Sanyo MPX-CD16P User manual

INSTRUCTION MANUAL MPX-CD16P
MPX-MD16P
Multiplexer English GB
Multiplexer Deutsch D
Multiplexeur Français F
Multi distributore Italiano I
About this manual
• Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
• This manual gives basic connections and operating instructions for
2 models (Colour MPX-CD16P, B/W MPX-MD16P).
Über diese Bedienungsanleitung
• Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der
Kamera zuerst diese Bedienungsanleitung sorgfältig durch und
bewahren Sie sie zum späteren Nachschlagen auf.
• In dieser Anleitung finden Sie die Anschlüsse und die
Grundbedienung für 2 Modelle (Farbe: MPX-CD16P, Schwarzweiß:
MPX-MD16P).
Àpropos de ce manuel
• Avant d'installer et d'utiliser la caméra, veuillez lire ce manuel
attentivement. Gardez-le à portée de main pour toute référence
ultérieure.
• Ce manuel couvre les branchements et instructions pour l’utilisation
de base pour 2 modèles (Couleur: MPX-CD16P, noir et blanc:
MPX-MD16P).
Nota su questo manuale
• Prima di procedere all’installazione ed all’uso dell’apparecchio,
leggere attentamente questo manuale di istruzioni, e conservarlo
per ogni eventuale futura consultazione.
• Il manuale contiene le istruzioni per i collegamenti ed il
funzionamento di due tipi di modelli, l’MPX-CD16P (a colori) e
l’MPX-MD16P (in bianco e nero).
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18

PRECAUTION
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR OTHER MOISTURE.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
If the power supply cord (AC power cord) of this
appliance is damaged, it must be replaced. Return to
a SANYO Authorised Service Centre for replacement
of the cord.
Location
For safe operation and satisfactory performance of your
Multiplexer, keep the following in mind when selecting a
place for its installation:
•Shield it from direct sunlight and keep it away from
sources of intense heat.
•Avoid dusty or humid places.
•Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the Multiplexer. Do not place
the unit on a carpet because this will block the
ventilation holes.
•Install the Multiplexer in a horizontal position only.
•Avoid locations subject to strong vibrations.
•Avoid moving the Multiplexer between cold and hot
locations.
•Do not place the Multiplexer directly on top of the TV,
as this may cause playback or recording problems.
Avoiding Electrical Shock and Fire
•Do not handle the power cord with wet hands.
•Do not pull on the power cord when disconnecting it
from an AC wall outlet. Grasp it by the plug.
•If any liquid is spilled on the Multiplexer, unplug the
power cord immediately and have the unit inspected
at a factory-authorised service centre.
•Do not place anything directly on top of this
Multiplexer.
SERVICE
This unit is a precision instruments and if treated with
care, will provide years of satisfactory performance.
However, in the event of a problem, the owner is
advised not to attempt to make repairs or open the
cabinet. Servicing should always be referred to your
dealer or Sanyo Authorized Service Centre.
IMPORTANT NOTE (U. K. Only)
The wires in the mains lead are coloured according
to the following code:
Blue: Neutral
Brown: Live
If the colours of the wires in the mains lead of this
apparatus do not correspond with the colour
markings identifying the terminals in your plug,
proceed as follows:
•The wire which is coloured blue must be
connected to the terminal which is marked with
the letter Nor coloured blue or black.
•The wire which is coloured brown must be
connected to the terminal which is marked with
the letter Lor coloured brown or red.
•Do not connect either wire to the Earth terminal.
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
English 1

CONTENTS
FEATURES ....................................................................2
ACCESSORIES .............................................................2
LOCATION OF CONTROLS AND INDICATORS
Front Panel .....................................................................3
Back Panel......................................................................4
CONNECTIONS.............................................................5
ASSEMBLING THE DIN 25-PIN PLUG.........................6
ON-SCREEN MENUS....................................................7
CLOCK SETUP ..............................................................8
TITLE SETUP.................................................................9
ALARM SETUP ............................................................10
CLOCK, TITLE DISPLAY .............................................11
VCR SETUP .................................................................12
ALARM DATA DISPLAY ..............................................13
CAMERA SCREEN DISPLAY CONTROL ..................14
Split Screen Viewing.....................................................15
x2 Zoomed In Image Viewing .......................................15
Freezed Image Viewing................................................15
Full Screen Image Viewing...........................................16
Full Screen Sequential Viewing....................................16
Camera Live Picture and VCR Playback Picture
Simultaneous Viewing ..................................................17
Playback on Monitor 2 ..................................................18
Monitor 2 Display Setup................................................18
ALARMS
Alarm Display During Camera Live Picture Viewing.....19
Alarm Display During VCR Playback............................19
VCR PLAYBACK SCREEN DISPLAY CONTROL .........20
Split Screen Viewing.....................................................21
x2 Zoomed In Image Viewing .......................................21
Freezed Image Viewing................................................21
Full Screen Image Viewing...........................................22
Full Screen Sequential Viewing....................................22
VCR Recorded Picture and Camera Live Picture
Simultaneous Viewing ..................................................23
SPECIFICATIONS .......................................................24
FEATURES
•Settings entered by on-screen menus
Clock settings, Titles, Alarms, On-screen displays,
Recording mode, Alarm data
•Monitor 1 output screen
Split screen (divided in 16, 13, 10, 7, 4), full screen,
sequence display, 2 times zoom (with selectable
range), still image
•Monitor 2 output screen
Full screen, sequence display
•Camera title display (8 characters)
•Time display
•S-VIDEO output/input terminals (MPX-CD16P only)
ACCESSORIES
Power cord
DIN 25-pin assembled plug
DIN 25-pin plug components
Cover nut Locking screw E-rings
Plug plate Shielded cover A Shielded cover B
ENGLISH
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
2English

LOCATION OF CONTROLS AND INDICATORS
Front Panel
1 3 456789FG
H
2
1Power ON switch and indicator
2STAND BY indicator
This indicator will come on when the power cord is
connected in a live power outlet. It will go off when
the unit is turned on.
3Camera SELECT buttons and indicators
4Reset button
When this button is pressed, the unit is turned off
and the date and time are reset.
5PLUS1 (Monitor 2 image switching) button and
indicator
6STILL image button and indicator
7ZOOM button and indicator
8SEQUENCE select button and indicator
9MULTI (Screen splitting) button and indicator
FLIVE camera signal select button and indicator
GVCR signal select button and indicator
HMENU button
Press this button to display the main menu. Buttons
7, 8, 9, Fand Gare used for menu control (for
more information, please refer to page 7).
Resetting the menus
If the unit is moved, or to cancel all previously entered
settings, reset the menus as indicated below.
(1) Turn the unit off.
(2) Keep the MENU button pressed down, then press
the ON button.
•Reset the menus only if it is absolutely necessary.
Resetting the menus will erase the settings
previously entered, and will also affect the internal
clock.
Button Lock Function
This unit is equipped with a function that lets you lock
the buttons to prevent any undesired operation during
camera live mode or VCR playback mode. While the
Button lock function is engaged, a buzzer will sound
when one of the buttons corresponding to each lock
mode is pressed.
☞Button lock for camera mode
Press and hold the LIVE button then press the power
ON switch.
The ON, VCR and MENU buttons will be locked, and a
buzzer will sound if they are pressed.
☞Button lock for VCR playback mode
Press and hold the VCR button then press the power
ON switch.
The ON, LIVE and MENU buttons will be locked, and a
buzzer will sound if they are pressed.
☞To cancel the Button lock function
Press and hold the LIVE or VCR button then press
the power ON switch.
LIVE ON
VCR
ON MENU
VCR ON
LIVE
ON MENU
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
English 3

LOCATIONS OF CONTROLS AND INDICATORS
Back Panel
135678 1
I2HG42 9F
S-VIDEO
1Camera IN (Camera input) terminal
2Camera OUT (Camera output) terminal
3S-VIDEO IN (Input) terminal
4S-VIDEO OUT (Output) terminal
5VCR IN (Video cassette recorder input) terminal
6VCR OUT (Video cassette recorder output) terminal
7MONITOR OUT 1 (Monitor TV 1 output) terminal
8MONITOR OUT 2 (Monitor TV 2 output) terminal
9AL OUT (Alarm output) terminal
FCOM (Common) terminal
GSW IN (Switch input) terminal
HCONTROL terminal
IAC Power input
NOTE: Model MPX-MD16P does not have S-VIDEO IN,
OUT terminals.
(Control terminal)
No. Signal No. Signal
1Alarm input 1 14 Alarm input 14
2Alarm input 2 15 Alarm input 15
3Alarm input 3 16 Alarm input 16
4Alarm input 4 17 GND
5Alarm input 5 18 No operation
6Alarm input 6 19 No operation
7Alarm input 7 20 No operation
8Alarm input 8 21 GND
9Alarm input 9 22 No operation
10 Alarm input 10 23 GND
11 Alarm input 11 24 Remote control 1
input
12 Alarm input 12 25 Remote control 2
input
13 Alarm input 13
By connecting the remote control pins (24 and 25) of the
CONTROL terminal to a remote control circuit, remote
controlled operation of this unit is possible.
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
4English

CONNECTIONS
Signal flow
: VIDEO IN
: VIDEO OUT
: CAMERA IN
Monitor (sold separately)
Video input
connector Video input connector
Video cameras (sold separately)
To outlet
S-video
output
terminal
Video output terminal
Video input terminal
S-video
input
terminal
Timelapse VCR (sold separately)
Switch output terminal
COM terminal
Alarm input terminal
To pin 24 To pin 25
220 Ω
SW 1: Camera 1
220 Ω
SW 2: Camera 2
300 Ω
SW 3: Camera 3
360 Ω
SW 4: Camera 4
470 Ω
SW 5: Camera 5
680 Ω
SW 6: Camera 6
820 Ω
SW 7: Camera 7
1.2 kΩ
SW 8: Camera 8
1.8 kΩ
SW 9: Camera 9
2.2 kΩ
SW10: Camera 10
3.3 kΩ
SW11: Camera 11
4.7 kΩ
SW12: Camera 12
7.5 kΩ
SW13: Camera 13
13 kΩ
SW14: Camera 14
27 kΩ
SW15: Camera 15
68 kΩ
SW16: Camera 16
220 Ω
SW17: MENU
220 Ω
SW18: VCR
300 Ω
SW19: LIVE
360 Ω
SW20: MULTI
470 Ω
SW21: PLUS 1
680 Ω
SW22:
SEQUENCE
820 Ω
SW23: ZOOM
1.2 kΩ
SW24: STILL
1.8 kΩ
SW25: POWER
To pin 21
Remote controller circuit
To pin 23
To pin 17
Alarm sensor (door bell, interphone, etc.)
To pin 15
To pin 16
To pin 14
To pin 13
To pin 12
To pin 11
To pin 10
To pin 9
To pin 8
To pin 7
To pin 6
To pin 5
To pin 4
To pin 3
To pin 2
To pin 1
S-VIDEO
Before making any connection, make sure the power has been turned off on all the devices.
NOTES:
•If a connection is made to the S-VIDEO terminal, the (S-VIDEO) signal will have the priority.
•For detailed information, please refer to the manuals accompanying the other connected devices.
Make sure all the connections are correct, if not that may cause a fire and/or damages.
•Model MPX-MD16P does not have S-VIDEO IN, OUT terminals.
•With model MPX-MD16P, use black and white cameras only. If colour cameras are used, that may cause image
beat, etc.
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
English 5

ASSEMBLING THE DIN 25-PIN PLUG
1Preparing the cable
1Insert the cable in the cover nut (A), then
remove the cable sleeve as shown.
2Return the metallic shield mesh on the cable as
shown and cut it.
3For better shielding results, wrap about 20 mm
of copper or aluminium tape.
2Soldering the leads
Remove about 2 mm of sleeve from the end of each
leads. Apply solder on the extremity of the leads,
then solder them to the plug.
(For the pins number and signal, please refer to
page 4.)
3Installing the covers
1Insert plug plate (C) in the cover (B) slot. Check
that the shielding tape is within about 2 –3 mm
from the end of the cover (B). Push in the cover
(B) tabs.
2Align the cover (D) slot with the plug plate (C)
and push down until the clasps (E) interlock.
Tighten securely the cover nut (A) on the covers
threads.
3Insert the locking screws (F) in the holes, then
fix them by inserting the E-ring (G) between the
cover (D) and the plug plate. Bend the holder
(H) 2 or 3 times until it breaks off. Following the
same procedure, install the E-ring on the other
side.
4When the DIN plug is assembled, connect it to
the CONTROL terminal, then affix it using the
locking screws.
A
30 mm
10 mm
2 mm
2~3 mm
C
B
D
E
C
A
F
F
G
H
D
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
6English

ON-SCREEN MENUS
To display the main menu, or return to the main menu from a sub-menu, press the MENU button.
To select the different sub-menus, and enter the settings use the m, –, +, O, or «buttons. When a menu is
displayed, the indicators corresponding to the buttons that can be used with that particular menu will light.
Buttons functions Button m: To accept a setting.
Button –: To select in reverse order, numbers, letters, symbols. To switch
selectable settings.
Button + : To select in order, numbers, letters, symbols. To switch selectable
settings.
Button O: To move down.
Button «: To move the right.
Monitor 1 screen
Menu screen
* If a camera is not connected
to a camera input terminal,
the message “NO VIDEO”
will appear.
CLOCK SET menu
TITLE SET menu
ALARM SET menu
DISPLAY SET menu
VCR recording SET menu
ALARM DATA screen
Title input screen
Clock display location
selection screen
NOTES:
• When displaying the menus, start
with camera signals and VCR
playback signals displayed
together in a split screen, full
screen, or sequence display.
• The menus setup screens are
displayed on the monitor
connected to the MONITOR OUT 1
terminal.
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
English 7

CLOCK SETUP Menu 1
Setting
☞Example: To set the clock to October 15, 1997 at 15:20 PM.
1Press the MENU button, make sure “1. CLOCK SET”is selected, then press the MENU button again.
2Press the +(or –) button to set the day (15), then press the «button.
Following the same procedure, set the month (10), the year (97), the hours (15) and the minutes (20).
For accurate clock setting, press the –button together with a time broadcast signal or other accurate time signal,
then press the Obutton. The seconds will start counting from 00.
3Press the +(or –) button to set the “SUMMER TIME”to “STANDARD”or “SUMMER”, then press the Obutton.
4Press the MENU button, then press the Obutton to select “7. ENTER”and press the MENU button again.
Concerning the Clock Display
The clock is displayed as indicated below.
For more information on how to display the clock, please refer to “CLOCK, TITLE DISPLAY”on page 11.
Split screen
(16 divisions)
Split screen
(4 divisions)
Full screen
12 34
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
8English

TITLE SETUP Menu 2
Setting
☞Example: To set the title “GATE – – 5F”for the camera 5.
1Press the MENU button, then press the Obutton to select “2. TITLE SET”.
2Press the MENU button, then press the Obutton to select “5”and press the mbutton.
3Press the +(or –) button to set the first character “G”, then press the «button.
Following the same procedure, set the title “GATE – – 5F”, then press the mbutton.
4Press the MENU button, then press the Obutton to select “7. ENTER”and press the MENU button again.
Concerning the Title Display
The title is displayed as indicated below.
For more information on how to display the title, please refer to “CLOCK, TITLE DISPLAY”on page 11.
Split screen
(16 divisions)
Split screen
(4 divisions)
Full screen
12 34
L8FA5/XE (MPX-CD16P, MD16P GB) 1997. 12. 18
English 9