
Operation
English14
Operation
Using the buttons and display
8:
89
8;
01 Display
-Displays the current mode (‘MIN, MID, MAX, JET, or WET’) or the
alert message.
02 Power ( )
-Press this button to turn on or off the vacuum cleaner.
-When you turn on the power, the vacuum cleaner starts in the ‘MID’
mode.
-If you assemble the Spray Spinning Sweeper, the vacuum cleaner
starts in the ‘WET’ mode.
03 Suction powercontrol (+/ -)
-You can change the suction powermode (‘MIN, MID, MAX, or JET’).
-In the ‘WET’ mode, press the +button to spraywater once or press
and hold the +button to spraywaterfor up to 2 seconds.
-Press and hold the +button for3 seconds to enter or exit the
language setting. Press the +or –button to select a language.
-While the vacuum cleaner is on the Clean Station, press and hold the
+button for 5 seconds to enable or disable the Energy Saving mode.
NOTE
• Only the +button works when the vacuum cleaneris in the ‘WET’ mode.
• You cannot enterthe language settings when the vacuum cleaneris in the ‘WET’ mode.
• The Energy Saving mode is automatically disabled if you use the vacuum cleaner.
• The brush may cling to the flooror does not turn properly depending on the floormaterial (a carpet, a
mat, bedding, etc.). If such a problem occurs, change the suction powermode to ‘MIN or MID’.
Alert messages
Message Explanation
Low battery Displays when battery is low.
Object stuck in brush/tool Errordisplays when something is caught in the brush or tool.
Filternot inserted Errordisplays when Micro Filter is missing.
Clogged Error displays when the vacuum cleaner is clogged.
Check brush, tool, orfilter Alerts the userto check the brush, tool, orfilter in orderto
solve the clogging error.
Clean Micro filter Alerts and recommends the user to regularly check and wash
the Micro Filter.
Energy Saving on Displays when the Energy Saving mode is on.
Energy Saving off Displays when the Energy Saving mode is off.
Untitled-1 14 2022-09-05 2:46:01