Samsung Spinpiont F1 DT SERIES Owner's manual

Desktop Class
Spinpoint F1 DT
80GB 160GB 320GB 500GB 640GB 750GB 1TB
Model 8MB HD083GJ HD161GJ HD321HJ HD501IJ
16MB HD162GJ HD322HJ HD502IJ HD642JJ
32MB HD753LJ HD103UJ
FEATURES
• MAX.334GB Formatted Capacity Per Disk • Environment friendly product with RoHS compliance
• Serial ATA 3.0Gbps Interface Support • Improved performance with dual-ARM based firmware
• Improved recording stability over temperature with PMR • ATA S.M.A.R.T. Compliant
• Advanced dynamic FOD control for best data integrity • ATA Automatic Acoustic Management Feature
• Intelligent compensation of external disturbance • ATA 48-bit Address Feature
• SATA Native Command Queuing Feature • ATA Device Configuration Overlay Feature
• Device Initiated SATA Power Management • NoiseGuard™
• Rotational vibration sensort • SilentSeek™
Interface Serial ATA 3.0Gbps Temperature
Buffer DRAM Size28 / 16 / 32 MB Operating 0 ~ 60 °C
Byte per Sector 512 bytes Non-operating -40 ~ 70 °C
Rotational Speed 7,200 RPM Humidity (non-condensing)
Operating 5 ~ 90 %
Non-operating 5 ~ 95 %
Average Seek time (typical) 8.9 ms Linear Shock (1/2 sine pulse)
Average Latency 4.17 ms Operating 70G
Data Transfer Rate Non-operating 160~320GB 350 G
Media to/from Buffer (Max.) 175 MB/sec 500~1000GB 300 G
Buffer to/from Host (Max.) 300 MB/sec Altitude (relative to sea level)
Drive Ready Time (typical) 160~320GB 8 sec Operating -300 to 3,000 m
500~640GB 12 sec Non-operating -300 to 12,000 m
750~1000GB
Height (Max.) 26.1 mm
Non-recoverable Read Error 1 sector in 1015bits Width 101.5 mm
Start/Stop Cycles 50,000 Length 147.0 mm
Weight (avg.) 160~320GB 470 g
500/640GB 610 g
Idle 160~320GB 2.45 Bel 750/1000GB 650 g
500-1000GB 2.70 Bel
Performance Seek 250/320G
B
2.80 Bel
500-1000
G
2.90 Bel * Note : Design and specifications are subject to change without prior not
1.1MB = 1,000,000 Bytes, 1GB=1,000,000,000 Bytes
2. A small portion of the 8/16/32MB buffer memory is reserved for
Voltage +5V±5%, +12V±10% firmware use
Capacit
y
13 Average value with a high performance cover.
4 Random seek with 30% duty cycle.(Average value)
Spin-up Current (Ma
x
2.0A 2.3A 2.4A
Seek
(
t
y
pical
)
45.7W 6.9W 7.6W
Read/Write (typical) 6.1W 7.4W 8.4W
Idle (typical) 4.4W 5.7W 6.7W
Standby (typical) 0.7/1W 0.7/1W 0.7/1W
Sleep (typical) 0.7/1W 0.7/1W 0.7/1W
3.5" HDD product specification Rev 4.8
Match with product manual Rev 1.0
ACOUSTICS3
ENVIRONMENTAL SPECIFICATIONS
PHYSICAL DIMENSION
POWER REQUIREMENTS
500GB
650GB 750GB 1000GB
160GB
250GB
320GB
Capacity
DRIVE CONFIGURATION
PERFORMANCE SPECIFICATIONS
RELIABILITY SPECIFICATIONS
250GB
HD251HJ
HD252HJ