Sanipex BAGNODESIGN MONTMARTRE BDR-MNT-070-CL User manual

BDR-MNT-070-CL
MONTMARTRE BEVELED MIRROR 700X1000
www.sanipexgroup.com

Manual
Dear distinguished user, it is grateful if you could
follow the steps below when you install the eco-
friendly, high transparency copper free mirrors:
1. Clean the walls and neighboring areas where you want to install the mirror, it's
better to make sure there is no acid, alkaline or any other corrosive substantial
remains on the wall or near the area;
2. It is advisable to wash your hands before installing it, in order to reduce the risk
of it is recommended if you wear a pair of gloves;
3. When the installation is done, it is advised to clean the surface, edge and back if
you can reach on the mirror by a soft cloth, with tap water, purified water or
qualified glass cleanser, then make it dry by tissue paper, no hard materials and
corrosive detergent is allowed;
4. For a better daily use, to keep the room ventilated, it is better to open the
window or start the ventilator after your shower / bath
sure no steam or hot air surrounding the mirror for longer time, when any
pollution is found on the mirror, especially on the edges, please make it cleaned
in time.
Thank you for your kind reading, We wish you a happy bath time!

INSTRUCTION
(1) (2) (3) (4)
(5)
(6)
A
B

INR-MNT-070-CL-04-23
www.sanipexgroup.com