Sangean RCR-5BK User manual

User Manual of Product 1:
Sangean RCR-5BK AM/FM Digital Tuning Clock Radio
User Manual of Product 2:
Sangean PS-300 Pillow Speaker with In-line Volume Control
and Amplifier (White)

RCR-5
Revision 2
D中文
GB

GB
1
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
8.
Read and understand all safety and operating instructions be-
fore the radio is operated.
Retain instruction: The safety and operating instructions should
be retained for future reference.
Heed warnings. All warnings on the appliance and operating in-
structions should be followed.
Follow all operations and use instructions.
Water and moisture: The appliance should not be used near
water. Do not use near a bathtub, washbowl, laundry tub, kitch-
en sink, wet basement, swimming pool, etc.
Unplug the radio from the AC power outlet before cleaning. Use
only a damp cloth for cleaning the exterior of the radio.
Do not place the radio on an unstable cart, stand, bracket or
table. The radio may fall, causing serious personal injury and
damage to the radio.
Ventilation: This radio should be situated so that its location or
position does not interfere with its proper ventilation. For exam-
ple, the radio should not be used on a bed, sofa, rug or other
soft surfaces that may block the ventilation openings. It should
not be placed in a built-in situation like a cabinet that may re-
duce air ow through the ventilation openings.

2
9.
10.
11.
12.
13.
Power sources: The radio should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your
radio dealer or power company.
Power cords: The power cord should be positioned so it is not
walked on, pinched, or items placed on top of it. Pay particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the unit. Unplug the power cord by
gripping the power plug, not the cord. Operate the radio using
only the current type of power source indicated. If you are not
sure of the type of power supply to your home, consult your
dealer or local power company.
Do not overload wall outlets or extension cords. This can result
in a risk of re or electrical shock. Never insert objects of any
kind into the radio through opening. The objects may touch
dangerous voltage points or short out parts. This could cause a
re or electrical shock.
If the radio is left attended and unused for long periods of time,
unplug it form the wall outlet. This will prevent damage caused
by lightning or power line surges.
If the radio is left unattended and unused for a long period of
time, remove the batteries. The batteries may leak and damage
furniture of your radio.

GB
3
14.
15.
16.
Do not attempt to service the receiver yourself. Removing the
cover may expose you to dangerous voltage, and will void the
warranty. Refer all servicing to authorized service personnel.
Object and Liquid Entry-Never push objects of any kind into
this radio through opening as they may touch dangerous volt-
age points or short-out parts that could result in a re or electric
shock. Never spill liquid of any kind of product.
The appliance should be serviced by qualied service person-
nel when:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen or liquid had been spilled into the radio.
C. The radio has been exposed to rain or water.
D. The radio does not appear to operate normally or exhibits a
marked change in performance.
E. The radio has been dropped, or the enclosure damaged.
IMPORTANT:
The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the
radio must remain accessible during normal use. In order to
disconnect the radio from the mains completely, the mains
adaptor should be removed from the mains outlet completely.

4

GB
5
Power on / off and Sleep Timer button
Band / Step button
NAP TIMER button
STATION PRESETS
TUNING Up / Down and Snooze
TIME SET / DISPLAY button
Alarm 2 button
Alarm 1 button
LCD Display
Volume Control knob
Headphones socket
AUX in
Display Backlight Adjustment button
Logo and specication mark
FM antenna
Power socket
Controls
2
3
1
5
7
16
15
14
13
12
11
10
9
4
6
8
Radio band and a.m. / p.m. display
Hour and minute digits
Second digits
Alarm indicators
Sleep timer
Nap timer
Week day
Clock set
LCD display
B
C
E
G
D
F
A
H

6
Operation
Clock Setting (date and time)
Clock time has to be set before alarm setting.
1. Press and hold the TIME SET button for more than 2 seconds,
the display will show , and ash the year digits.
2. Press TUNING Up/Down button to set the year.
3. Press the TIME SET button, then use the same way to set the
date.
* press and hold the TUNING Up/Down button for fast-forward
or fast-backward.
4. Press the TIME SET button to set the hour with TUNING Up/Down
button. Same way (press TIME SET then TUNING Up/Down) to
the minute. The day of week is automatically set.
5. After the minute is set, then press the TIME SET button to complete
the setting.
● While setting, the setting will be cancelled after 10 seconds
without pressing any buttons.
● After the time is under setting, the setting won’t be cancelled even
you don’t press any button for more than 10 seconds. You need
to press the TIME SET button to complete the setting, and the
second digit will be set to 0 at the moment when you press the
TIME SET button.

GB
7
Radio operation
Turn on the radio with the POWER button.
Tune into desired stations
Station selection
1. Press the TUNING up/down button, to tune into the frequency
of your desired stations
2. Scanning tuning- Press and hold the TUNING up/down button for
more than 0.5 seconds and release, the radio will search for the
next station.
STATION PRESETS
1. Tune into the stations that you would like to store.
2. Select a STATION PRESET button (1-5) and press it for more
than 2 seconds until a beep sounds and the station is now stored.
Note:
When you store a new station in a preset, the station previously
stored will be automatically erased.
Recall the station memories
To recall the station memories, simply press the BAND button to
select the required bands and press the required STATION PRE-
SET (1-5).
Volume
Turn the VOLUME knob to adjust the volume.

8
Alarm Clock
There are two alarms which can each be set to wake you to AM/FM
radio or buzzer alarm. The alarms may be set while the unit is in
standby mode or while playing. Ensure that the time is set correctly
before setting the alarms.
1. Before setting an alarm ensure the clock time is set. Press and
hold any of the Alarm button to enter the alarm setting (e.g. Alarm 1
button to enter the alarm 1 setting).
2. The hour setting of alarm 1, for example, will begin to flash.
Press the Tuning up/down button to select the required alarm
hour, and press the Display/ Time set button to conrm the setting.
Press the Tuning up/down button to select the required alarm
minute, and press the Display/ Time set button to confirm the
setting.
3. Then the display will show the frequency options for the alarm.
Press the Tuning up/down button to select the desired option
and press the Display/Time set button to conrm the setting.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays (Monday to
Friday)
WEEKEND –the alarm will sound only at weekends (Saturday
and Sunday)