Sangoma EXP100 User manual

EXP100 Expansion Module
We reserve the right to improve or change the product and the user guide without notice.
Copyright © 2016 SANGOMA TECHNOLOGIES.
We reserve the right to improve or change the product and the user guide without notice.
Copyright © 2016 SANGOMA TECHNOLOGIES.
EXP100 Expansion Module
Fold
Fold
FoldFold

EXP100 Expansion Module
The Sangoma EXP100 Expansion Module is used to extend the
functionality of Sangoma Phones by providing programmable hard
keys for BLF (Busy Lamp Field), speed-dial, call transfer, exten-
sions, etc. This allows users to deliver single-button access to
contacts / extensions.
The EXP100 Expansion Module is designed exclusively
for Sangoma Enterprise IP Phones
The EXP100 pairs with Sangoma IP Phones (excluding s300),
which means it inherits the same ready-to-go, out-of-box experi-
ence. It receives power directly from the host phone, so no power
adapter or wall-outlets are required. Depending on your configura-
tion, an AC to DC power adapter might be necessary for each
EXP100. These can be obtained separately. Additionally, connect
up to 6 EXP100s to deliver up to 240 programmable keys.
Full Integration with FreePBX and PBXact UC
All hard keys can be programmed directly from the EndPoint
Manager (EPM) module within FreePBX / PBXact UC, which allows
automatic configuration via Sangoma's exclusive Zero-Touch
provisioning! Layout customization is also a breeze by simply
pushing new changes without having to reboot. Now you can have
dedicated buttons for all your favorite Phone Apps!
Please visit our Wiki at
http://wiki2.sangoma.com/display/PHON/EXP100+Setup
for the EXP100 user guide and installation instructions.
Completed with FCC Part 15 Standards
FCC Part 15 Class B
For customers requiring AC power, AC to DC adapters can be purchased separately from Sangoma.
Alternatively, if you want to source your own power supply, the specications must meet the 5V / 1.2A input
rating. If the wrong power supply is used and the unit is damaged, the warranty will be void.
Connecting Sheet
with Screws
EXP100
Stand Power Adapter
(Sold Separately)
Ethernet Cable
Power from
EHS Port
Packaging Contents
EXP100 Expansion Module
The Sangoma EXP100 Expansion Module is used to extend the
functionality of Sangoma Phones by providing programmable hard
keys for BLF (Busy Lamp Field), speed-dial, call transfer, exten-
sions, etc. This allows users to deliver single-button access to
contacts / extensions.
The EXP100 Expansion Module is designed exclusively
for Sangoma Enterprise IP Phones
The EXP100 pairs with Sangoma IP Phones (excluding s300),
which means it inherits the same ready-to-go, out-of-box experi-
ence. It receives power directly from the host phone, so no power
adapter or wall-outlets are required. Depending on your configura-
tion, an AC to DC power adapter might be necessary for each
EXP100. These can be obtained separately. Additionally, connect
up to 6 EXP100s to deliver up to 240 programmable keys.
Full Integration with FreePBX and PBXact UC
All hard keys can be programmed directly from the EndPoint
Manager (EPM) module within FreePBX / PBXact UC, which allows
automatic configuration via Sangoma's exclusive Zero-Touch
provisioning! Layout customization is also a breeze by simply
pushing new changes without having to reboot. Now you can have
dedicated buttons for all your favorite Phone Apps!
Please visit our Wiki at
http://wiki2.sangoma.com/display/PHON/EXP100+Setup
for the EXP100 user guide and installation instructions.
Completed with FCC Part 15 Standards
FCC Part 15 Class B
For customers requiring AC power, AC to DC adapters can be purchased separately from Sangoma.
Alternatively, if you want to source your own power supply, the specications must meet the 5V / 1.2A input
rating. If the wrong power supply is used and the unit is damaged, the warranty will be void.
Connecting Sheet
with Screws
EXP100
Stand Power Adapter
(Sold Separately)
Ethernet Cable
Power from
EHS Port
Packaging Contents