Sanyo PLC-EF60A User manual

Owner'sManual
PLC-XF60A
PLC-EF60A
MultimediaProjector
MODEL
✽ Projection lens is optional.

2
Features and Design
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector
utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
◆Compatibility
The projector widely accepts various video and computer
input signals including Analog and Digital Computer
sources, 6 TV color systems, Component video, S-video,
Digital video sources compatible with HDCP, and RGB
scart. (☞ p.36 and 37)
◆Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly. The projector
accepts signals up to UXGA resolution. (☞ p.38 and 70)
◆Convenient Fingertip Control Pad
The fingertip Control Pad on the remote control provides
you a remarkable flexibility and simplicity through the On-
Screen Menu navigation. (☞ p.14, 33, and 34)
◆Easy Menu Operation with USB Mouse
Your USB Mouse Controller can be used for the projector's
menu operation. (☞ p.25, 33, and 34)
◆Vertical and Horizontal Lens Shift and Memory
The projector is equipped with vertical and horizontal Lens
Shift and Lens Memory function, which enables you to
obtain optimum image easily under various setup
environments. (☞ p.29 and 53)
◆One-Touch Removable Filter and Filter LED
One-touch removable filter allows you an easy
maintenance and the orange lighting filter LED tells you the
best filter exchange timing. (☞ p.61)
◆My Logo
The projector enables you to customize the starting or
interval display for your presentation with its image
capturing function. (☞ p.50)
◆ My Menu Selection
My Menu function allows you to select menu items to be
displayed on screen. You can hide menus not in frequent
use and make your own menu display. (☞ p.49)
◆Customized Screen Setting
Fine aspect setting menu is prepared in the projector. You
can adjust screen scale and position exactly what you
want. (☞ p.47)
◆Shutter Function
The projector is equipped with the shutter that provides
complete blackness for a while the projected image is not
needed with keeping the projector on. The Shutter
management function allows you to set the timer. It
prevents leaving the projector on with the shutter closed
for a long time. (☞ p.29, 53, and 54)
◆Film Function
The Film function reproduces pictures faithful to the original
film quality from 2:3 and 2:2 pull-down video sources.
(☞ p.46)
◆Various Security Functions
The following security or anti-theft functions prevent others
except users from using the projector: Key Lock, PJ Lock,
and USB Lock. (☞ p.27, 54, and 55)
◆ Advanced Network Feature
Advanced Network feature available by installation of the
optional interface board enables various networking
operations including Network Capture, Network Viewer,
Network Communication, and Advanced Card Imager.
Contact the sales dealer where you purchase the projector
for the Advanced Network board. (☞ p.73)
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.
Remark
Any graphic and figure in this manual are subject to change without notice.

3
Table of Contents
FeaturesandDesign ...................2
TableofContents ......................3
To TheOwner .........................4
SafetyInstructions ....................5
Air Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Setup In Proper Directions . . . . . . . . . . . . . . . . . . . . .6
Moving the Projector . . . . . . . . . . . . . . . . . . . . . . . . .7
Caution in Handling the Projector . . . . . . . . . . . . . . . .7
Compliance ..........................8
Preparation ...........................9
Parts Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Top Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Remote Control Transmitter . . . . . . . . . . . . . . . . . . .16
Remote Control Channel and ID Setup . . . . . . . . . . .16
Remote Control Battery Installation . . . . . . . . . . . . .17
Installation ..........................18
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Lens Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Positioning the Projector . . . . . . . . . . . . . . . . . . . . . .18
Lens Shift Adjustment . . . . . . . . . . . . . . . . . . . . . . .19
Level Adjustable Feet . . . . . . . . . . . . . . . . . . . . . . . .19
Connecting AC Power Cord . . . . . . . . . . . . . . . . . . .20
Connection Terminals . . . . . . . . . . . . . . . . . . . . . . .21
Interface Board Slots . . . . . . . . . . . . . . . . . . . . . . . .21
Connecting to Computer
(Digital and Analog RGB) . . . . . . . . . . . . . . . . . . . . . .22
Connecting to Video Equipment
(Digital and Video) . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Connecting to Video Equipment
(Component and RGB Scart) . . . . . . . . . . . . . . . . . . .24
BasicOperation ......................25
Operating the Projector . . . . . . . . . . . . . . . . . . . . . .25
Basic Operation and Reference Buttons . . . . . . . . .26
Turning On the Projector . . . . . . . . . . . . . . . . . . . . .27
Turning Off the Projector . . . . . . . . . . . . . . . . . . . . .28
Lens Shift Adjustment . . . . . . . . . . . . . . . . . . . . . . .29
Zoom and Focus Adjustment . . . . . . . . . . . . . . . . . .29
Shutter Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Input Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Auto PC Adjustment . . . . . . . . . . . . . . . . . . . . . . . . .30
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Keystone Adjustment . . . . . . . . . . . . . . . . . . . . . . . .31
Screen Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Picture Freeze Function . . . . . . . . . . . . . . . . . . . . . .31
P-Timer Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
D. Zoom +/– Function . . . . . . . . . . . . . . . . . . . . . . . .32
How to Operate On-Screen Menu . . . . . . . . . . . . . .33
Menu Icons and Their Features . . . . . . . . . . . . . . . .35
Input ...............................36
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
System .............................38
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
PC System Selection 38
Video or S-Video Signal Selection 39
Component Signal Selection 39
ComputerAdjustment ................40
PC Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Auto PC Adjust 40
Manual PC Adjust 41
ImageAdjustment ....................43
Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
ScreenSetting .......................47
Screen Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Setting .............................49
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Special .............................57
Special . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
MaintenanceandCleaning .............60
Warning Temp Indicator . . . . . . . . . . . . . . . . . . . . . .60
Air Filter Replacement . . . . . . . . . . . . . . . . . . . . . . .61
Lamp Replacement . . . . . . . . . . . . . . . . . . . . . . . . . .62
Cleaning the Projection Lens . . . . . . . . . . . . . . . . . .64
Cleaning the Projector Cabinet . . . . . . . . . . . . . . . . .64
Attaching the Cord Cover Strap . . . . . . . . . . . . . . . .64
Indicators and Projector Condition . . . . . . . . . . . . . .65
Main Indicators 65
Shutter Indicator 66
Warning Filter Indicator 66
Lamp Replace Indicators 67
Appendix ...........................68
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Compatible Computer Specifications . . . . . . . . . . . .70
Technical Specifications . . . . . . . . . . . . . . . . . . . . . .72
Optional Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Terminal Configurations . . . . . . . . . . . . . . . . . . . . . .78
PIN Code Number Memo . . . . . . . . . . . . . . . . . . . . .79
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

4
To The Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICEPERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER’S MANUAL WITH
THIS UNIT.
CAUTION
RISKOFELECTRICSHOCK
DONOTOPEN
Before operating this projector, read this manual thoroughly
and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintain it in better condition for a
considerable time.
Improper operation may result in not only shortening the
product life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and try
the solutions in the “Troubleshooting” section in the end of
this booklet. If the problem still persists, contact the dealer
where you purchased the projector or the service center.
SafetyPrecaution
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TORAINORMOISTURE.
–This projector produces intense light from the projection
lens. Do not stare directly into the lens as much as
possible. Eye damage could result. Be especially careful
that children do not stare directly into the beam.
–Install the projector in a proper position. If not, it may result
in a fire hazard.
–Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector. Minimum clearances must be maintained. If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained. Do
not cover the ventilation slot on the projector. Heat build-up
can reduce the service life of your projector, and can also
be dangerous.
–If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
CAUTION
Not for use in a computer room as defined in the Standard for
the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Protection
of Electronic Computer/Data Processing Equipment.
NOTE: This symbol mark and recycle system are applied only
to EU countries and not applied to the countries in the
other area of the world.
Your SANYO product is designed and
manufactured with high quality
materials and components which can be
recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-of-
life, should be disposed of separately
from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
CAUTIONONHANGINGFROMTHECEILING
When hanging the projector from the ceiling,
clean the air intake vents, air filters, and top
of the projector periodically with a vacuum
cleaner. If you leave the projector without
cleaning for a long time, the dust will block
the operation of the cooling function, and it
may cause a breakdown or a disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKYCONDITIONSSUCHASINAKITCHENTOPREVENT
A BREAKDOWN OR A DISASTER. IF THE PROJECTOR
COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOMEDETERIORATED.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
3.3' (1m)
3.3' (1m) 3.3' (1m) 3.3' (1m)
SIDE and TOP REAR

5
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-
conditioning equipment.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
VoordeklanteninNederland
Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
NL

6
Safety Instructions
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects or spray can near the
projector. Hot air is exhausted from ventilation holes.
– Keep the exhaust vent at least 3.3’ (1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will become
hot while the projector is being used.
– Do not put anything on the cabinet. The materials put on
the cabinet will not only get damaged but also cause fire
hazard by heat.
Cooling fans are provided to cool down the projector. The
fan's running speed is chaged according to the temperature
inside the projector.
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
Do not tilt the projector more than 20
degrees from side to side.
In upward projection, do not tilt the
projector over 20 degrees right and
left.
Do not put the projector on either side
to project an image.
20˚
20˚
In downward projection, do not tilt the
projector over 20 degrees right and
left.
Use the projector properly in specified positions. Improper
positioning may reduce the lamp life and result in severe
accident or fire hazard.
This projector is allowed to project the picture in any position
of 360 degrees such as upward, downward, or backward as
below.
Bottom
Downward
(Usual) Front
Downward
Bottom
Upward
Front
Upward
Setup In Proper Directions
When installing the projector, avoid positioning it as described
below:
PositioningPrecautions
Air Circulation

7
Safety Instructions
USECAUTIONINCARRYINGOR
TRANSPORTINGTHEPROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
Carry the projector by two or more people by the carrying handle.
Carrying Handle
Caution in Handling the Projector
REMOVE LENS FROM THE PROJECTOR WHEN
CARRYING. OTHERWISE, IT MAY CAUSE SERIOUS
DAMAGE TO LENS AND THE PROJECTOR.
WHEN TRANSPORT OR STORE THE PROJECTOR
WITHOUT LENS, REPLACE THE LENS COVER
PLATE INITIALLY ATTACHED TO THE PROJECTOR.
TRANSPORTING OR STORING WITHOUT THE
LENS COVER PLATE MAY CAUSE DUST TO GET
INSIDE THE PROJECTOR AND RESULT IN
MALFUNCTION OF THE PROJECTOR OR DAMAGE
OF THE OPTICAL COMPONENTS INSIDE THE
PROJECTOR.
Retract the projector's adjustable feet and replace the lens cover
to protect the lens surface when moving the projector.
Disconnect all the cables from the projector before
moving the projector. Moving the projector with the
cables connected may cause damage to the projector
or result in serious injury.
Do not hold the terminal cover when lifting or moving the projector, or may cause damage to the terminal cover or result in
personal injury.
Do not hold the lens when lifting or moving the projector, or may cause damage to the lens and the projector.
Be sure to place the projector on a flat surface and that no object is under the projector. Placing on an uneven surface or any
object under the projector may cause damage to the projector's cabinet. Take particular note of the cabinet area around the
exhaust vent.

8
Compliance
FederalCommunicationCommissionNotice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes
or modifications should be made, you could be required to stop operation of the equipment.
CAUTION
This is a Class A equipment. This equipment can cause interference in residential areas; in this case, the operator can be
asked to take adequate countermeasures.
ACPowerCordfortheUnitedKingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the
fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is
detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible
on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow ············ Earth
Blue ································· Neutral
Brown ······························ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in
your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety
earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING:THISAPPARATUSMUSTBEEARTHED.
ASA
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
ACPowerCordfortheUnitedStatesandCanada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into
the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the
outlet, contact your electrician.
GROUND
THESOCKET-OUTLETSHOULDBEINSTALLEDNEARTHEEQUIPMENTANDEASILYACCESSIBLE.
ACPowerCordRequirement

9

10
Preparation
q w e r t y u
qLAMP1REPLACEindicator
Turns orange when the life of the projection Lamp 1
draws to an end. (p.62, 67)
wWARNINGTEMPindicator
Blinks red when the internal temperature of the
projector is abnormally high. (p.60, 65)
tREADYindicator
-Lights green when the projector is ready to be turned
on and remains green lighting during operations.
-Blinks green in the Power Management mode or when
the projector is shutdown due to a power failure.
(p.65~67)
Indicators
rLAMPindicator
- Lights red when the projector is in the stand-by mode.
- Turns a dim lighting when the projector is turned on.
(p.65~67)
eWARNINGFILTERindicator
Lights orange when the projector's filter is clogged with
dust. (p.61, 66) uLAMP2REPLACEindicator
Turns orange when the life of the projection Lamp 2
draws to an end. (p.62, 67)
ySHUTTERindicator
Lights blue when the shutter is closed. (p.66)

11
Preparation
Top Control
LENS SHIFT MENU
CANCEL
SELECT
ZOOM
FOCUS
SHUTTER
INPUT
INFORMATION
AUTO PC ADJ.
POWER
P
qwerty
oi
u
uINPUTbutton
Switches input sources. (p.30)
yAUTOPCADJ.button
Operates the Auto PC adjustment function. (p.30)
eCANCELbutton
Cancels the selection and returns to the previous menu.
tINFORMATIONbutton
Displays the projector information. (p.30)
wMENUbutton
Opens or closes the On-Screen Menu. (p.33, 34)
oPOWERON-OFFbutton
Turns the projector on or off. (p.27, 28)
iSHUTTERbutton
Closes and opens up the built-in shutter. (p29)
qLENSSHIFTbutton
Activates the Lens shift function. (p.29)
!0
!1
!2
!0 SELECTbutton
- Executes the item selected.
- Expand/compress the image in the Digital zoom +/–
mode. (p.32, 33)
!1 FOCUSbutton
Adjusts focus of the image. (p.29)
!2 ZOOMbutton
Adjusts zoom of the image. (p.29)
Preparation
rPointbuttons(e, d, 7,and 8)
- Navigate through the menu or adjust the value in the
On-Screen Menu.
-Pan the image in the Digital zoom + mode. (p.33, 34)

12
Preparation
ANALOG OUT
INPUT 3
INPUT 1
INPUT 2

13
Preparation

14
Preparation
Remote Control
MENU
CANCEL
INFO
AUTO PC
SCREEN
FREEZE
P-TIMERSOUND
REMOTE
VOL.
MUTE
CH
ID
LENS SHIFT
KEYSTONE
SHUTTER D.ZOOM
ZOOM FOCUS
ON-OFF
MENU
CANCEL
INFO
AUTO PC
SCREEN
FREEZE
P-TIMERSOUND
REMOTE
VOL.
MUTE
CH
ID
LENS SHIFT
KEYSTONE
SHUTTER D.ZOOM
ZOOM FOCUS
ON-OFF
q
w
u
i
e
r
y
!0
o
oZOOMbuttons
Adjust zoom of the image. (p.29)
rCONTROLPAD(semiconductivetouchpad)
- Selects an item or adjusts the value in the On-Screen
Menu.
- Pan the image in the Digital zoom + mode. (p.32)
wKEYSTONEbutton
Corrects keystone distortion. (p.31) uPOWERON-OFFbutton
Turns the projector on or off. (p.27, 28)
eLENSSHIFTbutton
Activates the LENS SHIFT function. (p.29) iFOCUSbuttons
Adjust focus of the image. (p.29)
tWIREDREMOTEJACK
Connect the Wired Remote Cable (not provided) to this
jack.
Battery installation is required regardless of it is used as
wired or wireless. (p.16, 25)
!0 SELECTbutton
Executes the item selected.
t
yD.ZOOMbutton
Activates the D.Zoom +/– function. (p.32)
qSHUTTERbutton
Closes the built-in shutter for light blocking. (p.29)
About Control Pad
The built-in Control Pad is a
semiconductive touchpad operated with
a light finger touch. Move your finger
up, down, right and left across the pad
to select the desired menu, adjust
values and operate various convenient
features. Refer to the following pages
for respective directions.

15
Preparation
!1 SCREENbutton
Selects screen sizes. (p.31)
!2 INPUT1-3buttons
Selects input source (INPUT 1 - INPUT 3). (p.30)
!0 AUTOPCbutton
Operates the Auto PC adjustment. (p.30)
qMENUbutton
Opens or closes the On-Screen Menu. (p.33, 34)
wFREEZEbutton
Freezes the projected picture. (p.31)
!4 REMOTERESET/ON/ALL-OFFswitch
When using the remote control, set this switch to “ON.”
Set it to “ALL OFF” for power saving when it is not
used. Slide this switch to “RESET” by holding down the
CH and ID buttons at the same time to initialize the
Remote Control ID and CH. (p.16)
uP-TIMERbutton
Operates P-Timer function. (p.31)
MENU
CANCEL
INFO
AUTO PC
SCREEN
FREEZE
P-TIMERSOUND
REMOTE
VOL.
MUTE
CH
ID
INPUT 4
INPUT 1
INPUT 2
INPUT 3INPUT 5
REMOTE RESET ON ALL OFF
LENS SHIFT
KEYSTONE
SHUTTER D.ZOOM
ZOOM FOCUS
ON-OFF
q
e
!0
!1
t
y
o
!3
i
r
u!4
w
!2
eand rbuttons are unusable.
tCHbutton
Switches Remote Control Channel (CH). (p.16)
yIDbutton
Switches Remote Control ID. (p.16)
iCANCELbutton
Cancels the selection and returns to the previous menu.
(p.33)
oINFObutton
Displays the projector information. (p.30)
!3 INPUT4-5buttons
Selects input source (INPUT 4 - INPUT 5). (p.30)
Preparation

16
Preparation
This wireless remote control uses radio frequency signal. You can switch four frequency channels prepared and select a
remote control ID from eight IDs. The Remote Control Channel selection prevents radio frequency interference from the
other equipment and the Remote Control ID selection allows you to operate several projectors with their respective remote
controls without mutual interference among those projectors.
WiredRemoteControlTransmitter
The remote control can be used as a wired remote control. When
interference between the projector and other equipment occurs or
the projector is used in a place where the operation of radio
equipment is restricted, connecting the remote control and the
projector with the wired remote cable (POA-CA-RC30) separatery
supplied is recommended. (p.73) Connected with the wired
remote cable, the remote control does not emit radio signal.
Remote Control Channel and ID Setup
Initial Remote Control Channel and ID are CH1 and ID1. When you
change the setting, set a Channel first, and then an ID.
Channel and ID settings for the remote control should be the
same as those for the projector. When changing the CH and ID
settings to the remote control, do it to the projector as well. Refer
to “Remote Control” in Setting menu on page 51.
Should you be lost at which CH and ID are currently set, initialize
the Channel and ID once, and set them again.
Hold down the CH button and press the SELECT button.
The Remote Control Channel switches sequentially for one
pressing the SELECT button. (See Table 1 on next page.)
Press and hold the CH and ID buttons, and slide the
REMOTE RESET/ON/ALL-OFF switch to REMOTE RESET,
and then to ON. The initial Channel and ID are CH1 and ID1.
(p.15)
1
MENU
MENU
CANCEL
INFO
AUTO PC
SCREEN
FREEZE
P-TIMERSOUND
REMOTE
VOL.
MUTE
CH
ID
INPUT 4
INPUT 1
INPUT 2
INPUT 3INPUT 5
REMOTE RESET ON ALL OFF
LENS SHIFT
KEYSTONE
SHUTTER D.ZOOM
ZOOM FOCUS
ON-OFF
While pressing the CH/ID
button, press the SELECT
button number of times
corresponding to the remote
control CH/ID.
MENU
CANCEL
INFO
AUTO PC
SCREEN
FREEZE
P-TIMERSOUND
REMOTE
VOL.
MUTE
CH
ID
LENS SHIFT
KEYSTONE
SHUTTER D.ZOOM
ZOOM FOCUS
ON-OFF
ID button
CH button
SELECT button
✔Note:
Remote Control Channel and ID cannot be initialized separately.
Set the Remote Control Channel
Set the Remote Control ID
2
Hold down the ID button and press the SELECT button. The
Remote Control ID switches sequentially for one pressing
the SELECT button. (See Table 2 on next page.)
Initialize the Remote Control Channel and ID
Remote Control Transmitter

17
Preparation
Remote Control Battery Installation
To insure safe operation, please observe the following precautions:
●Use (2) AA or LR6 type alkaline batteries.
●Always replace the batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture, or heat.
●Do not drop the remote control.
●If a battery has leaked on remote control, carefully wipe case clean and install new batteries.
●Risk of explosion if battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions.
Press the lid downward
and slide it.
Open the battery
compartment lid.
Install new batteries
into the compartment.
Replace the compartment
lid.
Two AA size alkaline
batteries
For correct polarity (+ and
–), be sure battery terminals
are in contact with pins in
the compartment.
12 3
✽ Default setting
ID 7
ID 8
Remote Control ID
ID 1 ✽
ID 2
ID 3
ID 4
ID 5
ID 6
Remote Control CH Radio Frequency
CH 1 ✽ 2.472 GHz
CH 2 2.403 GHz
CH 3 2.446 GHz
CH 4 2.421GHz
Channel switches sequentially for
one pressing the SELECT button.
ID switches sequentially for one
pressing the SELECT button.
Table1:RemoteControlChannel&Frequency
Table2:RemoteControlID
Preparation
CautionaboutRadioWave
The remote control operates in 2.4 GHz band, the same frequency band used for industrial, scientific, and medical
equipment (such as pacemaker), as well as amateur radio stations.
Before operating the remote control, make sure no electromagnetic interference occurs and pay attention to the
following cautions.
1. Be sure that there are no other devices in the area that may use the same frequency band as the remote
control.
2. If any other devices are causing radio interferences, change the communication frequency channel or
move to other location.
CautioninWirelessLANInterference
Under wireless LAN environment based on IEEE 802.11b and IEEE802.11g, the remote control may not operate
properly due to radio interferences. The remote control is initially set to use 2.472 GHz band (CH1) corresponding
to several channels of wireless LAN.
Should the remote control not operate properly due to radio interference, switch the communication frequency
channel to CH2. Yet the operating condition is not improved, try CH3 and CH4. In case of failure in every channel
operation, relocate other radio equipment using 2.4 GHz band away from the remote control and the projector.

18
Install the projector in a safe place. Before installation, read Safety
Instructions thoroughly and check the installation place. Install the
projector in a place with sufficient strength to support the
projector's weight. Installation on an unstable stand, cart, or ceiling
may cause serious injury or accidents.
Do not place the projector where is extremely hot and humid. Do
not place the projector where is dusty and smoky. When installing
the projector in dusty and smoky places or in a place for a long
period of time, installation with Smoke Resist Box (POA-SR-140)
separately supplied is recommended. (p.73)
When moving or setting up the projector, check the
followings again:
– Be sure that the lens is securely installed into the
projector.
– Be sure to replace Lens cap to protect lens
surface.
– Be careful not to hold or subject a lens to strong
forces. It may damage lens, cabinet, or
mechanical parts.
This projector is designed to project on a flat surface. Projector
should be perpendicular to the projection screen. Otherwise, the
projected image may be distorted. Keystone function allows you
to correct image distortions, but it should be considered that the
keystone correction may lower the image resolution. (p.31)
Do not expose the projection screen to direct sunlight or
excessive ambient lighting. The projected image may get white-
tinged due to reflection and the best image quality may not be
obtained.
SCREEN
Positioning the Projector
Before setting up the projector, install optional lens in the
projector. Install the lens following the instructions in the Lens
Installation Manual provided. Ask the sales dealer for detailed
information of optional lens specifications.
Do not move the projector with holding the lens mounted and its
peripheral part. It may cause serious damages to the projector and
the lens.
Lens Installation
Installation
Lens cap
Installation

19
Installation
Adjustable feet
Lens shift feature is provided to move the position of the projected image vertically by 50% and horizontally by 10%
respectively without any image distortion.
✽Lens shift range varies depending on lens and projectors. The range in this manual is the case of LNS-W04.
Level Adjustable Feet
This projector has four level adjustable feet. The projection angle
can be adjusted by rotating each foot. Adjust the four feet to
obtain best position of the projected image and make the projector
stable.
The projection angle is adjustable up to 3.65 degrees upward and
downward respectively by rotating front and back feet.
The projector can project image vertically and horizontally in the
range of 360 degrees. For proper installation, refer to “Setup In
Proper Directions” on page 6.
Projection angle is adjustable up to 3.65 degrees
upward and 3.65 degrees downward by adjusting front
and back feet.
3.65°
3.65°
Lens Shift Adjustment
Installation
50%
50%
10% 10%

20
To POWER CORD
CONNECTOR on a
projector.
Projectorside ACOutletside
Ground
NOTEONPOWERCORD
AC power cord must meet requirement of the country where you use the projector.
Confirm an AC plug type with the chart below and a proper AC power cord must be used.
If the supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
To the AC Outlet.
(120VAC)
ForContinentalEurope FortheU.S.A.andCanada FortheU.K.
To the AC Outlet.
(200-240VAC)
To the AC Outlet.
(200-240VAC)
Installation
Connecting AC Power Cord
This projector uses nominal input voltages of 120 V or 200-240 V
AC. This projector automatically selects correct input voltage. It is
designed to work with single-phase power systems having a
grounded neutral conductor. To reduce risk of electrical shock, do
not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of type of the power being supplied.
Connect the projector with all peripheral equipment before turning
it on. (Refer to pages 22~24 for connection.)
Connect the AC power cord (supplied)
to this socket. The AC outlet must be
near this equipment and must be
easily accessible.
Main On/Off switch
AC power socket
CAUTION
For safety, unplug the AC power cord when the projector is not
in use. When this projector is connected to an outlet with the
AC power cord and the Main On/Off switch is on, it is in stand-
by mode and consumes a little electric power.