Sanipex Bagnodesign BRIGLIA BDR-BRG-060-MB User manual

BAGNODESIGN
  
Installation Guide
BDR-BRG-060-MB
BRIGLIA ILLUMINATED MIRROR Ø600MM WITH SENSOR MATT
 
Please leave these instructions with the customer

 
            

 

  



 
     
 
  

            
     

            


 




 
  

BAGNODESIGN

Fix the belt with screws in the screw holes on both sides of the
mirror frame (as shown in the picture)
Power Off
ON
J
OFF
(3)
Please cut off all the power before the connection 


X3
Hang well the mirror, straighten the belt, mark the hook hole of
the belt with a pencil, and then punch the hole an d fix well the
base on the wall
adjust the belt buckle 
adjust the belt buckle(as see picture) 
/ x2
(2)
Use flexible rule to measure the distance between two parallel hooks
(A) ,and mark this paralle distance on the wall , and drill a hole on
both end, and last fix the D6 expansion screw into two hole.
Brown/black



neutl S
AIRE 
I To connect as above photo
MAI
install hook fitting and the belt( as see picture)
test the functions





(1)
(5)
(4)
(6)
(7)
(8)

Function usage
0
"Switch" sign
1, Please choice below operation according to what product you buy:
A, Touch switch.
B, Touch switch holding to gradually dim.
C, Touch switch press-hold color change.
D, Tap-tap touch color change.
E, The first short touch, turn on the light and demist pad;The second
short touch, chang the color temperature;The third short touch, turn off
the light and demist pad,when the light be turned on; the first holding
touch; the brightness of the light can be changed from
100% to 10% or 10% to100%,the second holding touch; the brightness of
the light can be changed from 10% to 100% or 100% to 10%
parts list
�E
M4screw D6 expansion screw
Hook The saew for the belt M4 screw
The belt
Installation tools ( as shown below)
Flexible rule Leveling instrument Churn drill Screwdriver Hammer
Warm tips:
1, Please do not use,if the product have any broken.
2, During operation,never put hard and sharp materials directly against the mirror surface. Otherwise, it may
result in current leakage and even personal injury accident.
3, Never forget to turn off the power switch in storm days. Otherwise,light ning may damage electric elements
of the product.
4, During normal operation, never forcibly pull out the power plug to stop the product. Otherwise, electric
elements of the product may be damaged.
5, Please pull out the power plug if the product is not used for a long time.
6, In case of functional failure of the product, users are not allowed to disassemble and repair without
authorization, otherwise, our company will not be responsible for any safety accidents

Note:

INR-BRG-060-MB-05-21