Samsung VH55R-R User manual

User Manual
©Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
VH55R-R VH55T-E
VM46T-U VM55T-U VM55T-E
The colour and the appearance may differ depending on the product, and the content
in the manual is subject to change without prior notice to improve the performance.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect
(i.e., where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of contents
Before Using the Product
Safety Precautions 5
Safety symbols 5
Electricity and Safety 6
Installation 7
Operation 9
Precautions when handling the panel 11
Cleaning 12
Storage and Maintenance 12
Preparations
Checking the Components 13
Components 13
Parts 14
Reverse Side 14
Remote Control 15
Connection Using an IR Stereo Cable (sold
separately) 17
Before Installing the Product (Installation
Guide) 18
Switching between portrait and landscape 18
Ventilation 18
Installing the Wall Mount 19
Preparing before installing Wall-Mount 19
Installing the Wall Mount 19
Wall Mount Kit Specifications (VESA) 20
Connecting and Using
a Source Device
Before Connecting 21
Pre-connection Checkpoints 21
Connecting to a PC 21
Connection using a DVI cable (Digital type) 21
Connection Using an HDMI-DVI Cable 22
Connection Using an HDMI Cable 22
Connection Using an DP Cable 23
Connecting to a Video Device 24
Connection Using an HDMI-DVI Cable 24
Connection Using an HDMI Cable 25
Connecting to an Audio System 25
Connecting the LAN Cable 26
Changing the Input source 27
Source 27
Multiple Display Control
Cable Connection 28
RS232C Cable 28
LAN Cable 29
Connection 31
Control Codes 32
Using MDC 39
MDC Programme
Installation/Uninstallation 39
Home feature
Video Wall 40
Video Wall 40
Horizontal x Vertical 40
Screen Position 41
Format 41
On/Off Timer 42
On Timer 42
Off Timer 42
Holiday Management 43
2

Table of contents
Network Settings 44
ID Settings 45
Device ID 45
Device ID Auto Set 45
PC Connection Cable 45
More settings 46
Screen Adjustment
Backlight / Brightness / Contrast /
Sharpness / Picture Enhancer / Colour /
Tint (G/R) 47
Colour Temperature 47
White Balance Settings 48
Uniformity 48
Gamma 48
Black Equalizer 48
Picture Options 49
Color Tone 49
HDMI Black Level 49
Input Signal Plus 49
Apply Picture Settings 49
Picture Size 49
Picture Size 49
Picture Off 50
Reset Picture 50
OnScreen Display
Display Orientation 51
Onscreen Menu Orientation 51
Source Content Orientation 51
Aspect Ratio 51
Screen Protection 52
Pixel Shift 52
Timer 52
Immediate display 52
Side Grey 52
Message Display 53
Source Info 53
No Signal Message 53
MDC Message 53
Menu Language 53
Reset OnScreen Display 53
System
Setup 54
Time 55
Clock Set 55
DST 55
Sleep Timer 55
Power On Delay 55
Auto Source Switching 56
Auto Source Switching 56
Primary Source Recovery 56
Primary Source 56
Secondary Source 56
Power Control 56
Auto Power On 56
Standby Control 57
Network Standby 57
Power Button 57
Eco Solution 57
Energy Saving 57
Screen Lamp Schedule 57
No Signal Power Off 58
Auto Power Off 58
3

Table of contents
Temperature Control 58
Change PIN 58
General 59
Security 59
HDMI Hot Plug 59
Frame Alignment 59
Reset System 59
Sound Adjustment
HDMI Sound 60
Sound on Video Call 60
Reset Sound 60
Support
Software Update 61
Contact Samsung 61
Go to Home 62
Video Wall 62
On/Off Timer 62
Network Settings 62
ID Settings 62
More settings 62
Reset All 62
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Centre 63
Testing the Product 63
Checking the Resolution and Frequency 63
Check the followings. 64
Specifications
General 71
Preset Timing Modes 73
Appendix
Responsibility for the Pay Service (Cost to
Customers) 74
Not a product defect 74
A Product damage caused by customer's
fault 74
Others 74
Prevention of Afterimage Burn-in 75
What is afterimage burn-in? 75
Recommended prevention practices 75
Licence 76
4

5
Before Using the Product
Chapter 01
Safety Precautions
The following safety instructions are to ensure your personal safety and prevent property
damage. Please read the following to ensure the proper use of the product.
Safety symbols
Symbol Name Meaning
Warning A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions
are not followed.
Prohibition Do NOT attempt.
Instruction Follow directions.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part of this
product.
AC voltage: Rated voltage marked
with this symbol is AC voltage.
This symbol indicates that this
product has included important
literature concerning operation and
maintenance.
DC voltage: Rated voltage marked
with this symbol is DC voltage.
Class II product: This symbol
indicates that a safety connection
to electrical earth (ground) is not
required. If this symbol is not present
on a product with a mains lead,
the product MUST have a reliable
connection to protective earth
(ground).
Caution. Consult instructions for use:
This symbol instructs the user to
consult the user manual for further
safety related information.

6
Electricity and Safety
―The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Warning
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Do not bend or pull the power cable with force. Be careful not to leave
the power cable under a heavy object.
Product failure, an electric shock or fire may result from a damaged
cable.
Do not connect multiple products to a single power socket.
Overheated power sockets may cause a fire.
Insert the power plug all the way in so it is not loose.
An unsecure connection may cause a fire.
Clean any dust around the pins of the powerplug or the power socket with a dry cloth.
A fire may result.
Connect the power plug to a grounded power socket. (Except for devices that do not
provide grounding)
An electric shock or injury may result.
Do not use a damaged power plug or a loose power socket.
An electric shock or fire may result.

7
Caution
Hold the plug when disconnecting the power cable from the power
socket.
An electric shock or fire may result.
When connecting the power plug to the port, be sure to connect it
completely.
If the power plug is not completely connected to the port, the plug
may be unexpectedly disconnected, or there is a risk of overheating
due to overcurrent, leading to safety accidents.
Only use the power cable provided with yourproduct by Samsung. Do not use the power
cable with other products.
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
When a problem occurs with the product, the power cord must be unplugged to
completely cut off power to the product. Note that the product is not completely
powered down by using only the power button on the remote.
Do not disconnect the power cable while the product is being used.
The product may become damaged by an electric shock.
Installation
Warning
Before moving the product, turn off the powerswitch and disconnect
the powercable and all otherconnected cables.
Damage to the cable may cause a fire or electric shock.
When installing the product, keep it at a distance from the wall so that it
is well ventilated.
An increased internal temperature may cause a fire.
Do not install the product in a poorly ventilated space such as bookcase
or closet.
An increased internal temperature may cause a fire.
Keep the plastic packaging out of the reach of children.
Children's misuse of the plastic packaging may cause suffocation.
Do not install the power cable (DC powersupply) and the product near
heat sources.
(Candles, mosquito repellents, cigarettes, sprays, heating devices,
places exposed to direct sunlight, and more)

8
When installing the product, x it rmly so that it does not fall.
If the product is not fixed firmly and a child touches the product while
playing, the product may fall, causing damage to the product or injury
to the child.
Do not install the product in a kitchen or near a kitchen counter.
Edible oil or oil vapor can damage or deform the product.
Have a technician install the wall-mount hanger.
Installation by an unqualified person can result in an injury. Only use approved
cabinets.
If the product is installed in an unusual location, the surrounding environment may cause
a serious quality problem. Therefore, be sure to contact Samsung Customer Service
Centre before installation.
(Places where many fine dusts are generated, places where chemicals are used,
places with too high or low temperatures, places with a lot of moisture or water,
transportation equipment such as vehicles, airports and stations used continuously
for a long time, and more)
Caution
When lifting and moving the product, do not touch the screen display,
and make sure that at least two people work together.
The product may fall, causing personal injury or product damage.
Do not lay down the product on its front.
The screen may become damaged.
Prolonged exposure to direct sunlight may discolour the surface of the screen display.

9
Operation
Warning
If the product generates a strange noise, a burning smell, or smoke,
unplug the powerplug immediately and contact your Samsung
Customer Service Centre.
An electric shock or fire may result.
Keep the remote control batteries and the small accessories out of the
reach of children. Ensure children do not swallow any of them.
If children have had the battery in their mouths, consult your doctor
immediately.
If the product is dropped or its appearance is damaged, turn off the
powerswitch and disconnect the power cord. Then contact Samsung
Customer Service Centre.
Continued use can result in an electric shock or a fire.
Do not move the product by pulling the powercord orany cable.
Product failure, an electric shock or fire may result from a damaged
cable.
Ensure the vents are not blocked by tablecloths orcurtains.
An increased internal temperature may cause a fire.
Do not apply an impact to the product.
•The screen display may be damaged.
•An electric shock or fire may result.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or
input/output ports, etc).
•If foreign substances enter the product, be sure to power off the
product and disconnect the power cord. Then contact Samsung
Customer Service Centre.
•Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or
metallic objects on top of the product.
•If foreign substances such as water enter the product, be sure
to disconnect the power cord. Then contact Samsung Customer
Service Centre.
•Product failure, an electric shock or fire may result.
During a lightning or thunderstorm, power off the product and
disconnect the power cord.
An electric shock or fire may result.
Do not leave heavy objects oritems that children like (toys, sweets, etc.)
on top of the product.
The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.

10
Do not hang on or climb on the product.
•The product may fall, causing personal injury or even death.
•Be especially careful that children do not hang on or climb on
the product.
While the power plug is plugged into a powersocket, do not insert a
chopstick or other conductor into a remaining power socket. Also, after
disconnecting the power plug from the power socket, do not touch the
pins of the plug immediately.
Otherwise, an electric shock may result.
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
•Contact Samsung Customer Service Centre for repairs.
•An electric shock or fire may result.
If a gas leakage is found, do not touch the product or the power plug, and ventilate the
room immediately.
Sparks can cause an explosion or fire.
Do not use humidiers or stoves around the product.
An electric shock or fire may result.
Caution
Insert each battery so that its polarity (+, –) is correct.
If the polarity is not correct, the battery may rupture or the
internal fluid may leak, causing contamination and damage to the
surroundings, fire, or personal injury.
Do not place heavy objects on the product.
Product failure or personal injury may result.
When you do not use the product for a long time due to vacation or other reason,
disconnect the power cord from the power socket.
Dust accumulation combined with heat can cause a fire, electric shock or electric
leakage.
Use the product at the recommended resolution and frequency.
Your eyesight may deteriorate.
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned
forrecycling purposes. The customer is responsible for returning the used or rechargeable
batteries for recycling.
The customer can return used or rechargeable batteries to a nearby public recycling
centre or to a store selling the same type of the battery or rechargeable battery.
Rest your eyes for more than 5 minutes for every1 hour of product use.
Eye fatigue will be relieved.

11
Leaving the screen xed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
When you do not use the product for a long time, activate power-saving mode or set
the screen saver to moving-picture mode.
Do not use or keep combustible spray or an inammable substance near the product.
An explosion or fire may result.
Use only the specied standardised batteries, and do not use a new battery and a used
battery at the same time.
Otherwise, the batteries may be damaged or cause fire, personal injury or damage due
to a leakage of the internal liquid.
Do not watch the product screen too closely and continuously for a long time.
Your eyesight may deteriorate.
Do not lift or move the product when it is in operation.
Do not touch the screen when the product has been turned on for an extended period of
time as it will become hot.
When using headphones or earphones, do not turn the volume too high or use them fora
long time.
Damage to your hearing may result.
Precautions when handling the panel
Do not stand the product as shown in the image. The panel is fragile
and can get damaged.
Lay the product down to handle it as shown in the image. (the
packaging can be used).
Ensure you use the handles on the back when moving the product.
15 mm
Do not hold or grasp any area of the product within 15 mm from the
front.

12
Cleaning
Warning
Do not spray wateror cleanerdirectly on the product.
•The product’s surface may be damaged, or the markings may
be erased.
•An electric shock or fire may result.
Caution
When cleaning, be sure to disconnect the power plug and wipe gently with a soft and dry
cloth such as superne bers or cotton annels to prevent scratches.
The product's surface may be damaged, or the markings may be erased.
Be sure to use a soft and dry cloth such as superne bers or cotton annels because the
surface of the product and the screen display are vulnerable to scratches.
The product's surface or the screen display can be easily scratched with foreign
substances.
Do not apply chemicals containing alcohol, solvent, orsurfactant such as wax, benzene,
thinner, pesticide, air freshener, lubricant, orcleaner to the product.
The product's exterior may be discoloured or cracked, the surface of the panel may be
peeled off, or the markings may be erased.
Storage and Maintenance
Cleaning the exterior and display
Wipe the surface with a slightly wet, soft cloth, and then wipe with a dry cloth.
1 2 3
Precautions
Do not scratch the screen
with nails or sharp objects.
Scratches may leave marks or
damage the product.
Do not spray water directly
on any part of the product.
Product failure, an electric
shock or fire may result from
water that enters the product.
Due to the characteristics of
high-glossy products, using
a UV humidifier nearby may
create white-coloured stains
on the product.
•Removing a sticker attached on the screen may leave residues. Clean the residues before
watching the screen.
•Do not strongly press and rub the product. Damage to the product may result.
•Do not wipe the screen with chemicals. Product failure may result.
•Contact Samsung Customer Service Centre if the inside of the product needs cleaning
(service fee will be charged).

13
– Contact the vendor where you
purchased the product if any
components are missing.
– The appearance of the components
may differfrom the images shown.
– A stand is not provided with the
product. To install a stand, you can
purchase one separately.
– The RS232C adapter can be used to
connect to another monitor using the
D-SUB (9-pin) type RS232C cable.
Checking the Components
Components
―Components may differ in different locations.
Quick Setup Guide Warranty card
(Not available in some locations) Regulatory guide Power cord
Batteries (AAA x 2)
(Not available in some locations) Remote Control DP cable RS232C adapter
Wall Mount Adapter x4/ Screw
x 4
External IR cable
(Not available in some locations)
Preparations
Chapter 02

14
Parts
Reverse Side
―The colour and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
Port Description
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
IR IN
Supplies power to the external sensor board or receives the light sensor signal.
DVI IN
Connects to a source device using a DVI cable or HDMI-DVI cable.
HDMI IN 1, HDMI IN 2
Connects to a source device using an HDMI cable.
DP IN
Connects to a PC using a DP cable.
AUDIO OUT
Outputs sound to an audio device via an audio cable.
AUDIO IN
Receives sound from a source device via an audio cable.
RS232C OUT
Connects to multiple products using a serial cable.
―The serial cable is not provided with the product. Contact yourvendor for
purchase.
RS232C IN
Connects to MDC using an RS232C adapter.
DP OUT (LOOPOUT)
Connects to another product using a DP cable.
―When connecting monitors through DP Loopout, using the DP cable that came
with the package is recommended.
―This port uses an algorithm that is specific to UHD resolution input and
output. The port is not compatible with monitors that have FHD content-
specific DP Loopout ports. Connecting Loopout ports between monitors of
the same model is recommended.
SERVICE
Dedicated to service technicians.
RJ45
Connects to MDC using a LAN cable. (10/100 Mbps)

15
– Remote control button functions
may differ for different products.
Remote Control
―Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
―A button without a description in the image below is not supported on the product.
Power off the product.
Number buttons
Use to enter a PIN, enter a Date, etc.
Power on the product.
Display or hide the onscreen display.
Adjust the volume.
Change the input source.
Mute the sound.
•Unmuting the sound: Press MUTE again
or press the volume control(+ VOL -)
button.
A shortcut button to Home screen (Go to
Home).

16
Move to the upper, lower, left or right menu,
or adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Select from the connected external devices.
Display information about the current input
source.
Return to the previous menu.
Quickly select frequently used functions.
It sets safe lock function.
Press the SET button and enter a device ID
using numeric buttons. Control the product
using the remote control.
Cancel a value that has been set using the SET
button and control all connected products
using the remote control.
– Remote control button functions
may differ for different products.
To place batteries in the remote control (AAA x 2)

17
Connection Using an IR Stereo Cable (sold
separately)
Make sure to connect the External IR cable while the product is powered
off. Then, power on the product.
Controlling more than one display product using
your remote control
•Connect the IR OUT port on the product to the IR IN port on the other
display product using the dedicated stereo cable.
•A command sent from the remote control pointed at product
1
will
be received by both display products
1
and
2
.
―The appearance may differ depending on the product.
1 2
IR OUT
IR IN
Controlling more than one display product using an
External IR cable
•A command sent from the remote control pointed at product
1
(to
which the External IR cable is connected) will be received by both
display products
1
and
2
.
―The appearance may differ depending on the product.
―The external IR cable can be placed on the side of the product as long as
the cable length permits.
1 2
IR OUT
IR IN
IR IN

18
Before Installing the Product (Installation
Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
•Ensure that an authorised installation company installs the wall mount.
•Otherwise, it may fall and cause personal injury.
•Make sure to install the specified wall mount.
Switching between portrait and landscape
―Contact Samsung Customer Service Centre for further details.
•To use the product in portrait orientation, rotate it clockwise.
―Do not use this model installed on a ceiling, floor, or table.
Ventilation
―Contact Samsung Customer Service Centre for further details.
Installation on a PerpendicularWall
AMinimum 40 mm
BAmbient temperature: Under 35℃
•When installing the product on a perpendicularwall, allow at
least 40 mm of space between the product and wall surface for
ventilation and ensure that the ambient temperature is kept below
35℃. A
B
Installation on an Indented Wall
Plane view
AMinimum 40 mm
BMinimum 70 mm
CMinimum 50 mm
DMinimum 50 mm
EAmbient temperature: Under 35℃
―When installing the product on an indented wall,
allow at least the space specified above between
the product and wall forventilation and ensure
that the ambient temperature is kept below 35℃.
B
D
C
D
B
C
E
A

19
Installing the Wall Mount
1
Preparing before installing Wall-Mount
Use the Wall Mount Adapter (
1
) to install the wall mount.
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung is not responsible for any damage to the product or injury to yourself or others if you select to install the
wall mount on your own.
In order to respond to ADA compliance, it is necessary to use a wall mount that is compatible with our products
and satisfies a thickness of 30 mm or less.
ex) RXT's ** product
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AS TO THE PERFORMANCE OF ANY THIRD PARTY
PRODUCTS, INCLUDING BUT NOT LIMITED TO WALL MOUNTS.
SAMSUNG EXPRESSLY DISCLAIMS ANY REPRESENTATION OR WARRANTY, TO PURCHASER OR ANY OTHER
PERSON, WITH RESPECT TO THIRD PARTY PRODUCTS, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANITES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

20
Wall Mount Kit Specications (VESA)
―Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please
contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in
severe personal injury.
•Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are
provided.
•Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•Forwall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
•Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
•Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
•Always have two people mount the product on a wall.
•Standard dimensions forwall mount kits are shown in the table below.
Unit: mm
VESA screw hole specs (A * B) in millimetres Standard Screw Quantity
600 x 400 M8 4
―Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric
shock.