Samsung HW-LST70T User manual

USER MANUAL
HW-LST70T
You can access the FULL MANUAL on Samsung’s on-line customer support
centre by scanning the QR code. To see the manual on your PC or mobile
device, download the manual in document format from Samsung’s website.
(http://www.samsung.com/support)

ENG - 2
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Refer to the table below for an explanation of
symbols which may be on your Samsung product.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that high voltage
is present inside. It is dangerous to
make any kind of contact with any
internal part of this product.
This symbol indicates that this product
has included important literature
concerning operation and maintenance.
Class II product : This symbol indicates
that it does not require a safety
connection to electrical earth (ground).
If this symbol is not present on a
product with a power cord, the product
MUST have a reliable connection to
protective earth (ground).
AC voltage : This symbol indicates that
the rated voltage marked with the
symbol is AC voltage.
DC voltage : This symbol indicates that
the rated voltage marked with the
symbol is DC voltage.
Caution, Consult instructions for use :
This symbol instructs the user to
consult the user manual for further
safety related information.
CAUTION
•TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
•This apparatus shall always be connected to a
AC outlet with a protective grounding
connection.
•To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
•To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.

ENG - 3
PRECAUTIONS
1. Ensure that the AC power supply in your
house complies with the power
requirements listed on the identication
sticker located on the bottom of your
product. Install your product horizontally, on
a suitable base (furniture), with enough
space around it for ventilation (7~10 cm).
Make sure the ventilation slots are not
covered. Do not place the unit on ampliers
or other equipment which may become hot.
This unit is designed for continuous use. To
fully turn off the unit, disconnect the AC plug
from the wall outlet. Unplug the unit if you
intend to leave it unused for a long period of
time.
2. During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due
to lightning could damage the unit.
3. Do not expose the unit to other heat sources.
This could lead to overheating and cause the
unit to malfunction.
4. Protect the product from excess heat (e.g. a
replace) or equipment creating strong
magnetic or electric elds. Unplug the power
cable from the AC wall socket if the unit
malfunctions. Your product is not intended
for industrial use. It is for personal use only.
Condensation may occur if your product has
been stored in cold temperatures. If
transporting the unit during the winter, wait
approximately 2 hours until the unit has
reached room temperature before using.
5. The battery used with this product contains
chemicals that are harmful to the
environment. Do not dispose of the battery
in the general household trash. Do not
expose the battery to excess heat or re.
Do not short circuit, disassemble, or overheat
the battery.
CAUTION : Danger of explosion if the battery
is replaced incorrectly. Replace only with the
same or equivalent type.

ENG - 4
DURABILITY
•The Soundbar provides the robust durability by IP55 so that it can be used in outdoor environment
(when installed and used as per the instructions in this User Manual).
•The remote control of this product provides durability by IP56.
Protection against solids
IP
Protection against water
5 5
No protection 0 0 No protection
Solids > 50 mm 1 1 Vertically falling water
Solids > 12 mm 2 2 Vertically water - enclosure tilted 15°
Solids > 2.5 mm 3 3 Sprayed water 60° from vertical
Solids > 1.0 mm 4 4 Splashed water from all directions
Dust Protected 5 5 Hosing jets from all directions
Dust tight 6 6 Strong hosing jets from all directions
- 7 Temporary Immersion: 1 m for 30 minutes
- 8 Immersion: manufacturer dened depth and time
Despite the IP55 and IP56 ratings, your Soundbar and remote control are not impervious to water damage
in any situation. To help prevent damage to your products, avoid the products being subjected to:
•Water projected by a source greater than 6.3 mm against enclosure from any direction or
submersion in water.
•Water projected at greater than 30 kPa (4.4 psi) with a water volume greater than 12.5 litres/minute
for more than 3 minutes and extreme weather conditions.

ENG - 5
CONTENTS
01 Checking the Components 6
02 Product Overview 8
03 Using the Remote Control 9
04 Connecting the Soundbar 10
05 Installing the Wall Mount 11
06 Using a wired connection to the TV 16
07 Using a wireless connection to the TV 18
08 Connecting an External Device 21
09 Connecting a Mobile Device 22
10 Software Update 25
11 Troubleshooting 26
12 Licence 27
13 Open Source Licence Notice 27
14 Important Notes About Service 27
15 SpecicationsandGuide 28

ENG - 6
01 CHECKING THE COMPONENTS
Soundbar Main Unit Soundbar Remote Control /
Batteries
Optical Cable
x 2
AC/DC Adapter Wall Mount Guide Holder-Screw
x 2
x 2 x 2 x 2
Bracket-Top Bracket-Bottom Bracket-Guide Bracket-Wall Mount
x 4
(M3 x L10)
x 2
(M4 x L10)
x 2
(M6 x L10) x 2 x 2
(M5 x L50)
x 2
Screw-Taptype Screw-Machine Bolt-Etc A/S Bolt-Etc Anchor / Screw
•For more information about the power supply and power consumption, refer to the label attached
to the product. (Label: Bottom of the Soundbar Main Unit)
•To purchase additional components or optional cables, contact a Samsung Service Centre or
Samsung Customer Care.
•For Soundbar wall mounting components, see pages 11~15.
•This Soundbar is intended only for TV mount or wall mount.
•Design, specications, and App screen are subject to change without prior notice.

ENG - 7
01 CHECKING THE COMPONENTS
Soundbar Main Unit Soundbar Remote Control /
Batteries
Optical Cable
x 2
AC/DC Adapter Wall Mount Guide Holder-Screw
x 2
x 2 x 2 x 2
Bracket-Top Bracket-Bottom Bracket-Guide Bracket-Wall Mount
x 4
(M3 x L10)
x 2
(M4 x L10)
x 2
(M6 x L10) x 2 x 2
(M5 x L50)
x 2
Screw-Taptype Screw-Machine Bolt-Etc A/S Bolt-Etc Anchor / Screw
•For more information about the power supply and power consumption, refer to the label attached
to the product. (Label: Bottom of the Soundbar Main Unit)
•To purchase additional components or optional cables, contact a Samsung Service Centre or
Samsung Customer Care.
•For Soundbar wall mounting components, see pages 11~15.
•This Soundbar is intended only for TV mount or wall mount.
•Design, specications, and App screen are subject to change without prior notice.
Inserting Batteries before using the Remote Control
(AAA batteries X 2)
1
1
3
232
1. Press the ^ button at the top rear of the Soundbar remote control. The body will pop out slightly
from the body cover.
2. Turn the remote over, push the body of the remote upwards until the battery compartment is
revealed, and then remove the battery cover.
3. If there are batteries in the remote, remove the existing batteries.
4. Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the
batteries’ polarities (+, -) are oriented correctly.
5. Once the batteries have been inserted, attach the battery cover and then slide down the body of
the remote.
6. Turn the remote over, press and hold the ^ button on the top rear, and then slide the body of the
remote down into place.
•Alkaline batteries are recommended for longer battery life.

ENG - 8
02 PRODUCT OVERVIEW
Front Panel / Bottom Panel of the Soundbar
Display
Power Source
Volume
Bottom Panel
Position the product so that the SAMSUNG logo is located on the top.
Rear Panel of the Soundbar
SERVICE
DC23V
DIGITAL
AUDIOIN
(OPTICAL)
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
󱂓
󱂔
󱂕
󱂓DIGITAL AUDIO IN (OPTICAL)
Connect to the digital (optical) output of an external device.
󱂔SERVICE
Connect a USB storage device to upgrade the product's software.
󱂕DC 23V
Connect the AC/DC power adapter. (Power Supply In)

ENG - 9
03 USING THE REMOTE CONTROL
How to Use the Remote Control
󱂓
󱂕
󱂔
󱂖
󱂘
󱂙
󱂗
󱂚
󱂜
󱂛
󱂝
󱂠
󱂞
󱂟
󱂓Power
Turns the Soundbar on and off.
•Auto Power Down Function
The unit turns off automatically in the following situations:
– In D.IN / Wi-Fi / BT mode if there is no audio signal for
18 minutes.
󱂔D.IN
Press to enter the “D.IN” mode.
󱂕(Source)
Press to select a source connected to the Soundbar.
󱂖(Mute)
Press the (Mute) button to mute the sound.
Press it again to unmute the sound.
󱂗(Sound Control)
When pressed, the setting items such as TREBLE, or SYNC are
displayed in sequence. The desired item can be adjusted using
the Up/Down buttons.
󱂘VOLUME
Push the button up or down to adjust the volume.
󱂙STANDARD
Press this button to outputs the original sound.
󱂚Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode. Press the button and wait for the “BT PAIRING” screen to
connect to a new Bluetooth device.
󱂛p(Play / Pause)
You can also play or pause music by pressing the button.
󱂜Up/Down/Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
󱂝Info
When pressed, the information for the connected sources and Bluetooth devices appears.
󱂞BASS
Push this button up or down to adjust the bass volume within a -6 to +6 range.
󱂟ADAPTIVE
Press this button to analyzes the content in real time and automatically provides the optimal sound eld
based on the characteristics of the content.
󱂠SURROUND
Press this button to provide a wider sound stage than standard.

ENG - 10
04 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Connect the Soundbar to an electrical outlet in the
following order:
1. Connect the AC/DC adapter to the Soundbar.
2. Connect the power cord to a wall socket.
•For more information about the required
electrical power and power consumption,
refer to the label attached to the product.
(Label: Bottom of the Soundbar Main Unit)
CAUTION ! TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE AC/DC
ADAPTOR TO RAIN OR MOISTURE.
Rear of the Soundbar Main Unit
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
AC/DC Adapter
•While the cable is not in use, seal it with the
silicone.
NOTES
•If you unplug and reconnect the power
cord when the product is turned on, the
Soundbar turns on automatically.
•Never forcibly pull the power cord of AC/
DC adapter.
•When installing the AC/DC adapter
horizontally, place it with the Samsung
logo facing upward.
How to mount the AC/DC
adapter
•Tighten 2 or 4 screws (not supplied) on the
wall or table and then insert them into the
grooves on the rear of the AC/DC adapter.
You cannot install the adapter directly on
the oor.
•For the mounting screws, see the following
gures.
RecommendedScrewspecication
(not supplied)
L12
M3
6.5 mm
4.5 mm