Sanyo VCC-HD4000P User manual

FILE NO.
REFERENCE No.SM5310763
L5CL2/XE, XE-C1F, US, US-C1F (R)
NOTE: 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N.S.P. : Not available as service parts.
Design and specifications are subject to change without notice.
SERVICE MANUAL
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
PRODUCT SAFETY NOTICE
RoHS
This product does not contain any hazardous substances prohibited by the RoHS Directive.
WARNING
You are requested to use RoHS compliant parts for maintenance or repair.
You are requested to use lead-free solder.
(This product has been manufactured using lead-free solder. Be sure to follow the warning given on page 3 when carrying
out repair work.)
VCC-HD4000P
(Product Code : 117 405 00)
(Product Code : 117 455 00)
(Europe, U.K., Southeast Asia)
CONTENTS
1. SPECIFICATIONS .........................................4
2. DISASSEMBLY ..............................................5
3. ADJUSTMENT ...............................................8
4. PARTS LIST ................................................16
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ...........................C1
VCC-HD4000
(Product Code : 117 405 01)
(Product Code : 117 455 01)
(U.S.A., Canada, Taiwan, Brazil)

-2 -

-3 -
WARNING
Do not use solder containing lead.
This product has been manufactured using lead-free
solder in order to help preserve the environment.
Because of this, be sure to use lead-free solder when
carrying out repair work, and never use solder
containing lead.
Lead-free solder has a melting point that is 30 - 40°C (86 -
104°F) higher than solder containing lead, and moreover it
does not contain lead which attaches easily to other metals.
As a result, it does not melt as easily as solder containing
lead, and soldering will be more difficult even if the
temperature of the soldering iron is increased.
The extra difficulty in soldering means that soldering time
will increase and damage to the components or the circuit
board may easily occur.
Because of this, you should use a soldering iron and
solder that satisfy the following conditions when carrying out
repair work.
Soldering iron
Use a soldering iron which is 70 W or equivalent, and
which lets you adjust the tip temperature up to 450°C
(842°F). It should also have as good temperature recovery
characteristics as possible.
Set the temperature to 350°C (662°F) or less for chip
components, to 380°C (716°F) for lead wires and similar,
and to 420°C (788°F) when installing and removing shield
plates.
The tip of the soldering iron should have a C-cut shape or
a driver shape so that it can contact the circuit board as flat
or in a line as much as possible.
Solder
Use solder with the metal content and composition ratio by
weight given in the table below. Do not use solders which
do not meet these conditions.
Lead-free solder is available for purchase as a service tool.
Use the following part number when ordering:
Part name: Lead-free solder with resin (0.5 mm dia., 500 g)
Part number: VJ8-0270
Metal content Tin (Sn) Silver (Ag) Copper (Cu)
Composition
ratio by weight 96.5% 3.0% 0.5%
Note:
If replacing existing solder containing lead with lead-free
solder in the soldered parts of products that have been
manufactured up until now, remove all of the existing solder
at those parts before applying the lead-free solder.

-4 -
Television system : PAL color standards (VCC-HD4000P)
NTSC color standards (VCC-HD4000)
Lens : Image pickup device : 1/2.5” CMOS sensor
Effective pixels : 2,320 (H) x 1,728 (V), approx. 4.00 million pixels
Recording pixels : 2,288 (H) x 1,712 (V), approx. 3.92 million pixels
Lens : Focal length : f = 6.3 - 63.0 mm (Optical 10x)
F-number : F1.8 - 2.5
Electronic zoom : Max. x16 (max. x160 when combined with optical zoom)
Camera : Video size (H.264) : (16:9) HD 1920x1080p, HD 1280x720p, 960x540p, 640x360p, 320x180p
(4:3) 1080x864p, 720x576p, 360x288p (VCC-HD4000P)
(4:3) 1080x720p, 720x480p, 360x240p (VCC-HD4000)
Video size (JPEG) : (16:9) HD 1920x1080, HD 1280x720, 1024x576, 640x360
(4:3) 4M 2288x1712, 4M 1600x1200, 1280x960, 1024x768, 800x600, 640x480, 320x240
Synchronization method : Internal synchronization
Lowest image illumination : 2.0 lx (at F1.8, color, high gain, VGA)
0.1 lx (at F1.8, black and white, high gain, VGA)
Recording and playback : Picture quality : BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
Recording rate : JPEG/H.264 selectable
Recording mode : NORMAL/ALARM RECORDING : Timer recording
REC BUTTON RECORDING : Emergency recording
Backup recording in the event of a network recording failure
: NORMAL (at failure detection),ALARM (timer recording)
I/O : Video output : HD output : HDMI connector
SD output : BNC connector
LAN : 10BASE-T/100BASE-TX/1000BASE-TX (RJ-45 connector)
USB port : External hard disk case (2.5” HDD) supported
SD cade slot : 1 (SDHC, max. 32GB)
Alarm input : Control terminal 1/2 (NO or NC), also used for day/night switching input
Alarm output : Control terminal (NO/NC switching, 16V, 150mA, open collector)
External lens control : Zoom, Focus, Common (Voltage control : ±6 to ±12V)
Operation buttons : MENU, SET, RESET, cursor buttons (4)
Network : Image/video compression : H.264/JPEG
Picture quality : BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
Bandwidth : NO LIMIT or selectable
Interface : 10BASE-T/100BASE-TX/1000BASE-TX (PoE)
Protocol : TCP/IP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP, DDNS
Simultaneous access : 16
Security : BASIC authentication (ID/password),SSL supported
Others : Operating ambient temperature/humidity : -10 to +50°C, 90% RH or less (no condensation)
Power source : 24 V AC ± 10%, 50/60 Hz/ 12-15 V DC
Power consumption : 12.3 W
Weight : 710 g (25.1 oz)
Dimensions
1. SPECIFICATIONS

-5 -
1
3
1
3
2
22
2
4
5
5
55
4
External hard disk
case (option)
External hard disk
case (option)
4
4
11
10
12
21
18
19
8
16
9
15
14
13
25
22
24
23
26
27
17
17
7
6
20
2. DISASSEMBLY
2-1. REMOVAL OF COVER CABLE AND CABINET
6. Screw 2 x 4
7. Cap
8. Two screws 1.7 x 2.5
9. Door
10. Special screw
11. Two screws 3 x 6
12. Cabinet top
13. Special screw
14. Two screws 3 x 6
15. Cabinet bottom
16. Holder door
17. Hook
18. Cabinet front
19. Four screws 3 x 6
20. Dec window power
21. Dec front + Dec lens
22. Screw 3 x 6
23. Screw 3 x 6
24. Screw 3 x 10
25. Screw 2 x 4
26. Dec back
27. Remove the solder
1. Screw 3 x 6
2. Four hooks
3. Cover cable
4. Screw 3 x 6
5. Holder c-cover

-6 -
1
4
218
19 20
3
5
13
14
11
12
15
16
17
A
C
D
B
ac
b
d
2-2. REMOVAL OF CA-4 BOARD, CA-7 BOARD AND MOTOR FAN DC
CN258
CN541
CN257
CN259
CA-4 Board
SIDE B
7
6
CN952
CN306
CN304
CA-2 Board
SIDE B
8
9
10
1. Four screws 2 x 4
When assembling,
tighten the screws order.
A D
2. Holder top
3. Four screws 2 x 4
When assembling,
tighten the screws order.
a d
4. CA-4 board
5. Connector
6. Connector CN258 (-CN202)
7. Connector CN541 (-CN601)
8. Connector CN952 (-motor)
9. Connector CN306 (-CA-7)
10. Connector CN304 (-fan)
11. Two screws 2 x 4
12. Cover SD + Dec SD + Dec button
13. Four screws 3 x 6
14. Cover fan
15. Four screws 3 x 14
16. Motor fan DC
17. Holder fan
18. Two screws 2 x 4
19. CA-7 board
20. Assy wire (CN681)

-7 -
19
22
18
3
17
13
14
14
10
7
12
21
16
2
9
1
11
8
15
6
4
5A
E
C
D
BF
b
a
c
d
20
1. Six screws 2 x 4
When assembling,
tighten the screws order.
A F
2. Holder bottom
3. Four screws 2 x 4
When assembling,
tighten the screws order.
a d
4. Connector CN951 (-lens FPC)
5. Connector (CA-3)
6. Connector (CN404)
7. CA-2 board
8. Assy wire (CN601)
9. Assy wire (CN202)
10. Screw 3 x 12
11. Screw 3 x 10
12. CA-3 board
13. Terminal
14. Four screws 2 x 4
2-3. REMOVAL OF CA-2 BOARD, CA-3 BOARD AND BOARD LOCATION
CA-4 board
CA-7 board
CA-1 board
CA-2 board
CA-3 board
15. Chassis base
16. Spacer FPC
17. Two screws 2 x 3
18. Two screws 2 x 3
19. Chassis LSL
20. Chassis LSR
21. Hood DN
22. Assy lens

-8 -
3. ELECTRICAL ADJUSTMENT
3-1. Table for Servicing Tools
Download the calibration software and the firmware
from the following URL.
http://www.digital-sanyo.com/overseas/service/
Place the DscCalDi.exe file, camapi32.dll file and
QrCodeInfo.dll file together into a folder of your
choice.
The version of calibration software should use 1.61b
or subsequent ones.
3-2. Equipment
1. PC (IBM® -compatible PC, Pentium processor, Window
2000 or XP)
2. Frequency counter
3.Monitor TV
3-3. Adjustment Items and Order
1. Timer Quartz Adjustment
2. Lens Adjustment (Infinity)
3. Lens Adjustment (1m)
4. Privacy Masking Adjustment
5. AWB Adjustment
6. CCD White Point Defect Detect Adjustment
7. CCD Black Point And White Point Defect Detect Adjust-
ment In Lighted
Note: If the lens, CCD and board and changing the part, it is
necessary to adjust again. Item 1-7 adjustments should be
carried out in sequence.
3-4. Setup
1. System requirements
Windows 2000 or XP
IBM®-compatible PC with pentium processor
USB port
40 MB RAM
Hard disk drive with at least 15 MB available
VGA or SVGA monitor with at least 256-color display
2. Pattern box
Turn on the switch and wait for 30 minutes for aging to take
place before using Color Pure. It is used after adjusting the
chroma meter (VJ8-0192) adjust color temperature to 3100 ±
20 K and luminosity to 900 ± 20 cd/m2. Be careful of handling
the lump and its circumference are high temperature during
use and after power off for a while.
3. Computer screen during adjustment
3-5 Connecting the camera to the computer
Chang the camera for the device mode according to the
procedure as follows when connecting it with “COM-
PUTER” and adjusting, and inspecting it.
1. It becomes a device mode if it turns on power while
pushing a top and bottom of the operation paner key at
the same time.
2. Confirm that LED of the front panel blinks.
3. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
Device mode is reset when turning off power.
Ref. No. Name Part code
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
Number
1
1
1
1
1
1
1
1
J-1 J-3
J-4
VJ8-0190
VJ8-0192
VJ8-0191
VJ8-0260
VJ8-0282
Pattern box
Calibrationsoftware
Chroma meter
Spare lump
Collimator
Spare lump (collimator)
Siemens star chart
USB “A” to “A” cable
Firmware
QrCode
AWB
Focus
UV Matrix
R Bright
RGB Offset
Tint
B Bright
Gain
Phase
LCD
Calibration Upload
Initialize
LCD Type H AFC Test
VCOMDC
VCOMPP
Cal Data
Cal Mode
OK
OK
EVF
USB storage
Get
Set
VID Set
PID Set
Serial Set
Rev. Set
Setting
Language
Video Mode
VCO
Factory Code
Backrush pulse :
Set
Get
J-8

-9 -
3-6. Adjust Specifications
1. Timer Quartz Adjustment
Preparation:
Temperature : 25 ± 5 °C
Start to adjust after one minute from turn on the power.
Adjustment method:
1. Connect the frequency counter to the TP301.
2. Adjust the trimmer (CT301) so that the adjustment
values becomes standard values.
Standard values : 2.048035 KHz - 2.048049KHz
2. Lens Adjustment
Preparation:
POWER switch: ON
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
Adjustment method:
1. Set the camera 0 cm from the collimator. (Do not enter any
light.)
2. Set the camera so that it becomes center of the screen in
the collimator.
3. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
4. Double-click on the DscCalDi.exe.
5. Click the “QrCode”.
6. QrCode Input Dialog display will be displayed.
7. Deselect Bar code Input.
8. Enter the alphanumeric characters which are underneath
the bar code which is included with the lens.
9. Click the Execute.
10. Status: Production adjustment end! will be displayed, and
click the OK.
11. Select “Infinity Cal.” on the LCD “Test”, and click the “Yes”.
12. Lens infinity adjustment value will appear on the screen.
13. Click the OK.
14. Device mode is canceled.
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_I_WIDE: ZIW
ZIW: infinity adjustment value of focus at zoom position
wide (-126<=ZIW<=110)
AF_I_MID1: ZIM1
ZIM1: infinity adjustment value of focus at zoom position
middle1 (-138<=ZIM1<=121)
AF_I_MID2: ZIM2
ZIM2: infinity adjustment value of focus at zoom position
middle2 (-132<=ZIM2<=114)
AF_I_MID3: ZIM3
ZIM3: infinity adjustment value of focus at zoom position
middle3 (-128<=ZIM3<=109)
Camera Collimator
Dsc Calibration x
OK
Infinity calibration :
AF_I_WIDE: 9
AF_I_MID1: 11
AF_I_MID2: 15
AF_I_MID3: 18
AF_I_MID4: 13
AF_I_MID5: 7
AF_I_MID6: -2
AF_I_TELE: -7
QR_Z_WIDE: -87
QR_F_I_WIDE: 111
QR_F_I_TELE: -317
QR_Z_AORI: -87
QR_F_I_AORI: 111
Copy

-10 -
AF_I_MID4: ZIM4
ZIM4: infinity adjustment value of focus at zoom position
middle4 (-165<=ZIM4<=141)
AF_I_MID5: ZIM5
ZIM5: infinity adjustment value of focus at zoom position
middle5 (-232<=ZIM5<=200)
AF_I_MID6: ZIM6
ZIM6: infinity adjustment value of focus at zoom position
middle6 (-280<=ZIM6<=242)
AF_I_TELE: ZIT
ZIT: infinity adjustment value of focus at zoom position
tele (-230<=ZIT<=224)
QR_Z_WIDE: QRZW
QRZW: adjustment value of zoom written on QR code
(-102<=QRZW<=-75)
QR_F_I_WIDE: QRFW
QRFW: adjustment value of focus position wide written on
QR code (-63<=QRZW<=261)
3. LensAdjustment (1m)
Preparation:
POWER switch: ON
Adjustment condition:
Siemens star chart (A3)
Fluorescent light illumination with no flicker (incandescent light
cannot be used.)
Illumination above the subject should be 700 lux ± 10%.
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
Adjustment method:
1. Set the siemens star chart 100 ± 0.5 cm from lens surface
(zoom wide position) so that it becomes center of the
screen (zoom wide and tele). Set the camera and the chart
in a straight, and do not put optical systems (mirror and
conversion lens etc.)
2.Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
Camera
(zoom wide)
100 0.5 cm
Siemens
star chart
3. Double-click on the DscCalDi.exe.
4. Click the “Focus”, and Click the “Yes”.
5. Lens adjustment value will appear on the screen.
6. Click the OK.
7. Device mode is canceled.
DscCalDi x
OK
Focus Result
AF_TEMP_AD: 445
AF_WIDE: 9
AF_MID1: 11
AF_MID2: 15
AF_MID3: 25
AF_MID4: 26
AF_MID5: 24
AF_MID6: 19
AF_TELE: 17
!
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_TEMP_AD: ATAD
ZW: adjustment value of focus temperatureA/D
(0<=ATAD<=1023)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(-126<=ZW<=110)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(-138<=ZM1<=121)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(-132<=ZM2<=114)
AF_MID3: ZM3
ZM3: adjustment value of focus at zoom position middle3
(-123<=ZM3<=104)
AF_MID4: ZM4
ZM4: adjustment value of focus at zoom position middle4
(-147<=ZM4<=115)
AF_MID5: ZM5
ZM5: adjustment value of focus at zoom position middle5
(-173<=ZM5<=148)
AF_MID6: ZM6
ZM6: adjustment value of focus at zoom position middle6
(-180<=ZM6<=163)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(-188<=ZT<=174)

-11 -
4. Privacy Masking Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Set the camera unit lens 10 ± 5 mm from the collimator.
(Do not enter any light.)
2. Set the camera so that it becomes center of the screen in
the collimator.(Tele side)
3. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
4. Double-click on the DscCalDi.exe.
5. Select “Privacy Mode” on the LCD “Test”.
6. Select “Privacy Mode” on the LCD “Privacy mask”.
7. “Wide” is click and it is made a wide side.
8. From the center of a privacy masking chart, masking
area is adjusted by "Left" and "Right" so that left and
right may become equal, and the upper and lower sides
may become equal by "Up" and "Down".
9. “Tele” is click and it is made a tele side.
10. Ceck that there is an even amount of space between
the masking area on the TELE screen and the top,
bottom, left and right edges of the monitor screen.
If there is a large amount of difference in the spaces, re-
adjust.
Camera Collimator
10 5 mm
Down
Up
Right
Left
Privacy Mode
Privacy mask
Tele
Wide
OK

-12 -
5.AWBAdjustment
Preparation:
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m2)
Adjusting method:
1. When setting the camera in place, set it to an angle so
that nothing appears in any part of the color viewer
except the white section. (Do not enter any light.)
2. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
3. Double-click on the DscCalDi.exe.
4. Click the AWB, and click the Yes.
5. AWB adjustment value will appear on the screen.
6. Click the OK.
Adjustment value determination is effectuated using the
"AGC", “CHECK", “CHECK_ND”, “IRIS_GAIN”,
“IRIS_OFFSET”, "MS", “MS_M”, “MS_C”, “MS_C2”,
“MS_C3”, “IRIS_PWM1”, “IRIS_PWM2”, “IRIS_PWM3” and
“IRIS_PWM4” values. If
AGC= a1
CHECK= wc0, wc1, wc2
CHECK_ND= wnc0, wnc1, wnc2
IRIS_GAIN= g,
IRIS_OFFSET= o,
MS= ms1, ms2,
MS_M= ms3, ms4,
MS_C= ms5, ms6,
MS_C2= ms7, ms8,
MS_C3= ms9
IRIS_PWM1= s1, s2
IRIS_PWM2= s3, s4
IRIS_PWM3= s5, s6
IRIS_PWM4= s7
the adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
a1<=2610
wc0=128 ± 2, wc1=128 ± 2, wc2<=255
wnc0=128 ± 2, wnc1=128 ± 2, wnc2<=255
0<=g<=255
0<=o<=255
3100<ms1<4500, 600<ms2<2000, 2771<ms3<4171,
2044<ms4<3444, 1592<ms5<2992, 1109<ms6<2509,
1000<ms7<2400, 829<ms8<2229, 676<ms9<2076
0<=s1<=255, 0<=s2<=255, 0<=s3<=255, 0<=s4<=255,
0<=s5<=255, 0<=s6<=255, 0<=s7<=255
s1>s2>s3>s4>s5>s6>s7
Adjustment values other than the above are irrelevant.
6. CCD White Point Defect Detect Adjustment
Adjustment method:
1. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
2. Double-click on the DscCalDi.exe.
3. Select “CCD Defect” on the LCD “Test”, and click the “Yes”.
4. After the adjustment is completed, OK will display.
5. Click the OK.
Camera Pattern box
Dsc Calibration x
OK
AWB Results:
1:
AGC=2466
WB=205,511,647
CHECK=127,128,124
WB_ND=204,511,651
CHECK_ND=127,128,123
IRIS_GAIN: 62
IRIS_OFFSET: 158
IRIS_PWM1=198,152
IRIS_PWM2=137,123
IRIS_PWM3=112,109
IRIS_PWM4=105
MS=3877,1219
MS_M=3107,2447
MS_C=2134,1699
MS_C2=1530,1412
MS_C3=1280
Copy
When all of the AWB adjustment screen
is not displayed, use a scroll bar.

-13 -
7. CCD Black Point And White Point Defect Detect
Adjustment In Lighted
Preparation:
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m2)
Adjusting method:
1. Set the camera 0 cm from the pattern box. (Do not enter
any light.)
2. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
3. Double-click on the DscCalDi.exe.
4. Select “CCD Black” on the LCD “Test”, and click the “Yes”.
5. After the adjustment is completed, the number of defect
will appear.
6. Click the OK.
Camera Pattern box
3-7. The Compulsive boot starting method
1. Keep MENU button and downward arrow button de-
pressed while switching on the power.
2. Connect the camera and the computer with USB cable.
3-8. USB STORAGE INFORMATION REGISTRATION
USB storage data is important for when the camera is con-
nected to a computer via a USB connection.
If there are any errors in the USB storage data, or if it has not
been saved, the USB specification conditions will not be sat-
isfied, so always check and save the USB storage data.
Adjustment method:
1. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
2. Double-click on the DscCalDi.exe.
3. Click on the Get button in the USB storage window and
check the USB storage data.
VID: 0x0474
PID: 0x02C7
Serial:
Rev. : 1.00
4. Check the “Serial” in the above USB storage data. If the
displayed value is different from the serial number printed
on the base of the camera, enter the number on the base
of the camera. Then click the Set button.
5. Next, check VID, PID and Rev. entries in the USB storage
data. If any of them are different from the values in 3. above,
make the changes and then click the corresponding Set
button.
Firmware
QrCode
AWB
Focus
UV Matrix
R Bright
RGB Offset
Tint
B Bright
Gain
Phase
LCD
Calibration Upload
Initialize
LCD Type H AFC Test
VCOMDC
VCOMPP
Cal Data
Cal Mode
OK
OK
EVF
USB storage
Get
Set
VID Set
PID Set
Serial Set
Rev. Set
Setting
Language
Video Mode
VCO
Factory Code
Backrush pulse :
Set
Get

-14 -
3-9. Firmware uploading procedure
1. Overwriting firmware from the SD card
Preparation:
SD card: SD card with firmware rewritten into the root direc-
tory
Data: CL2xxxxx.BIN (xxxxx: version)
Overwriting method:
1. Insert the above SD card.
2. Turn on the camera.
3. Set the REC/PLAY switch to the PLAY.
4. Press the MENU button.
5. Choose the Option menu.
6. Choose the FORMAT.
7. Toggle the SET button to the left for 2 seconds. FIRM WARE
UPDATE will display.
8. Choose YES.
9. Press the SET button. Update is starting.
Note:
Do not turn off the camera’s power or remove the SD card
while the firmware is being updated.
The power will turn on automatically after the update is com-
plete.
2. Overwriting firmware from the calibration software
Preparation:
PC with overwriting firmware copied to the preferred folder in
the HD.
Data: CL2xxxxx.BIN (xxxxx: version)
Overwriting method:
1. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
2. Double-click on the DscCalDi.exe.
3. Click the Firmware.
4. Choose the fimware file to use for overwriting, and click
the Yes.
5. Update is starting. The message will appear, and choose
OK.
6. After the update is complete, disconnect the USB cable
and turn the camera’s power off.
Note:
Do not turn off the camera’s power while the firmware is be-
ing updated.

-15 -
MEMO

16
4. PARTS LIST (R)
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
ACCESSORIES & PACKING MATERIALS
9110 613 216 4733 INST MANUAL,SETUP A5,English,French,
Spanish,German,Chinese (Simplified)
9111 613 216 4740 INST MANUAL,MENU GB/F A5,English,French
9112 613 216 4757 INST MANUAL,MENU D/CS A5,
German, Chinese (Simplified)
9113 613 218 1228 INST MANUAL,COVER A6,COVER CABLE ,
English
9204 613 217 8945 COVER,CABLE-L5CL2
9205 613 216 5266 HOLDER,C-COVER-L5CL2
NJ900 411 097 9409 SCR PAN PCS 2X4 ,DOOR
NJ901 411 191 9404 SCR PAN 3X6 ,COVER CABLE
7001 613 217 7542 CARTON CASE INNER
7002 613 184 1659 CUSHION BAG,SET COVER
7003 613 203 8522 LABEL RECYCLE,VCC-HD4000P ONLY
7004 613 216 6928 REINFORCEMENT,PAD-A, BOTTOM
7005 613 216 6935 REINFORCEMENT,PAD-B, TOP
7006 613 216 5945 CUSHION,TOP
7007 613 218 1716 CUSHION BAG,COVER CABLE
CABINET & CHASSIS PARTS
5001 613 216 2623 CABINET,TOP-L5CL2
5002 613 216 5181 CABINET,BOTTOM-L5CL2
5008 613 218 3956 LABEL,UL-L5CL2/US-C1F,VCC-HD4000 ONLY
5101 613 216 5495 CABINET,FRONT-L5CL2
5200 613 216 6089 ASSY,DEC,FRONT
5102 613 216 5570 DEC,WINDOW,POWER-L5CL2
6001 613 216 5204 CHASSIS,BASE-L5CL2
6002 613 216 5211 CHASSIS,LSL-L5CL2
6003 613 216 5228 CHASSIS,LSR-L5CL2
6007 613 216 5259 HOLDER,FAN-L5CL2
6008 613 216 5600 COVER,FAN-L5CL2
6009 613 216 5235 HOLDER,TOP-L5CL2
6010 613 216 5242 HOLDER,BOTTOM-L5CL2
6011 613 216 5594 COVER,SD-L5CL2
6012 613 216 6027 DEC,BUTTON-L5CL2
6013 613 216 5587 DOOR-L5CL2
6014 613 216 6058 HOLDER ,DOOR-L5CL2
6015 613 216 5198 DEC,BACK-L5CL2/XE
6016 613 216 6096 CAP-L5CL2
6018 613 217 3162 DEC,SD-L5CL2
8000 636 121 8436 ASSY,FPC CA1 SV-L5CL2
8001 645 096 4596 MOTOR,FAN DC 0.50W
CA2 613 215 8985 COMPL PWB,CA-2 F/W
CA3 613 215 8886 COMPL PWB,CA-3
CA4 613 215 8916 COMPL PWB,CA-4
CA7 613 215 8978 COMPL PWB,CA-7
CN511 645 097 0313 TERMINAL,PWB 2P
NJ501 412 077 8504 SPECIAL SCREW-3X6
NJ502 412 077 8504 SPECIAL SCREW-3X6
NJ503 312 061 6106 SPECIAL SCREW
NJ504 312 061 6106 SPECIAL SCREW
NJ510 411 191 1804 SCR S-TPG BIN 2X6
NJ600 411 030 5406 SCR BIN 2X4
NJ601 411 030 5406 SCR BIN 2X4
NJ603 411 191 9404 SCR PAN 3X6
NJ604 411 192 0301 SCR PAN+SW 3X10
NJ605 312 060 4103 SPECIAL SCREW-3X12
NJ606 411 191 8506 SCR L-TPG PAN 3X10
NJ608 411 191 9404 SCR PAN 3X6
NJ609 411 192 1407 SCR BIN 2X3
NJ610 411 030 5406 SCR BIN 2X4
NJ611 411 030 5406 SCR BIN 2X4
NJ612 411 030 5406 SCR BIN 2X4
NJ613 411 030 5406 SCR BIN 2X4
NJ614 411 191 9404 SCR PAN 3X6
NJ615 411 192 0509 SCR PAN 3X14Z
NJ616 411 030 5406 SCR BIN 2X4
NJ617 411 177 8100 SCR S-TPG PAN PCS 1.7X2.5
NJ618 411 097 9409 SCR PAN PCS 2X4

17
L5CL2/XE(MS)
A
5101
6002
CA7
8000
6012
6018
6007
6011
5002
6013
6010
CN511
6001
8001
5200
CA3
CA2
6015
6008
CA4
6009
5001
NJ609
NJ611
NJ502
NJ502
NJ504
NJ600
NJ600
NJ604
NJ605
NJ616
NJ603
NJ608
NJ606
NJ614
NJ601
NJ612
NJ503 NJ501
NJ510
NJ609
NJ613
NJ618
NJ610
NJ617
6014
NJ615
NJ610
5008
6016
6003
B
A
B
5102

18
ELECTRICAL PARTS
Note:
1. Materials of Capacitors and Resistors are abbreviated as follows ;
Resistors Capacitors
MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor
MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor
OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor
AL-SOLID Aluminum Solid Capacitor
NP-ELECT Non-Polarized Electrolytic Capacitor
OS-SOLID Aluminum Solid Capacitors with Organic
Semiconductive Electrolytic Capacitor
DL-ELECT Double Layered Electrolytic Capacitor
POS-SOLID Polymerized Organic Semiconductor Capacitor
2. Tolerance of Capacitor (10pF over) and Resistor are noted with follow symboles.
F ............1% G ............2% J ............5% K ............10%
M ..........20% N ..........30% Z ..........+80% ~ -20%
3. Capacitors
U : µF P : pF
4. Inductors
UH : µH MH : mH
5. N.S.P. : Not available as service parts.
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
COMPL PWB,CA-2 F/W
613 215 8985
(BATTERY)
Z3001 645 098 0015 BATTERY,RECHARGE
(VARISTORS)
VA201 308 053 2003 VARISTOR AVRL101A3R3FT
VA202 308 053 2003 VARISTOR AVRL101A3R3FT
VA203 308 050 0507 VARISTOR AVR-M1005C080MT
(SEMICONDUCTORS)
Q1002 405 218 3902 TR UP0431300
OR 305 167 0406 TR EMD12
Q1403 405 218 3902 TR UP0431300
OR 305 167 0406 TR EMD12
Q2003 405 218 3902 TR UP0431300
OR 305 167 0406 TR EMD12
Q2004 305 137 2003 TR 2SA1576A-R
OR 305 102 5503 TR 2SB1218A-R
Q2005 305 137 2003 TR 2SA1576A-R
OR 305 102 5503 TR 2SB1218A-R
Q2006 305 131 0203 TR DTC144EUA
Q3001 305 137 2003 TR 2SA1576A-R
OR 305 102 5503 TR 2SB1218A-R
Q3003 305 137 2003 TR 2SA1576A-R
OR 305 102 5503 TR 2SB1218A-R
Q3004 305 186 7301 TR UP04213 00
OR 305 181 1205 TR NSBC144EDXV6T5
OR 305 173 4009 TR PEMH2
OR 305 166 9509 TR EMH2
Q3006 305 138 6703 TR DTC144EKA
Q4001 305 138 6703 TR DTC144EKA
Q4002 305 138 6703 TR DTC144EKA
Q5801 305 115 6900 TR DTC114EE
(INTEGRATED CIRCUITS)
IC101 409 686 1903 IC EV2MA (B.G.A. ) (N.S.P)
OR 409 692 9702 IC EV2MB (B.G.A. ) (N.S.P)
IC102 410 671 3802 IC K4X51323PG-8GC8 (B.G.A. ) (N.S.P)
IC103 410 671 3802 IC K4X51323PG-8GC8 (B.G.A. ) (N.S.P)
IC106 410 657 3109 IC TC7MP3245FTG(EB,A)
IC108 310 517 3600 IC TC74LCX138FT
IC111 410 645 5009 IC PL611S-26-777TCR
IC121 409 697 4603 IC HDC MAIN V1.00-02 JPN (B.G.A. ) (N.S.P)
IC201 409 679 9008 IC XC9215C33CD
IC202 409 680 8205 IC XC9215C18CD
IC204 309 540 4708 IC TC7WH125FK
IC205 309 540 4708 IC TC7WH125FK
IC207 410 649 2608 IC TDA9981BHL-8-C1-557
IC209 409 685 1409 IC GTL2002DC
IC210 309 669 5105 IC BA7664AFV
IC301 410 619 9804 IC LC87F2832AUFL68TBM-E (B.G.A. ) (N.S.P)
IC302 309 585 7504 IC BD5226G-TR
IC303 409 684 6801 IC XC61GN2502H-
IC304 409 678 3908 IC TK70635HCL-G
IC401 410 640 8005 IC S1R72V17B00A200 (B.G.A. ) (N.S.P)
IC402 410 664 0009 IC MIC2015-1.2YML
IC403 309 488 5805 IC TC7WH32FK
IC404 309 594 1609 IC SRV05-4TCT
IC405 309 652 0001 IC BA2903FV
IC581 409 689 2709 IC XC9235A18CE
IC582 409 694 6105 IC LTC3568EDD
IC583 409 689 2709 IC XC9235A18CE
IC584 409 677 2803 IC NJM2877F3-03
IC585 409 689 2709 IC XC9235A18CE
IC601 409 691 1509 IC LAN9211
IC602 309 507 3805 IC NC7SZ32P5
IC951 409 680 0506 IC BU2233GU (B.G.A. ) (N.S.P)
IC971 309 646 8709 IC AK7331
IC981 309 577 8304 IC LB1906CL-E
(DIODES)
D3001 307 232 6009 DIODE SB05-05C-E
D3002 307 201 7600 LED SML-310MT
D3003 307 201 7600 LED SML-310MT
D6001 307 241 6601 ZENER DIODE RSB6.8G
D6002 307 241 6601 ZENER DIODE RSB6.8G
D9501 408 064 9807 DIODE XBS104S13-R
D9502 408 064 9807 DIODE XBS104S13-R
D9503 408 064 9807 DIODE XBS104S13-R
(OSCILLATORS)
X1102 645 069 4967 OSC,CRYSTAL 48.00000MHZ
X3001 913 109 0973 OSC,CRYSTAL 32KHZ
X3002 945 046 1416 OSC,CERAMIC 4.00MHZ
X6001 645 097 1921 OSC,CRYSTAL 25MHZ
(INDUCTORS)
L1001 945 053 2666 IMPEDANCE,10 OHM P
L1006 945 059 8112 IMPEDANCE,1000 OHM P
L1007 945 059 8112 IMPEDANCE,1000 OHM P
L1401 645 094 0521 IMPEDANCE,33 OHM P
L1402 645 094 0521 IMPEDANCE,33 OHM P
L1403 645 094 0521 IMPEDANCE,33 OHM P
L2001 645 084 1231 INDUCTOR,4.7U N
L2002 645 084 1231 INDUCTOR,4.7U N
L2003 945 053 2666 IMPEDANCE,10 OHM P
L2004 945 059 8211 IMPEDANCE,600 OHM P
L2005 945 059 8211 IMPEDANCE,600 OHM P
L2006 945 059 8211 IMPEDANCE,600 OHM P
L2009 945 059 8112 IMPEDANCE,1000 OHM P
L2010 945 059 8112 IMPEDANCE,1000 OHM P
L2011 945 059 8112 IMPEDANCE,1000 OHM P
L2015 645 090 9719 IMPEDANCE,90 OHM M
L2016 645 090 9719 IMPEDANCE,90 OHM M
L2017 645 069 5278 INDUCTOR,18U J
L2018 645 068 8997 INDUCTOR,33U J
L2019 645 069 5278 INDUCTOR,18U J
L2020 645 068 9000 INDUCTOR,10U K
L4001 645 059 7596 IMPEDANCE,90 OHM P
L5801 645 084 1231 INDUCTOR,4.7U N

19
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
C2024 303 429 3202 CERAMIC 22U M 6.3V
C2026 303 298 9602 CERAMIC 0.1U K 16V
C2027 303 298 9602 CERAMIC 0.1U K 16V
C2032 303 343 3104 CERAMIC 1U K 6.3V
C2033 303 343 3104 CERAMIC 1U K 6.3V
C2034 303 298 9602 CERAMIC 0.1U K 16V
C2035 303 298 9602 CERAMIC 0.1U K 16V
C2037 303 298 9602 CERAMIC 0.1U K 16V
C2038 303 298 9602 CERAMIC 0.1U K 16V
C2039 303 429 3202 CERAMIC 22U M 6.3V
C2045 303 298 9602 CERAMIC 0.1U K 16V
C2046 303 384 6409 CERAMIC 4.7U K 6.3V
C2047 303 298 9602 CERAMIC 0.1U K 16V
C2048 303 343 3104 CERAMIC 1U K 6.3V
C2049 303 298 9602 CERAMIC 0.1U K 16V
C2051 303 420 7209 CERAMIC 10U K 10V
C2053 303 343 3104 CERAMIC 1U K 6.3V
C2054 303 298 9602 CERAMIC 0.1U K 16V
C2056 303 420 7209 CERAMIC 10U K 10V
C2057 303 429 3202 CERAMIC 22U M 6.3V
C2060 303 298 9602 CERAMIC 0.1U K 16V
C2063 303 298 9602 CERAMIC 0.1U K 16V
C2064 303 298 9602 CERAMIC 0.1U K 16V
C2074 303 298 9602 CERAMIC 0.1U K 16V
C2078 303 215 2204 CERAMIC 0.01U K 50V
C2079 303 298 9602 CERAMIC 0.1U K 16V
C2080 303 172 6109 CERAMIC 270P J 50V
C2081 303 338 0309 CERAMIC 0.1U K 10V
C2082 303 155 1602 CERAMIC 33P J 50V
C2083 303 266 0105 CERAMIC 4.7P C 50V
C2084 303 311 7806 CERAMIC 8P D 50V
C2085 303 378 1601 ELECT 470U M 16V
C2086 303 421 0209 CERAMIC 47U M 6.3V
C2087 303 155 1602 CERAMIC 33P J 50V
C2088 303 398 3708 ELECT 22U M 16V
C2089 303 172 6109 CERAMIC 270P J 50V
C2090 303 338 0309 CERAMIC 0.1U K 10V
C2091 303 139 7507 CERAMIC 39P J 50V
C2092 303 338 0309 CERAMIC 0.1U K 10V
C2093 303 338 0309 CERAMIC 0.1U K 10V
C3001 303 343 3104 CERAMIC 1U K 6.3V
C3002 303 298 9602 CERAMIC 0.1U K 16V
C3003 303 343 3104 CERAMIC 1U K 6.3V
C3004 303 298 9602 CERAMIC 0.1U K 16V
C3005 303 113 3808 CERAMIC 1000P K 50V
C3006 303 113 3808 CERAMIC 1000P K 50V
C3007 303 157 6209 CERAMIC 220P K 50V
C3008 303 420 7902 CERAMIC 10U K 16V
C3009 303 343 3104 CERAMIC 1U K 6.3V
C3010 303 343 3104 CERAMIC 1U K 6.3V
C3011 303 157 6209 CERAMIC 220P K 50V
C3012 303 343 3104 CERAMIC 1U K 6.3V
C3013 303 391 0506 CERAMIC 10U K 6.3V
C3014 303 113 3808 CERAMIC 1000P K 50V
C3015 303 276 1307 CERAMIC 1000P K 50V
C3016 303 392 5005 CERAMIC 22U M 6.3V
C3017 303 343 3104 CERAMIC 1U K 6.3V
C3018 303 113 3808 CERAMIC 1000P K 50V
C3020 303 113 3808 CERAMIC 1000P K 50V
C3021 303 113 3808 CERAMIC 1000P K 50V
C3022 303 343 3104 CERAMIC 1U K 6.3V
C3023 303 343 3104 CERAMIC 1U K 6.3V
C3024 303 113 3808 CERAMIC 1000P K 50V
C3025 303 420 7902 CERAMIC 10U K 16V
C3026 303 342 3303 CERAMIC 0.1U K 25V
C3027 303 139 7309 CERAMIC 18P J 50V
C3030 645 069 5070 TRIMMER,10PF
C3031 303 139 7705 CERAMIC 7P D 50V
C3032 303 276 3103 CERAMIC 33P J 50V
C3033 303 276 3103 CERAMIC 33P J 50V
C3034 303 276 3103 CERAMIC 33P J 50V
C3035 303 276 3103 CERAMIC 33P J 50V
C3036 303 276 3103 CERAMIC 33P J 50V
C3037 303 276 3103 CERAMIC 33P J 50V
C3038 303 276 3103 CERAMIC 33P J 50V
C3039 303 276 3103 CERAMIC 33P J 50V
C3040 303 276 3103 CERAMIC 33P J 50V
C3041 303 276 3103 CERAMIC 33P J 50V
L5802 645 098 2187 INDUCTOR,1.8U N
L5803 645 084 1231 INDUCTOR,4.7U N
L5804 645 084 1231 INDUCTOR,4.7U N
L6003 945 048 5757 IMPEDANCE,120 OHM P
L6004 645 059 7596 IMPEDANCE,90 OHM P
L6005 645 059 7596 IMPEDANCE,90 OHM P
L6007 945 048 5757 IMPEDANCE,120 OHM P
(TRANSFORMER)
T6001 645 095 9332 UNIT,CONNECTOR WITH TRANS
(CAPACITORS)
C1001 303 276 1307 CERAMIC 1000P K 50V
C1002 303 381 8109 CERAMIC 1U K 6.3V
C1003 303 384 6409 CERAMIC 4.7U K 6.3V
C1004 303 286 1403 CERAMIC 10P D 50V
C1005 303 384 6409 CERAMIC 4.7U K 6.3V
C1006 303 338 0309 CERAMIC 0.1U K 10V
C1007 303 384 6409 CERAMIC 4.7U K 6.3V
C1008 303 338 0309 CERAMIC 0.1U K 10V
C1009 303 381 8109 CERAMIC 1U K 6.3V
C1010 303 338 0309 CERAMIC 0.1U K 10V
C1011 303 338 0309 CERAMIC 0.1U K 10V
C1012 303 384 6409 CERAMIC 4.7U K 6.3V
C1013 303 338 0309 CERAMIC 0.1U K 10V
C1014 303 338 0309 CERAMIC 0.1U K 10V
C1016 303 381 8109 CERAMIC 1U K 6.3V
C1017 303 381 8109 CERAMIC 1U K 6.3V
C1018 303 276 1000 CERAMIC 0.01U K 16V
C1019 303 276 1307 CERAMIC 1000P K 50V
C1021 303 276 1307 CERAMIC 1000P K 50V
C1024 303 384 6409 CERAMIC 4.7U K 6.3V
C1027 303 338 0309 CERAMIC 0.1U K 10V
C1028 303 338 0309 CERAMIC 0.1U K 10V
C1029 303 338 0309 CERAMIC 0.1U K 10V
C1030 303 338 0309 CERAMIC 0.1U K 10V
C1036 303 338 0309 CERAMIC 0.1U K 10V
C1037 303 338 0309 CERAMIC 0.1U K 10V
C1038 303 338 0309 CERAMIC 0.1U K 10V
C1039 303 338 0309 CERAMIC 0.1U K 10V
C1040 303 338 0309 CERAMIC 0.1U K 10V
C1041 303 338 0309 CERAMIC 0.1U K 10V
C1042 303 338 0309 CERAMIC 0.1U K 10V
C1045 303 338 0309 CERAMIC 0.1U K 10V
C1047 303 384 6409 CERAMIC 4.7U K 6.3V
C1048 303 384 6409 CERAMIC 4.7U K 6.3V
C1051 303 338 0309 CERAMIC 0.1U K 10V
C1052 303 338 0309 CERAMIC 0.1U K 10V
C1053 303 338 0309 CERAMIC 0.1U K 10V
C1054 303 338 0309 CERAMIC 0.1U K 10V
C1055 303 338 0309 CERAMIC 0.1U K 10V
C1056 303 338 0309 CERAMIC 0.1U K 10V
C1057 303 338 0309 CERAMIC 0.1U K 10V
C1058 303 338 0309 CERAMIC 0.1U K 10V
C1063 303 338 0309 CERAMIC 0.1U K 10V
C1064 303 338 0309 CERAMIC 0.1U K 10V
C1065 303 338 0309 CERAMIC 0.1U K 10V
C1066 303 338 0309 CERAMIC 0.1U K 10V
C1067 303 338 0309 CERAMIC 0.1U K 10V
C1068 303 338 0309 CERAMIC 0.1U K 10V
C1075 303 384 6409 CERAMIC 4.7U K 6.3V
C1076 303 113 3808 CERAMIC 1000P K 50V
C1077 303 113 3808 CERAMIC 1000P K 50V
C1078 303 384 6409 CERAMIC 4.7U K 6.3V
C1079 303 392 5005 CERAMIC 22U M 6.3V
C1121 303 314 6400 CERAMIC 7P D 50V
C1122 303 314 6400 CERAMIC 7P D 50V
C1407 303 338 0309 CERAMIC 0.1U K 10V
C1408 303 286 1403 CERAMIC 10P D 50V
C2001 303 358 8309 CERAMIC 1U K 10V
C2002 303 358 8309 CERAMIC 1U K 10V
C2003 303 370 0305 CERAMIC 4.7U K 6.3V
C2004 303 370 0305 CERAMIC 4.7U K 6.3V
C2005 303 155 1800 CERAMIC 0.01U K 25V
C2006 303 420 7209 CERAMIC 10U K 10V
C2007 303 420 7209 CERAMIC 10U K 10V
C2010 303 358 8309 CERAMIC 1U K 10V
C2016 303 298 9602 CERAMIC 0.1U K 16V
C2018 303 298 9602 CERAMIC 0.1U K 16V
C2021 303 298 9602 CERAMIC 0.1U K 16V

20
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
C3042 303 276 3103 CERAMIC 33P J 50V
C3043 303 276 3103 CERAMIC 33P J 50V
C3044 303 276 3103 CERAMIC 33P J 50V
C3045 303 276 3103 CERAMIC 33P J 50V
C3047 303 371 9000 CERAMIC 10U M 6.3V
C4001 303 343 3104 CERAMIC 1U K 6.3V
C4002 303 381 8109 CERAMIC 1U K 6.3V
C4003 303 343 3104 CERAMIC 1U K 6.3V
C4004 303 338 0309 CERAMIC 0.1U K 10V
C4005 303 343 3104 CERAMIC 1U K 6.3V
C4006 303 298 9602 CERAMIC 0.1U K 16V
C4007 303 276 1000 CERAMIC 0.01U K 16V
C4008 303 343 3104 CERAMIC 1U K 6.3V
C4009 303 298 9602 CERAMIC 0.1U K 16V
C4010 303 429 3202 CERAMIC 22U M 6.3V
C4012 303 298 9602 CERAMIC 0.1U K 16V
C4013 303 157 3604 CERAMIC 100P J 50V
C4014 303 429 3202 CERAMIC 22U M 6.3V
C4015 303 429 3202 CERAMIC 22U M 6.3V
C4016 303 429 3202 CERAMIC 22U M 6.3V
C4017 303 382 6302 CERAMIC 1U K 16V
C4020 303 382 6302 CERAMIC 1U K 16V
C4021 403 455 1606 CERAMIC 10U K 16V
C5802 303 384 6409 CERAMIC 4.7U K 6.3V
C5803 303 305 8802 CERAMIC 47P J 50V
C5804 303 276 1307 CERAMIC 1000P K 50V
C5805 303 421 0209 CERAMIC 47U M 6.3V
C5806 303 384 6508 CERAMIC 10U K 6.3V
C5807 303 421 0209 CERAMIC 47U M 6.3V
C5808 303 421 0209 CERAMIC 47U M 6.3V
C5809 303 384 6409 CERAMIC 4.7U K 6.3V
C5810 303 343 3104 CERAMIC 1U K 6.3V
C5811 303 384 6508 CERAMIC 10U K 6.3V
C5812 303 215 2204 CERAMIC 0.01U K 50V
C5813 303 343 3104 CERAMIC 1U K 6.3V
C5814 303 384 6409 CERAMIC 4.7U K 6.3V
C5815 303 384 6508 CERAMIC 10U K 6.3V
C6001 303 139 7101 CERAMIC 12P J 50V
C6002 303 155 1800 CERAMIC 0.01U K 25V
C6003 303 155 4207 CERAMIC 15P J 50V
C6004 303 419 8903 CERAMIC 10U M 6.3V
C6005 303 298 9602 CERAMIC 0.1U K 16V
C6008 303 419 8903 CERAMIC 10U M 6.3V
C6009 303 276 1000 CERAMIC 0.01U K 16V
C6010 303 338 0309 CERAMIC 0.1U K 10V
C6011 303 155 1800 CERAMIC 0.01U K 25V
C6012 303 338 0309 CERAMIC 0.1U K 10V
C6013 303 338 0309 CERAMIC 0.1U K 10V
C6014 303 338 0309 CERAMIC 0.1U K 10V
C6016 303 298 9602 CERAMIC 0.1U K 16V
C6017 303 338 0309 CERAMIC 0.1U K 10V
C6019 303 276 1000 CERAMIC 0.01U K 16V
C6020 303 215 2907 CERAMIC 0.022U K 25V
C6021 303 338 0309 CERAMIC 0.1U K 10V
C6022 303 429 3202 CERAMIC 22U M 6.3V
C6023 303 298 9602 CERAMIC 0.1U K 16V
C6024 303 298 9602 CERAMIC 0.1U K 16V
C9501 303 298 9602 CERAMIC 0.1U K 16V
C9507 303 192 5908 CERAMIC 0.1U K 25V
C9508 303 391 8809 CERAMIC 2.2U K 16V
C9701 303 358 8309 CERAMIC 1U K 10V
C9702 303 298 9602 CERAMIC 0.1U K 16V
C9703 303 298 9602 CERAMIC 0.1U K 16V
C9704 303 155 2302 CERAMIC 4700P K 50V
C9705 303 215 1009 CERAMIC 470P J 50V
C9706 303 113 3808 CERAMIC 1000P K 50V
C9707 303 298 9602 CERAMIC 0.1U K 16V
C9708 303 298 9602 CERAMIC 0.1U K 16V
C9710 303 343 3104 CERAMIC 1U K 6.3V
C9712 303 157 3604 CERAMIC 100P J 50V
C9714 303 343 3104 CERAMIC 1U K 6.3V
C9715 303 343 3104 CERAMIC 1U K 6.3V
C9801 303 358 8309 CERAMIC 1U K 10V
(RESISTOR PACKS)
RB202 945 037 4389 R-NETWORK 330X4 1/16W
RB203 945 037 4389 R-NETWORK 330X4 1/16W
RB204 945 037 4389 R-NETWORK 330X4 1/16W
RB205 945 037 4389 R-NETWORK 330X4 1/16W
(RESISTORS)
R1001 301 224 9009 MT-GLAZE 10K JA 1/16W
R1002 301 224 9702 MT-GLAZE 22 JA 1/16W
R1003 301 105 7902 MT-GLAZE 0.000 ZA 1/16W
R1004 301 226 1506 MT-GLAZE 0.000 ZA 1/16W
R1006 301 224 9009 MT-GLAZE 10K JA 1/16W
R1007 301 224 9009 MT-GLAZE 10K JA 1/16W
R1008 301 224 9009 MT-GLAZE 10K JA 1/16W
R1009 301 226 1506 MT-GLAZE 0.000 ZA 1/16W
R1011 301 224 9306 MT-GLAZE 1K JA 1/16W
R1012 301 224 9009 MT-GLAZE 10K JA 1/16W
R1013 301 224 9009 MT-GLAZE 10K JA 1/16W
R1016 301 226 1506 MT-GLAZE 0.000 ZA 1/16W
R1019 301 224 9009 MT-GLAZE 10K JA 1/16W
R1020 301 224 9009 MT-GLAZE 10K JA 1/16W
R1022 301 105 6400 MT-GLAZE 68 JA 1/16W
R1023 301 226 1506 MT-GLAZE 0.000 ZA 1/16W
R1024 301 224 9009 MT-GLAZE 10K JA 1/16W
R1026 301 224 9009 MT-GLAZE 10K JA 1/16W
R1027 301 105 0408 MT-GLAZE 100 JA 1/16W
R1028 301 105 0408 MT-GLAZE 100 JA 1/16W
R1029 301 105 0408 MT-GLAZE 100 JA 1/16W
R1030 301 105 0408 MT-GLAZE 100 JA 1/16W
R1031 301 105 0408 MT-GLAZE 100 JA 1/16W
R1032 301 105 0408 MT-GLAZE 100 JA 1/16W
R1033 301 224 9306 MT-GLAZE 1K JA 1/16W
R1034 301 105 5106 MT-GLAZE 47 JA 1/16W
R1035 301 105 5106 MT-GLAZE 47 JA 1/16W
R1036 301 105 5106 MT-GLAZE 47 JA 1/16W
R1037 301 105 5106 MT-GLAZE 47 JA 1/16W
R1038 301 105 5106 MT-GLAZE 47 JA 1/16W
R1039 301 224 9009 MT-GLAZE 10K JA 1/16W
R1040 301 105 5106 MT-GLAZE 47 JA 1/16W
R1041 301 275 1908 MT-GLAZE 2K DC 1/16W
R1042 301 105 5106 MT-GLAZE 47 JA 1/16W
R1043 301 105 5106 MT-GLAZE 47 JA 1/16W
R1044 301 105 5106 MT-GLAZE 47 JA 1/16W
R1045 301 105 5106 MT-GLAZE 47 JA 1/16W
R1046 301 105 5106 MT-GLAZE 47 JA 1/16W
R1047 301 105 5106 MT-GLAZE 47 JA 1/16W
R1048 301 105 5106 MT-GLAZE 47 JA 1/16W
R1049 301 105 5106 MT-GLAZE 47 JA 1/16W
R1050 301 105 5106 MT-GLAZE 47 JA 1/16W
R1051 301 105 7902 MT-GLAZE 0.000 ZA 1/16W
R1052 301 105 7902 MT-GLAZE 0.000 ZA 1/16W
R1054 301 105 5106 MT-GLAZE 47 JA 1/16W
R1055 301 105 0606 MT-GLAZE 10K JA 1/16W
R1056 301 105 0606 MT-GLAZE 10K JA 1/16W
R1057 301 105 3904 MT-GLAZE 33 JA 1/16W
R1058 301 105 3904 MT-GLAZE 33 JA 1/16W
R1059 301 105 3904 MT-GLAZE 33 JA 1/16W
R1060 301 105 3904 MT-GLAZE 33 JA 1/16W
R1061 301 105 0606 MT-GLAZE 10K JA 1/16W
R1062 301 105 0606 MT-GLAZE 10K JA 1/16W
R1063 301 105 0606 MT-GLAZE 10K JA 1/16W
R1064 301 105 0606 MT-GLAZE 10K JA 1/16W
R1065 301 105 0606 MT-GLAZE 10K JA 1/16W
R1066 301 105 0606 MT-GLAZE 10K JA 1/16W
R1067 301 105 0606 MT-GLAZE 10K JA 1/16W
R1068 301 226 1506 MT-GLAZE 0.000 ZA 1/16W
R1069 301 105 3904 MT-GLAZE 33 JA 1/16W
R1070 301 105 3904 MT-GLAZE 33 JA 1/16W
R1071 301 105 3904 MT-GLAZE 33 JA 1/16W
R1072 301 105 3904 MT-GLAZE 33 JA 1/16W
R1073 301 105 0606 MT-GLAZE 10K JA 1/16W
R1074 301 105 0606 MT-GLAZE 10K JA 1/16W
R1075 301 105 0606 MT-GLAZE 10K JA 1/16W
R1076 301 105 0606 MT-GLAZE 10K JA 1/16W
R1077 301 105 0606 MT-GLAZE 10K JA 1/16W
R1078 301 105 0606 MT-GLAZE 10K JA 1/16W
R1079 301 105 0606 MT-GLAZE 10K JA 1/16W
R1080 301 105 0606 MT-GLAZE 10K JA 1/16W
R1081 301 105 0606 MT-GLAZE 10K JA 1/16W
R1082 301 105 0606 MT-GLAZE 10K JA 1/16W
R1083 301 105 0606 MT-GLAZE 10K JA 1/16W
R1084 301 225 0302 MT-GLAZE 33 JA 1/16W
R1085 301 105 7902 MT-GLAZE 0.000 ZA 1/16W
R1086 301 105 7902 MT-GLAZE 0.000 ZA 1/16W