
12
4
3
Connect to a USB device.
―Super charging is possible using the
1
and
2
ports only.
These ports charge devices faster than typical USB ports. The speed
depends on the connected devices.
―(U32H850UM* model only)
(PC IN)
Connects to a PC using a USB cable. Compatible with a USB cable
version 3.0 or lower.
―This port can only connect to a PC.
―(U32H850UM* model only)
Reverse Side
―The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual
product.
Port Description
HDMI IN 1 HDMI IN 2
Connects to a source device using an HDMI cable or HDMI-DVI
cable.
―HDMI1 support 3840 x 2160 @ 30 Hz
―HDMI2 support 3840 x 2160 @ 60 Hz
DP IN
Connects to a PC using a DP cable.
Connect to an audio output device such as headphones.
―The sound could only be heard when using the HDMI to HDMI cable
or DP cable.
MINI DP IN
Connects to a PC using a MINI DP cable.
―(U32H850UM* model only)
DC 19V
Connects to the AC/DC adapter.
―(U28H750UQ* model only)

16
Adjusting the Product Tilt and Height
―The color and shape of parts may differfrom what is shown. Specifications are subject to change without
notice to improve quality.
U28H750UQ*
-1.0° (-2.0°, +1.0°) ~ 20.0° (±2.0°)
U32H850UM*
-5.0° (±2.0°) ~ 24.0° (±2.0°)
-30.0° (±2.0°) ~ 30.0° (±2.0°) 0 ~ 135.0 mm (±5.0 mm)
•The monitor tilt and height can be adjusted.
•Hold the lower part of the product and adjust the tilt carefully.
•When adjusting the stand height, you may hear a noise. This noise is generated because the ball
inside the stand slides when the stand height is adjusted. It is a normal noise and not a product
malfunction.
Rotating the Monitor Screen (U32H850UM*)
―You can rotate yourmonitor as shown below.
―The color and shape of parts may differfrom what is shown. Specifications are subject to change without
notice to improve quality.
1 2 3
4 5 6
•Adjust the screen following the arrow direction.
•Rotate the screen in clockwise direction till it becomes completely vertical to the desktop.
•The monitor may get damaged if you rotate the screen without tilt, orcounter clockwise direction.

17
Rotating the monitor (U32H850UM*)
When rotating the monitor, the rotation angle is displayed on the monitorscreen.
The on-screen display (OSD) menu items will automatically rotate when the screen rotates.
Caution
1
If the MagicRotation Auto software is not installed on the monitor, screen content will not
automatically rotate. The OSD can still rotate by 90° and display properly.
2
Once rotated, the OSD may appear in a different view mode from the mode before it was rotated.
Anti-theft Lock
―An anti-theft lock allows you to use the product securely even in public places.
―The locking device shape and locking method depend on the manufacturer. Referto the user guide
provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
U28H750UQ* U32H850UM*
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
‒An anti-theft locking device can be purchased separately.
‒Referto the user guide provided with your anti-theft locking device for details.
‒Anti-theft locking devices can be purchased at electronics retailers or online.

18
Precautions for moving the monitor
•Do not directly apply pressure on the screen.
•Do not hold the screen when moving the
monitor.
•Do not hold the product upside down only by
the stand.
•Hold the lower corners or edges of the
monitorwhen moving it.
•

19
MagicRotation Auto (U32H850UM*)
The MagicRotation Auto function detects the rotation of monitors that are fitted with a rotation sensorand rotates the Windows screen accordingly.
Software Installation
1
Insert the user manual CD provided with the product into the CD-ROM drive.
2
Follow the instructions given on the screen to proceed with installation.
―After installation, the application menu language will be displayed in the language of the operating system. (This complies with the basic policies of Windows.)
Caution
1
Compatible only with Windows 7 (32 bit or 64 bit), Windows 8 (32 bit or 64 bit), Windows 8.1 (32 bit or 64 bit) and Windows 10 (32 bit or 64 bit).
2
Compatible with graphics cards that comply with the DDC/CI and MS API standards. The MagicRotation Auto function may not be available for graphics cards that do not complywith the aforementioned
standards.
3
To maximize the performance of the function, update the graphics card driverto the latest version.
4
Fourteen languages are available as installation languages.
5
If the orientation is set to a mode otherthan "Landscape" in the screen resolution menu on Windows OS, the MagicRotation Auto function may not work properly.
6
The OSD menu will be displayed if the monitor is rotated. When the monitor is rotated, the screen reconfiguration process may be displayed or screen burn-in may appear, depending on the graphics card. This
is performed by the Windows operating system and has nothing to do with the product.
7
If you do not want the screen to rotate automatically when the monitor is rotated, press the Windows and L keys at the same time to lock the Windows operating system. This is a limitation of the Windows API.

20
Installing a Wall-mount Kit or Desktop Stand
(U28H750UQ*)
―Powerthe product off and remove the power cable from the power socket.
1 2
43
A
Attach the wall-mount kit or desktop stand here
B
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
•Notes
‒Using a screw longer than the standard length can damage the internal components of the
product.
‒The length of screws required fora wall mount that does not comply with the VESA standards
may vary depending on the specifications.
‒Do not use screws that do not complywith the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper
screws orattaching the wall-mount kit or desktop stand using excessive force.
‒Samsung shall not be held liable forany product damage orpersonal injury caused by using a
wall-mount kit otherthan the one specified or from an attempt to install the wall-mount kit on
your own.
‒To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10
cm or farther away from the wall.
‒Be sure to use a wall-mount kit that complies with the standards.
‒To install the monitor using a wall mount, disconnect the stand base from the monitor.
Unit: mm (inches)
Model name VESA screw hole specs (A * B)
in millimeters
Standard Screw Quantity
U28H750UQ* 100.0 x100.0 (3.9 x 3.9) 4.0 mm Φ, 0.7 pitch * 10.0 mm
long 4 EA
―Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.