Sanyo VM-6614 User manual

B/W Video Monitor
VM-6614
INDEX
1. SAFETY PRECAUTIONS
SPECIFICATIONS
DISASSEMBLY
OPERATING INSTRUCATIONS
SERVICE ADJUSTMENTS
2.
3.
4.
PARTS LIST
BLOCK DIAGRAMS, CIRCUIT DIAGRAMS
PRINTED WIRING BOARDS
Click on this button found on the first page of each file
to return to this screen.
VM-6615P
I
index

VM-6614
FILE NO.
REFERENCE No.SM5310264
L8MAC/US,XE,UK,AU
NOTE: 1. Parts order must ontain model number, part number, and des ription.
2. Substitute parts may be supplied as the servi e parts.
3. N.S.P. : Not available as servi e parts.
Design and spe ifi ations are subje t to hange without noti e.
(Product Code : 114 901 31)
(U.S. , Canada)
SERVICE M NU L
B/W Video Monitor
CONTENTS
SPECIFICATIONS .................................................................... 3
1. OPERATING INSTRUCTIONS ............................................. 5
2. SERVICE ADJUSTMENTS ................................................... 7
3. PARTS LIST ......................................................................... 9
4. CIRCUIT DIAGRAMS ......................................................... 13
(Product Code : 114 901 34)
(Europe)
VM-6615P
(Product Code : 114 901 36)
(U.K.)
(Product Code : 114 901 38)
( ustralia)
I
index

9
3. PARTS LIST
Note:
Alphabetic caracters enclosed by ( ) in the descriptions indicate destination for the V -6615P.
V -6615P(AU): Australia V -6615P(XE): Europe V -6615P(UK): United Kingdom
V -6614: NTSC area (U.S.A., Canada)
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
1 645 046 5215 FRONT PANEL MT-15S OC-00067 [VM-6614,
VM-6615P(UK)]
1 645 047 0660 FRONT PANEL MT-15S AA-51 [VM-6615P(AU),
(XE)]
2 645 046 04 7 VR KNOB VR MT-9 OC-00067 [VM-6614,
VM-6615P(UK)]
2 645 047 0622 VR KNOB VR MT-9 AA-51 [VM-6615P(AU), (XE)]
3 645 046 0494 SW KNOB MT-9 OC-00067 [VM-6614,
VM-6615P(UK)]
3 645 047 0639 SW KNOB MT-9 AA-51 [VM-6615P(AU), (XE)]
4 645 046 517 DECORATED PLATE MT-20 OC-00067 [VM-6614,
VM-6615P(UK)]
4 645 047 060 DECORATED PLATE MT-20 AA-51
[VM-6615P(AU), (XE)]
5 645 046 0432 LOGO MT-9OC-00067 [VM-6614, VM-6615P(UK)]
5 645 047 0547 LOGO MT AL AA-51 [VM-6615P(AU), (XE)]
6 645 046 6496 VR ASS’Y MT-15S
7 645 034 3 10 POWER SWITCH SS-160-7 (Included in the
VR ASS’Y)
645 034 3605 RH W/W SCR. 3* MM
9 645 034 3575 PH W/W SCR. 3* MM
10 645 046 5 64 CRT MI1547P4AU CPT
10 645 046 5 57 CRT MI1546P4AU CPT
11 645 046 603 YOKE MM-15A
12 645 046 6175 L TYPE MM-15A (L)
13 645 046 61 2 L TYPE MM-15A (R)
14 645 034 3599 PH W/W SCR. 4*1 MM
15 645 046 5413 CRT GND WIRE/1015 22AWG (N.S.P.)
16 645 034 4619 METAL CABINET CM-14
17 645 034 35 2 PH W/W SCR. 4* MM
1 645 034 3919 HANDLE COVER CM-14 PA-765A
19 645 034 35 2 PH W/W SCR. 4* MM
20 645 034 3 41 ID LABEL 3*51MM (N.S.P.)
21 645 034 4299 PCB GUIDE RAIL PCB MM-12A
22 645 046 6007 FBT TRANS. CEM-15A CBC (Included in the
main board)
23 645 034 3612 SCREW+WASHER 3*6MM
24 645 035 6223 WASHER OUT TEETH 4.5* .5*0.5MM
25 645 046 0401 BNC CONNECTOR BNC 13-2 75OHM
26 645 046 041 SLIDE SWITCH SS004-P012BJ-PA6
27 645 034 4626 BASE CM-14+Y/C (N.S.P.)
2 645 034 3605 RH W/W SCR. 3* MM
29 645 034 3926 FOOT PAD RIVET MM-12A GL-24H
30 645 034 4657 FOOT PAD GL-24H
31 645 035 6216 BH SCREW 4*6MM
32 645 046 6519 AC SOCKET ASS’Y MM-15A
33 645 046 6403 JACK PLATE MM-15S AA-51
34 645 03 5599 SHRINK TUBE 2.5DIA. (N.S.P.)
35 645 034 35 2 PH W/W SCR. 4* MM
36 645 035 9422 PCB HOLDER PCB CM-14A (L)
37 645 035 9415 PCB HOLDER PCB CM-14A (R)
3 645 046 4942 WASHER IN TEETH 13*17*0.6MM
39 645 046 4 9 NUT 12*14*2.5MM
40 645 047 9540 VIDEO BOABD MT-15S
41 645 046 0500 LED LENS MT-9/12/15/20
42 645 047 9564 MAIN BOARD MT-15S (NORMAL)
1
4
5
2
3
67
10
11
13
12
1415
21
22
36
27
2
9
30
29
3734
26
39 31
24 32
25
33
16 1
17
1920
3
23
40
35
42
VM-6614
41
N.S.P.: Not available as service parts.
CABINET & CHASSIS PARTS

10
ELECTRICAL PARTS
Note:
1. Materials of Capacitors and Resistors are abbreviated as follows ;
Resistors Capacitors
CF RES Carbon Film Resistor MEF CAP Metalli ed Polyester Film Capacitor
MF RES Metal Film Resistor (Non-inductive)
MOF RES Metalli ed Oxide Film Resistor MEMB CAP Mini Box Metalli ed Polyester Capacitor
(Non-inductive)
PEI CAP Polyester Film Capacitor (Inductive)
PPN CAP Polypropylene Film Capacitor (Non-inductive)
PPS CAP Polypropylene and Metalli ed Polypropylene
Film Capacitor (Non-inductive)
MPP CAP Metalli ed Polypropylene Capacitor
(Non-inductive)
X CAP(MKP) Metalli ed Polypropylene Film Capacitor
(Non-inductive)
CC CAP Ceramic Capacitor
EC CAP Electrolytic Capacitor
2. N.S.P. : Not available as service parts.
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
AIN BOARD T-15S (NOR AL)
645 047 9564
(CAPACITORS)
C207 645 034 273 EC CAP 2.2UF 50 V
C20 645 034 2714 EC CAP 220UF 16 V
C301 645 040 991 PEI CAP .033UF 50V +/-5%
C302 645 046 405 PEI CAP .06 UF 50V +/-5%
C303 645 046 42 7 MEMB CAP .1UF 63V +/-5%
C304 645 034 3025 MEMB CAP .22UF 63V +/-5%
C305 645 034 2615 EC CAP 100UF 25 V
C306 645 046 393 CC CAP 33PF 50V +/-5%
C307 645 034 3025 MEMB CAP .22UF 63V +/-5%
C30 645 046 42 7 MEMB CAP .1UF 63V +/-5%
C309 645 046 42 7 MEMB CAP .1UF 63V +/-5%
C310 645 046 42 7 MEMB CAP .1UF 63V +/-5%
C311 645 046 377 EC CAP 4.7UF 25 V
C312 645 034 2653 EC CAP 1000UF 16V 10DIA.
C313 645 047 0530 EC CAP 2200UF 16V <=13DIA.
C401 645 046 4027 PEI CAP .0033UF 50V +/-5%
C402 645 034 27 3 EC CAP 470UF 16 V
C403 645 034 2677 EC CAP 1UF 50 V
C404 645 034 301 MEMB CAP .01UF 63V +/-5%
C405 645 046 0074 PPN CAP .0056UF 50V +/-5%
C406 645 046 42 7 MEMB CAP .1UF 63V +/-5%
C407 645 046 42 7 MEMB CAP .1UF 63V +/-5%
C40 645 034 27 3 EC CAP 470UF 16 V
C409 645 046 4041 PEI CAP .056UF 50V +/-5%
C410 645 046 4140 MEF CAP 2.7UF 100V +/-5%
C411 645 046 3761 EC CAP 470UF 25V 105C
C412 645 046 4201 PPN CAP .027UF 630V +/-5%
C413 645 034 27 3 EC CAP 470UF 16 V
C414 645 034 2950 PEI CAP .022UF 50V +/-5%
C415 645 043 3139 CC CAP 103PF 1.5KV Z5U
C416 645 046 364 EC CAP 1UF 160 V
C417 645 046 3570 EC CAP 47UF 160V +/-20%13*21
C419 645 034 2776 EC CAP 47UF 16 V
C421 645 034 2 75 CC CAP 6 1PF 50V Y5P
C422 645 043 3139 CC CAP 103PF 1.5KV Z5U
C430 645 046 3 91 CC CAP 561PF 1KV Y5P
C902 645 046 4331 X CAP .22UF 250V +/-10%22.5M
C902 645 046 434 X CAP .22UF 275V +/-10%22.5M
C903 645 034 30 7 Y CAP 472PF 400V +/-20%
C904 645 034 30 7 Y CAP 472PF 400V +/-20%
C906 645 034 30 7 Y CAP 472PF 400V +/-20%
C907 645 045 994 EC CAP 100UF 400V 22DIA.
C90 645 034 2622 EC CAP 100UF 35 V
C910 645 043 3139 CC CAP 103PF 1.5KV Z5U
C913 645 046 3 77 CC CAP 391PF 50V Y5P
C915 645 046 42 7 MEMB CAP .1UF 63V +/-5%
C917 645 034 301 MEMB CAP .01UF 63V +/-5%
C91 645 034 301 MEMB CAP .01UF 63V +/-5%
C920 645 046 4119 MEF CAP .22UF 50V +/-5% 7.5MM
C923 645 046 3617 EC CAP 1000UF 16V 105C
C924 645 034 27 3 EC CAP 470UF 16 V
(DIODES)
D301 645 034 3377 RECTIFIER DIODE 1N4003
D401 645 046 4669 RECTIFIER DIODE PS154R
D402 645 046 4690 RECTIFIER DIODE UF5402G
OR 645 046 02 9 RECTIFIER DIODE 30DF2
D403 645 034 3315 DIODE 1N414
OR 645 034 330 DIODE 1N414
D404 645 046 4652 RECTIFIER DIODE 15DF6
D405 645 034 3346 RECTIFIER DIODE BYT52M T52MM
D406 645 046 4669 RECTIFIER DIODE PS154R
D40 645 034 3315 DIODE 1N414
OR 645 034 330 DIODE 1N414
D901 645 046 0241 RECTIFIER DIODE 1N4007
D902 645 046 0241 RECTIFIER DIODE 1N4007
D903 645 046 0241 RECTIFIER DIODE 1N4007
D904 645 046 0241 RECTIFIER DIODE 1N4007
D905 645 046 025 RECTIFIER DIODE BA159
D906 645 040 9141 RECTIFIER DIODE PG102R
OR 645 046 4645 RECTIFIER DIODE PS104R
D910 645 034 3315 DIODE 1N414
OR 645 034 330 DIODE 1N414
ZD901 645 046 4607 ZENER DIODE HZ20-2
D914 645 046 4690 RECTIFIER DIODE UF5402G
OR 645 046 02 9 RECTIFIER DIODE 30DF2
D915 645 046 4591 DIODE 1N4606
(FUSE)
F901 645 046 0 21 FUSE 2A/250V SLOWBLOW 5*20MM
(INTEGRATED CIRCUIT)
IC301 645 046 012 LINEAR IC TDA1175P
IC401 645 046 0104 LINEAR IC LM1391N
IC901 645 034 3094 LINEAR IC UC3 42AN
(COILS)
L401 645 046 0 76 CHOCK COIL 20 UH +/-20%
OR 645 046 0 3 CHOCK COIL 20 UH +/-20%
OR 645 046 0 90 CHOCK COIL 20 UH +/-20%
L402 645 046 0 3 WIDTH COIL VM-14AF
OR 645 046 0 52 WIDTH COIL VM-14AF
OR 645 046 0 45 WIDTH COIL VM-14AF
L403 645 046 0 69 LINEARITY COIL 15 UH +/-20%
L905 645 046 0 76 CHOCK COIL 20 UH +/-20%
L905 645 046 0 3 CHOCK COIL 20 UH +/-20%
OR 645 046 0 90 CHOCK COIL 20 UH +/-20%
PIN 645 046 0371 CONNECTOR BASE 103 H
(SE ICONDUCTORS)
Q205 645 046 450 TR 2SA1015GR
OR 645 034 3209 TR 2SA733P
Q401 645 034 3216 TR 2SC1 15GR
Q402 645 046 0159 TR 2SC1959Y
Q403 645 046 4546 TR 2SC4106M
Q405 645 046 0197 TR 2SD1609C
Q406 645 046 0197 TR 2SD1609C
Q901 645 040 9127 FET SSS7N60A

11
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
(RESISTORS)
R201 645 034 2356 CF RES 75OHM 1/4W +/-5%
R222 645 045 9610 CF RES 200OHM 1/4W +/-5%
R223 645 045 9764 CF RES 6 0KOHM 1/4W +/-5%
R224 645 034 202 CF RES 220OHM 1/4W +/-5%
R225 645 034 2271 CF RES 560OHM 1/4W +/-5%
R226 645 034 2271 CF RES 560OHM 1/4W +/-5%
R227 645 034 1 61 CF RES 1KOHM 1/4W +/-5%
R301 645 034 2042 CF RES 2.2KOHM 1/4W +/-5%
R302 645 034 2042 CF RES 2.2KOHM 1/4W +/-5%
R303 645 034 2202 CF RES 4.3KOHM 1/4W +/-5%
R304 645 046 3310 MOF RES 3.3OHM 1W +/-5%
R305 645 040 7 6 CF RES 220KOHM 1/4W +/-5%
R306 645 045 9696 CF RES 3.3OHM 1/4W +/-5%
R307 645 045 9726 CF RES 56KOHM 1/4W +/-5%
R30 645 045 9726 CF RES 56KOHM 1/4W +/-5%
R309 645 046 294 CF RES 62KOHM 1/4W +/-5%
R310 645 040 724 CF RES 1OHM 1/2W +/-5%
R311 645 046 2 01 CF RES 470KOHM 1/4W +/-5%
R313 645 034 2127 CF RES 30KOHM 1/4W +/-5%
R314 645 046 2 56 CF RES 510KOHM 1/4W +/-5%
R316 645 034 1 92 CF RES 100KOHM 1/4W +/-5%
R317 645 034 2370 CF RES 2KOHM 1/4W +/-5%
R401 645 034 1 61 CF RES 1KOHM 1/4W +/-5%
R402 645 034 22 CF RES 5.6KOHM 1/4W +/-5%
R403 645 034 2325 CF RES 6. KOHM 1/4W +/-5%
R404 645 034 1922 CF RES 12KOHM 1/4W +/-5%
R405 645 034 2363 CF RES 20OHM 1/4W +/-5%
R40 645 034 19 4 CF RES 15KOHM 1/4W +/-5%
R409 645 045 9597 CF RES 150OHM 1/4W +/-5%
R410 645 045 9726 CF RES 56KOHM 1/4W +/-5%
R411 645 034 22 CF RES 5.6KOHM 1/4W +/-5%
R412 645 034 2073 CF RES 2.4KOHM 1/4W +/-5%
R413 645 03 5353 CF RES 1. KOHM 1/4W +/-5%
R414 645 046 2436 CF RES 2KOHM 1/2W +/-5%
R415 645 034 2363 CF RES 20OHM 1/4W +/-5%
R416 645 046 2 70 CF RES 56OHM 1/4W +/-5%
R417 645 046 3211 MOF RES 20OHM 3W +/-5%
R420 645 046 29 6 CF RES 6 0OHM 1/2W +/-5%
R421 645 046 2207 CF RES 10KOHM 1/2W +/-5%
R422 645 040 23 CF RES 620OHM 1/4W +/-5%
R423 645 034 2257 CF RES 47KOHM 1/4W +/-5%
R424 645 046 2412 CF RES 1 0KOHM 1/4W +/-5%
R425 645 040 16 CF RES 470OHM 1/4W +/-5%
R427 645 045 95 0 CF RES 1MOHM 1/4W +/-5%
R42 645 046 2603 CF RES 300KOHM 1/4W +/-5%
R429 645 046 3051 CF RES .2KOHM 1/2W +/-5%
R430 645 046 3440 MOF RES 6. KOHM 1W +/-5%
R431 645 046 3372 MOF RES 4.7KOHM 1W +/-5%
R433 645 034 1 7 CF RES 10KOHM 1/4W +/-5%
R434 645 045 9733 CF RES 560KOHM 1/4W +/-5%
R435 645 046 2641 CF RES 330KOHM 1/4W +/-5%
R436 645 046 3471 MOF RES 2KOHM 3W +/-5%
R437 645 03 5360 CF RES 910OHM 1/4W +/-5%
R491 645 034 1991 CF RES 150KOHM 1/4W +/-5%
R901 645 046 2 1 CF RES 470KOHM 1/2W +/-5%
R902 645 045 9924 W-W RES 3.9OHM 3W +/-5% 5MM
R903 645 046 3402 MOF RES 0.47OHM 1W +/-5%
R907 645 034 2547 CEMENT RES 10KOHM 5W +/-5% 5MM
R909 645 034 2011 CF RES 22OHM 1/4W +/-5%
R911 645 034 1 92 CF RES 100KOHM 1/4W +/-5%
R913 645 034 2455 MOF RES 1OHM 2W +/-5%
R914 645 034 1 61 CF RES 1KOHM 1/4W +/-5%
R917 645 034 2042 CF RES 2.2KOHM 1/4W +/-5%
R91 645 040 16 CF RES 470OHM 1/4W +/-5%
R919 645 034 19 4 CF RES 15KOHM 1/4W +/-5%
R921 645 034 1 92 CF RES 100KOHM 1/4W +/-5%
R923 645 034 2226 CF RES 47OHM 1/4W +/-5%
R924 645 034 19 4 CF RES 15KOHM 1/4W +/-5%
R925 645 034 2271 CF RES 560OHM 1/4W +/-5%
R926 645 034 23 7 CF RES 91OHM 1/4W +/-5%
R927 645 034 22 CF RES 5.6KOHM 1/4W +/-5%
R930 645 034 1 61 CF RES 1KOHM 1/4W +/-5%
R931 645 046 33 9 MOF RES 47KOHM 2W +/-5%
R932 645 046 33 9 MOF RES 47KOHM 2W +/-5%
(SWITCH)
SW201 645 046 041 SLIDE SWITCH SS004-P012BJ-PA6
(TRANSFOR ERS)
T401 645 046 0777 DRIVE TRANS. VM-14AF
OR 645 046 07 4 DRIVE TRANS. VM-14AF
OR 645 046 0791 DRIVE TRANS. VM-14AF
T402 645 046 6007 FBT TRANS. CEM-15A CBC
T901 645 046 5901 POWER TRANS. MM-12A VDE
OR 645 046 5925 POWER TRANS. MM-12A VDE
T902 645 046 0920 LINE FILTER TM-14T 20MH
(VARIABLE RESISTORS)
VR301 645 046 4744 POT VR 100KOHM 6DIA.
VR302 645 046 0340 POT VR 500KOHM 6DIA.
VR303 645 046 4 12 POT VR 50KOHM 6DIA.
VR401 645 034 3513 POT VR 5KOHM 6DIA.
VR402 645 046 0340 POT VR 500KOHM 6DIA.
VR404 645 046 0326 POT VR 2MOHM15DIA.
( ISCELLANEORS)
645 034 4404 FUSE CLIP BOARD TYPE 5*20MM (F901)
OR 645 034 4404 FUSE CLIP BOARD TYPE 5*20MM (F901)
B301 645 034 3773 CONNECTOR BASE M241 55
B401 645 046 0395 CONNECTOR BASE M113 4
B901 645 046 4997 CONNECTOR BASE M241 35-X
B902 645 034 3735 CONNECTOR BASE M241 33-X
BNC02 645 034 3674 CONNECTOR BASE M241 52
VIDEO BOABD T-15S
645 047 9540
(CAPACITORS)
C201 645 034 26 4 EC CAP 22UF 16 V
C202 645 034 2714 EC CAP 220UF 16 V
C203 645 034 2714 EC CAP 220UF 16 V
C204 645 046 3594 EC CAP 1000UF 10 V
C205 645 046 0012 CC CAP 272PF 50V Y5P
C206 645 034 260 EC CAP 100UF 16 V
C213 645 045 99 6 EC CAP 4.7UF 160 V
C219 645 043 3139 CC CAP 103PF 1.5KV Z5U
C220 645 046 4171 MEF CAP .47UF 100V +/-5%
(DIODE)
D201 645 034 3377 RECTIFIER DIODE 1N4003
(COIL)
L201 645 046 0913 PEAKING COIL 4.7 UH +/-10%
(SE ICONDUCTORS)
Q201 645 034 3216 TR 2SC1 15GR
Q203 645 046 0203 TR 2SD667C
Q204 645 046 0197 TR 2SD1609C
(RESISTORS)
R202 645 034 2059 CF RES 22KOHM 1/4W +/-5%
R203 645 034 19 4 CF RES 15KOHM 1/4W +/-5%
R204 645 045 9566 CF RES 100OHM 1/4W +/-5%
R206 645 034 2165 CF RES 390OHM 1/4W +/-5%
R210 645 034 2226 CF RES 47OHM 1/4W +/-5%
R211 645 034 1 47 CF RES 10OHM 1/4W +/-5%
R212 645 034 19 4 CF RES 15KOHM 1/4W +/-5%
R213 645 034 2103 CF RES 2.7KOHM 1/4W +/-5%
R214 645 046 2535 CF RES 27OHM 1/4W +/-5%
R215 645 046 2979 CF RES 6 OHM 1/4W +/-5%
R216 645 034 1977 CF RES 1.5KOHM 1/4W +/-5%
R217 645 034 1977 CF RES 1.5KOHM 1/4W +/-5%
R21 645 046 3266 MOF RES 2.4KOHM 2W +/-5%
R219 645 034 202 CF RES 220OHM 1/4W +/-5%
R220 645 046 2955 CF RES 6.2OHM 1/2W +/-5%
R230 645 046 3433 MOF RES 56KOHM 1/2W +/-5%
R231 645 045 9702 CF RES 47KOHM 1/2W +/-5%
R232 645 045 9573 CF RES 1KOHM 1/2W +/-5%
(SPARK GAPS)
SP201 645 035 940 SPARK GAP DSP 200V +/-10%
SP202 645 035 9392 SPARK GAP 0.75PF 1KV +/-10%
( ISCELLANEOUS)
S201 645 046 0524 CRT SOCKET CRT 7PIN 20DIA.
B201 645 046 03 CONNECTOR BASE M241 54
B202 645 034 3773 CONNECTOR BASE M241 55
B203 645 046 5000 CONNECTOR BASE M241 56-X
B204 645 034 3674 CONNECTOR BASE M241 52
GND 645 034 3667 CONNECTOR BASE P235142

12
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
VR ASS’Y T-15S
645 046 6496
(LED)
LED1 645 046 0296 LED 5DIA.
(SWITCH)
SW202 645 046 0425 ROTARY SWITCH 296S0947B
SW901 645 034 3 10 POWER SWITCH SS-160-7
(VARIABLE RESISTORS)
VR406 645 046 0319 VR 200KOHM 9DIA. 10 MMND F 15
VR201 645 046 0302 VR 500OHM 9DIA. 10 MMND F 15
( ISCELLANEOUS)
B703 645 046 03 CONNECTOR BASE M241 54
645 046 0463 USER MANUAL CCTV [VM-6614]
645 047 0615 USER MANUAL CCTV [VM-6615P(AU), (UK), (XE)]
645 03 5933 POWER CORD NS -5175N [VM-6614]
645 034 3971 POWER CORD 10-1 VDE [VM-6615P(XE)]
645 040 9257 POWER CORD NS -51 0N (AUSTRALIA)
[VM-6615P(AU)]
645 040 9264 POWER CORD NS -51 1N(U.K.) [VM-6615P(UK)]
645 035 6254 PE BAG 15" 406*406*900MM
645 034 4336 POLYFORM CM-14A
645 046 5161 CARTON MT-15S-EIA [VM-6614]
645 047 0592 CARTON MT-15S-CCIR [VM-6615P(AU), (UK),
(XE)]
ACCESSORIES

VM-6614
FILE NO.
REFERENCE No.SM5310264
L8MAC/US,XE,UK,AU
NOTE: 1. Parts order must ontain model number, part number, and des ription.
2. Substitute parts may be supplied as the servi e parts.
3. N.S.P. : Not available as servi e parts.
Design and spe ifi ations are subje t to hange without noti e.
(Product Code : 114 901 31)
(U.S. , Canada)
SERVICE M NU L
B/W Video Monitor
CONTENTS
SPECIFICATIONS .................................................................... 3
1. OPERATING INSTRUCTIONS ............................................. 5
2. SERVICE ADJUSTMENTS ................................................... 7
3. PARTS LIST ......................................................................... 9
4. CIRCUIT DIAGRAMS ......................................................... 13
(Product Code : 114 901 34)
(Europe)
VM-6615P
(Product Code : 114 901 36)
(U.K.)
(Product Code : 114 901 38)
( ustralia)

– 2 –
SAFETY PRECAUTIONS
WARNING:
Service should not be attempted by anyone unfamiliar with the necessary precautions for this recording or playback
equipment. The following precautions are necessary during servicing:
1. any electrical and mechanical parts in this recorder have
special safety-related characteristics for providing protec-
tion against shock, fire and other hazards. These charac-
teristics often go unnoticed in a visual inspection, and the
protection afforded by them cannot necessarily be ob-
tained by using replacement components with higher rat-
ings (voltage, wattage, etc.).
2. Replacement parts having special safety-related charac-
teristics are identified in this manual, and in the schematic
diagrams, by the symbol ! . These components have
values that are of special significance to product safety.
Should any component (identified by the symbol ) need
to be replaced, use only the part designated in the parts
List. Do not deviate from the specified resistance, wattage,
and voltage ratings.
3. Before returning the set to the customer, always perform an
AC leakage current check on the exposed metallic parts of
the cabinet, such as terminals, screwheads, metal over-
lays, etc. to be sure that the set is safe to operate without
the danger of electrical shock, Plug the AC line cord directly
into a 120 V AC outlet. (Do not use a line isolation trans-
former during this check.) Use an AC voltmeter with a
sensitivity of 5000 ohms per volt (or more) as follows:
Connect a 1500 ohms, 10 watt resistor, paralleled by a 0.15
mfd, 150 VAC capacitor, between a known good earth
ground (water pipe, conduit, etc.) and the exposed metallic
parts, one at a time. easure the AC voltage across the
1500 ohms resistor and 0.15 mfd capacitor combination.
Reverse the AC plug at the AC outlet and repeat the AC
voltage measurements for each exposed metallic part. The
measured voltage must not exceed 300 mVrms. This
corresponds to 200 µA AC. Any value exceeding this limit
constitutes a potential shock hazard and must be corrected
immediately.
4. Fuse symbol marks.
For CANADA
UNDERWRITERS LABORATORIES Standard
CAUTION "Risk of fire-replace fuse as marked"
For U.S.A.
Fuse rating is marked at
adjacent fuse.
Video
Monitor

– 3 –
EIA standard
15˝ measured diagonally, 90° deflection angle
ore than 1000 TV lines (center)
Horizontal: 15.75 kHz (EIA), Vertical: 60 Hz (EIA)
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Sub bright volume
Vertical size volume
Vertical hold volume
anual switchable, Hi/ 75 ohm (Lo)
Temperature: -10 °C to 40 °C, Humidity:10% to 90 %
AC 100 to 240 V 50/60 Hz
35 Watts
350 x 350 x 360 mm
11 kg
SPECIFICATIONS
VM- 14
System :
Picture tube :
Resolution :
Scanning frewuency :
Input terminals :
VIDEO A
VIDEO B
Outout terminals :
VIDEO A
VIDEO B
Sub Adjusting control :
Termination switch :
Operating environment :
Power source :
Power consumption :
Dimension (W x H x D ) :
Weight :
CCIR standard
15˝ measured diagonally, 90° deflection angle
ore than 1000 TV lines (center)
Horizontal: 15.625 kHz (CCIR), Vertical: 50 Hz (CCIR)
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Composite video: 1 line, BNC connector, 1.0 V p-p 75 ohm negative sync
Sub bright volume
Vertical size volume
Vertical hold volume
anual switchable, Hi/ 75 ohm (Lo)
Temperature: -10 °C to 40 °C, Humidity:10% to 90 %
AC 100 to 240 V 50/60 Hz
35 Watts
350 x 350 x 360 mm
11 kg
VM- 15P
System :
Picture tube :
Resolution :
Scanning frewuency :
Input terminals :
VIDEO A
VIDEO B
Outout terminals :
VIDEO A
VIDEO B
Sub Adjusting control :
Termination switch :
Operating environment :
Power source :
Power consumption :
Dimension (W x H x D ) :
Weight :

– 4 –
Fig. 1
WD
H
Fig. 2
DISASSEMBLY

(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
METALTOPCOVER

– 5 –
1. OPERATING INSTRUCTIONS
1-1. FRONT PANEL CONTROLS
1. Monitor Selector Switch (VIDEO A/B)
Turn this onitor selector switch A position for a
signal fed through the rear panel VIDEO A
connectors.
Then, turn this onitor selector switch B posi-
tion for a signal fed through the rear panel
VIDEO B connectors.
2. Contrast Control ( CONTRAST)
Turn to adjust picture contrast according to your
requirement.
3. Brightness Control ( BIRGHT)
Turn to adjust picture brightness according to
your requirement.
4. Power Indicator
Lights when the power is on.
Lit: When the power is on.
Unlit: When the power is off.
5. Power Switch (POWER)
Press this switch to turn the power on or off.
1-2. REAR PANEL CONTROLS & CONNECTION
1. AC input socket (AC INPUT)
Connect the AC power cord (supplied) securely
to this socket and to a wall outlet.
2. Video input terminals (VIDEO IN)
These terminals are used to input a video signal
source to this monitor.
Connect to the video output of a VCR or an-
other monitor (for loop through connection) or to
a video camera.
3. Video output terminals (VIDEO OUT)
These terminals are used to output a video
signal for this monitor.
Loop-through output of the video in BNC
connector, then connect to the video input of
another monitor or a VCR.
4. Termination Switch (HI/75 Ω (Lo))
Select the input impedance (HI/75 ohm).
When using only one monitor, turn the termina-
tion switch to the 75 ohm position. When using
more than one monitor, set all of the termination
switch to the monitors to the HI position.
However, the last monitor termination switch
should be the 75 ohm position for proper line
termination.
. Sub-brightness control (SUB-BRI)
Turn to adjust picture brightness.
7. Vertical Size control (V-SIZE)
Turn to adjust picture vertical size of the picture.
8. Vertical hold control (V-HOLD)
If the picture is scrolling up or down on the
screen, turn this control until there is a single
steady picture.
5
4
32
1
Fig. 3

– 6 –
Fig. 5
Fig. 4
Fig.
123
47
8
Single Connection
Monitor
Video recorder
Video camera
To Video B
INPUT terminal
(Video signal cable)
To Video A
INPUT terminal
(Video signal cable)
(Rear panel)
To Video input
terminal
To Video input
terminal
Monitor
Video recorder
Monitor Video recorder
To Video input terminal
Coaxial cable
Video camera

– 7 –
ADJUST ENT
ITE
TI ING
PATTERN SETTING VR
LOCATION ADJUST ENT PROCEDURE
VERTICAL
LINEARITY
ADJUST ENT
HORIZONTAL
HOLD AD-
JUST ENT
GEO ETRICE
DISTORTION
PATTERN
ADJUST ENT
VIDEO
CENTERING
ADJUST ENT
VIDEO TILT
ADJUST ENT
HORIZONTAL
WIDTH AD-
JUST ENT
VERTICAL
SIZE ADJUST-
ENT
VERTICAL
HOLD AD-
JUST ENT
NTERLACE
ADJUST ENT
RASTER
ADJUST ENT
FOCUS
ADJUST ENT
PATTERN GENERATOR
ODE CROSS-HATCHED
PATTERN
PATTERN GENERATOR
ODE CROSS-HATCHED
PATTERN
PATTERN GENERATOR
ODE CROSS-HATCHED
PATTERN
PATTERN GENERATOR
ODE ONOSCPE
PATTERN
PATTERN GENERATOR
ODE CROSS-HATCHED
PATTERN
PATTERN GENERATOR
ODE ONOSCPE
PATTERN
PATTERN GENERATOR
ODE ONOSCPE
PATTERN
PATTERN GENERATOR
ODE ONOSCPE
PATTERN
CA ERA SIGNAL
DISCONNECT VIDEO
SIGNAL AND
PATTERN GENERATOR
ODE FULL-WHITE
PATTERN
PATTERN GENERATOR
ODE ONOSCPE
PATTERN
Adjust VR303 to make equal distance
between top-center and bottom-center.
Turn off horizontal sync. (pin to ground)
Adjust VR401 to make pattern upright.
Adjust eigth magnets on the deflection
yoke make picture to the best condition.
The video is centered by roating the two
small at the rear of the yoke.
Loosen the screw on the rear of deflection
yoke, rotating the yoke to correct position
tighten the screw.
Adjust L402 to make picture width within
"2" position.
Adjust VR302 make height to "1.5"
position.
Adjust VR301 to make pattern stop rolling.
Adjust VR301 have gap of vertical scan
line distinguish clearly.
Adjust VR402 to the suitable brightness.
Adjust VR404 have control picture and 4
corners to be distinguished.
VR303
VR401
L402
VR302
VR301
VR301
VR402
VR404
2. SERVICE ADJUSTMENTS
1357 7531
1
3
5
1
3
5
5
3
1

5
3
1

Fig. 7
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO CENTER.
CONTRAST VR
AND BRIGHT
VR TO AX.
CONTRAST VR
AND BRIGHT
VR TO CENTER.

– 8 –
T901
VR401
H-HOLD
VR402
SUB-BRITE VR302
V-SIZE
VR404
FOCUS
T402
L402
Q403
E
C
B
VR301
V-LINE
VR406
BRIGHTNESS
SW901 LED1 VR201
CONTRAST

SW202
CHANNEL

AIN BOARD
VR BOARD
VR301
V-HOLD
Fig. 8
Fig. 9
MAIN BOARD
(Foil side)
VR BOARD
(Foil side)

-14-
1 2 3 4 5 6 7 8
A
B
C
D
E
F
G
H
I
J
K
B+ 12V
SW202
BA
SW201
R201
75
C201
22 
16V
R202
22K
R203
15K
R401
1K
C207
2.2 
50V
R222
200
R204
100
R402
5.6K
Q401
C1815
R227
1K
R206
390
Q201
C1815
C202
220 F
16V
R223
680K
R225
560
Q205
A1015
R226
560
C208
220 
16V
R301
2.2K
C301
0.33 
50V
R210
47
VR201
B500
R211
10
C203
220 
16V
R212
15K
R213
2.7K
R215
68
C204
1000 
10V
R214
27
C205
272P
R224
220
R302
2.2K
C302
0.068 
50V
C303
0.01 
50V
R304
3.3
1W
D301
1N4003
C305
100 
25V
R305
220K
C306
33P
50V
IC301
TDA1175P
V-DEF.
15 26
7
3
10
11
14
1
8916
R217
1.5K
R216
1.5K
Q204 D1609
D201
1N4003
C206
100 
16V
C213
4.7 
160V
R220
6.2
1/2W
L201
4.7 H
R218
2.4K
2W
C220
0.47 
100V
R232
1K
1/2W
R231
47K
1/2W
R219
220
SP201
SP202
1KV
Q203
D667C
CRT
D403
1N4148
D408
1N4148
R422
620
R429
8.2K
1/2W
R425
470
R430
6.8K
1W
R230
56K
1/2W
R428
300K
VR406
200K
C312
1000 
16V
V-DY
R308
56K
C311
4.7 
25V
C313
2200 
16V
R306
3.3
C308
0.01 
50V
R309
62K
R310
1
1/2W
C307
0.22 
50V
R311
470K
VR303
B50K
R313
30K
C310
0.1 
50V
C309
0.1 
50V
R314
510K
R307
56K
VR302
B500K
VR304
100K
R316
100K
R317
82K
VR301
B100K
C304
0.22 
50V
R303
4.3K
L403
H-LIN
L402
H-WIDTH
R420
680
1/2W
C430
560P
1KV
H-DY
R431
4.7K
1W
R414
2K
1/2W
R409
150
R403
6.8K
C402
470 
16V
C401
.0033 
50V
R404
12K
C403
1 
16V
C404
0.01 
50V
R411
5.6K
VR401
B5K
R410
56K
R408
15K
C405
.0056 
50V
C406
0.1 
50V
C407
0.1 
50V
R412
2.4K
C419
47 
16V
R405
820
R413
1.8K C408
470 
16V
R415
820
Q402
C1959Y
R416
56 R417
20
3W
T401
C409
0.056 
50V
R433
10K
C421
681P
R437
910 Q405
D1609
R434
560K R435
330K
Q406
D1609
12V
Q403
C4106
C410
2.7 
100V
R421
10K
1/2W L401
C414
0.22
R436
82K
3W
C422
103P
1.5KV
C413
470 
16V
C412
0.027 
630V
D404
15DF6
T402
D405
BYT52M
D406
PS154R
C415
103P
1.5KV
D401
PS154R
C411
470 
25V
D402
UF5402G
C416
1 
160V
FBT
C417
47 
160V
VR402
500K
R424
180K R461
150K
R427
1M
VR404
2M R423
47K
6
4
9
10
8
7
2
3
5
7
4
6
2
8
1
3
IC401 MC1391P
H-DEF.
C219
103P
1.5KV
4,5,12,13
GND
H-HOLD
V-SIZE
V-HOLD
V-SIZE
V-LIN
FACUS
SUB-BRIGHT
BRIGHT
CONT
MAIN_PWB
VR_PWB
VIDEO_PWB
VIDEO_PWB
VR_PWB
VR_PWB
MAIN_PWB
MAIN CIRCUIT DIAGRAM

-15-
12345678
A
B
C
D
E
F
G
H
I
J
K
SW901 F901
2A/250V
R901
470K
1/2W
C901
0.22 
250VAC
T902
LINE FILTER
R902
3.9
3W
R928
NONE
R921
100K
C902
0.22 
250VAC
C903
472P
400V
C904
472P
400V
1N4007 x 4
D903
D904
D901
D902
C906
472P
400V
C907
100 
400V
R903
0.47
1W
C908
100 
35V
R931
47K
2W
R932
47K
2W
C910
103P
1.5KV
R907
10K
5W D914
30DF2/
UF5402G
D905
BA159
L905
20 H
C923
1000 
16V
C924
470 
16V
1
3
6
5
11
12
R930
1K
LED1
12V
COM
D906
PG102R
R927
5.6K R916
NONE
EXT
SYNC
D915
1N4606
R926
91
R919
15K
D910
1N4148
R918
470
R917
2.2K
C920
0.22
R924
15K R922
NONE
C915
0.01
C917
0.01
C916
NONE
R909
22
ZD901
20-2
R911
100K
Q901
SSS7N60A
R914
1K
C913
390P
R913
1
2W
C918
0.01
R925
560
R923
47
SWITCHIG
OSC
7
2
1
8
4
5
6
3
L
N
GVR_PWB
MAIN_PWB
VR_PWB
MAIN_PWB
POWER CIRCUIT DIAGRAM

Mar./ '01 / 2300 MI Printed in Japan
SANYO Ele tri Co.,Ltd.
Osaka, Japan

– 2 –
SAFETY PRECAUTIONS
WARNING:
Service should not be attempted by anyone unfamiliar with the necessary precautions for this recording or playback
equipment. The following precautions are necessary during servicing:
1. any electrical and mechanical parts in this recorder have
special safety-related characteristics for providing protec-
tion against shock, fire and other hazards. These charac-
teristics often go unnoticed in a visual inspection, and the
protection afforded by them cannot necessarily be ob-
tained by using replacement components with higher rat-
ings (voltage, wattage, etc.).
2. Replacement parts having special safety-related charac-
teristics are identified in this manual, and in the schematic
diagrams, by the symbol ! . These components have
values that are of special significance to product safety.
Should any component (identified by the symbol ) need
to be replaced, use only the part designated in the parts
List. Do not deviate from the specified resistance, wattage,
and voltage ratings.
3. Before returning the set to the customer, always perform an
AC leakage current check on the exposed metallic parts of
the cabinet, such as terminals, screwheads, metal over-
lays, etc. to be sure that the set is safe to operate without
the danger of electrical shock, Plug the AC line cord directly
into a 120 V AC outlet. (Do not use a line isolation trans-
former during this check.) Use an AC voltmeter with a
sensitivity of 5000 ohms per volt (or more) as follows:
Connect a 1500 ohms, 10 watt resistor, paralleled by a 0.15
mfd, 150 VAC capacitor, between a known good earth
ground (water pipe, conduit, etc.) and the exposed metallic
parts, one at a time. easure the AC voltage across the
1500 ohms resistor and 0.15 mfd capacitor combination.
Reverse the AC plug at the AC outlet and repeat the AC
voltage measurements for each exposed metallic part. The
measured voltage must not exceed 300 mVrms. This
corresponds to 200 µA AC. Any value exceeding this limit
constitutes a potential shock hazard and must be corrected
immediately.
4. Fuse symbol marks.
For CANADA
UNDERWRITERS LABORATORIES Standard
CAUTION "Risk of fire-replace fuse as marked"
For U.S.A.
Fuse rating is marked at
adjacent fuse.
Video
Monitor
I
index