
Doporučené příslušenství
CS
SLD 03 dálkové ovládání pro nastavení parametrů infračervených čidel
SLZ 01Y napájecí zdroj 24 V DC pro max. 2 ks splachovačů
SLZ 01Z napájecí zdroj 24 V DC pro max. 4 ks splachovačů
SLZ 04Y
napájecí zdroj 24 V DC na DIN lištu, pro max. 2 ks splachovačů
SLZ 04Z
napájecí zdroj 24 V DC na DIN lištu, pro max. 4 ks splachovačů
SLZ 04X
napájecí zdroj 24 V DC na DIN lištu, pro max. 7 ks splachovačů
Recommendedaccessories
EN
SLD 03
remote control for an adjustment of parameters of all products with infra-red sensor
SLZ 01Y
power supply 24 V DC for operating of max. 2 pcs. of fl ushing units
SLZ 01Z
power supply 24 V DC for operating of max. 4 pcs. of fl ushing units
SLZ 04Y power supply 24 V DC for DIN rail, for operating of max. 2 pcs. of flushing units
SLZ 04Z power supply 24 V DC for DIN rail, for operating of max. 4 pcs. of flushing units
SLZ 04X
power supply 24 V DC for DIN rail, for operating of max. 7 pcs. of flushing units
5
Wir, SANELA spol. s r.o. erklären dass dieser Product ist in Übereinstimmung mit die nächste Norm: 73/23/EHS and 92/31/EHS.
Dies ist erforderlich auf der Grundlage der gesetzlichen Bestimmungen für die Rücknahme und/oder Entsorgung von Verpackungsmaterial.
Alle Teile wird möglich nur mit Wasser, Seife und weichem Tuch putzen. Nicht aggressive und abradierende Putzmittel benutzen!
Wir empfehlen für die Reinigung das Produkt SLA 37, welches im SANELA – Sortiment erhältlich ist.
DE
Wszystkie wyroby można czyścić tylko wodą, mydłem i miękką szmatką. W żadnym przypadku nie można czyścić środkami chemicznymi.
Zaleca się używanie środka czyszcz ącego o nazwie SLA 37 z oferty Saneli.
Po wypakowaniu urządzenia zaleca się postępować zgodnie z instrukcją obsługi.
Producent posiada na swoje wyroby deklaracje zgodności na podstawie przepisu c.73/23/EHS and 92/31/EHS.
PL
Producătorul garantează că aceste produse au declarații de conformitate care respectă reglementările 73/23/EHS and 92/31/EHS.
Gestionarea ambalajelor se va realiza conform legislației în vigoare.
Componentele se vor curăța numai cu detergenți normali, apă și săpun. Este interzisă folosirea substanțelor
și materialelor abrazive.
Pentru întreținerea produselor din oțel inox recomandăm soluția SLA 37.
RO
Todas las piezas se pueden limpiar con agua, jabón y un paño suave. En cualquier caso, no es posible utilizar productos de limpieza
agresivos y abrasivos. Recomendamos utilizar un producto de limpieza SLA 37 de Sanela.
El productor asegura que este producto tiene declaración de conformidad de acuerdo con la ley núm. 73/23/EHS and 92/31/EHS.
Después de desembalar el producto es necesario proceder con el embalaje en acuerdo con la ley de los embalajes.
Le fabricant garantie que ce produit est en conformité avec la réglementation 73/23/EHS and 92/31/EHS.
Conformément à la loi, Il est nécessaire de se conformer à la procédure de déballage du produit.
Tous les composants doivent être nettoyés avec de l'eau savonneuse et un chiffon doux. Il est strictement interdit d'utiliser des nettoyants
agressifs et abrasifs. Nous recommandons d'utiliser pour le nettoyage le produit SLA 37 de SANELA assortiment.
FR
ES
De producten worden geleverd met een verklaring van overeenstemming met
73/23/EHS and 92/31/EHS
.
Het is verplicht om de wet in acht te nemen betreffende het omgaan met verpakkingsmateriaal.
Valymui naudoti tik vandenį, muilą ir minkštą medžiagą.
Jokiu būdu negalima naudoti abrazyvinių medžiagų turinčių priemonių.
Mes siūlome gaminių valymui naudoti SLA 37 iš kompanijos SANELA asortimento.
Išpakavus produktą būtina laikytis taisyklių atsižvelgiant į medžiagą, iš kurios pagaminta pakuotė.
Gamintojas garantuoja, kad šis produktas turi atitikties deklaraciją pagal reglamentą
73/23/EHS and 92/31/EHS
.
NL
LT
Alle onderdelen moeten schoongemaakt worden met water, zeep en een zachte doek. Het is ten strengste verboden om een agressief
en/of schurend middel te gebruiken. Wij bevelen aan om het schoonmaakmiddel van Sanela te gebruiken (SLA 37).