Sartorius IS16EDE-H User manual

98648-010-27
Sartorius
IS16EDE-H, IS16EDE-H0CE, IS34EDE-H, IS34EDE-H0CE,
IS64EDE-H, IS64EDE-S, IS64EDE-H0CE
Weighing Platform for Displa and Control Unit
for Standard Use or Verified for Use in Legal Metrolog
Installation and Operating Instructions
Industrial
Weighing Technolog

2
Contents
Page
General View of the Weighing Platform 3
Intended Use 4
Warranty 4
Storage and Shipping Conditions 4
Safety Instructions 4
Installation Instructions 5
Ambient Conditions 5
Conditioning the Weighing Platform 5
IP65 Protection 5
Getting Started 6
Setting Up the Weighing Platform 6
Leveling the Weighing Platform 6
Connecting the Weighing Platform 6
Separate Power Connection for
the Weighing Platform (Optional) 7
Safety Precautions 8
Fixed Power Connection 8
Warmup Time 9
Menu Access Switch 9
Operating Limits 9
Maximum Overload Capacity 9
Shock Resistance 9
General Instructions for Integration into
Conve or S stems 10
Preload Range (Zero-setting Range) 10
Configuring the Weighing Platform 10
Specifications Charts 11
General Specifications 14
Selecting and Affixing the Respective
ID Label 15
Pin Assignment Chart for the
RS-485 Interface 15
Pin Assignments/Interface Connector 15
Troubleshooting Guide 16
Care and Maintenance 18
Service 18
Cleaning 18
Wet Environment 18
Corrosive Environment 18
Safety Inspection 18
Instructions for Recycling the Packaging 18
CE Marking 19
Declaration of Conformit 20
Using the Weighing Platform
in Legal Metrolog 21
Components of a Verifiable
Weighing S stem 21
Page
Separate Testing and Verification
of Weighing System Components 21
Effect of the Preload on Verifiability 21
”EC Verification” - A Service Offered by
Sartorius 22
Subsequent Verifications within the
European Countries 22
EC T pe Approval Certificate 23
Plates and Markings 26
Dimensions (Scale Drawings) 27
Accessories (Options) 28

3
1
2
3
4
5
6
8
9
7
General View of the Weighing Platform
No. Designation No. Designation
1 Load plate 6 Connecting cable
2 Manufacturer’s label (interface port/power supply)
3 Metrological ID labels (only on weighing 7 Valve for barometric pressure compensation
platforms verifiable or verified for use in 8 Blank for power supply cable gland
legal metrology) (optional)
4 Leveling feet 9 Menu access switch (located behind the plug )
5 Level indicator
General View

4
Intended Use
This weighing platform is part of a modular system that consists of the
weighing module (weighing platform) and a display and control unit or isi
industrial terminal. The display and control unit comes with a separate
instruction manual. Before installing or operating your weighing equipment,
please read all instructions thoroughly.
Warrant
Do not miss out on the benefits of our full warranty. Please contact your
Sartorius office or dealer for further information. If available, complete the
warranty registration card, indicating the date of installation, and return it to
your Sartorius office or dealer.
Storage and Shipping Conditions
– Allowable storage temperature: – 10 °C to + 40°C
+ 14 °F to + 104 °F
– Allowable humidity during storage: 90% relative humidity
After unpacking the equipment, please check it immediately for any visible
damage. If you detect any damage, proceed as directed in the section
entitled “Safety Inspection.”
It is a good idea to save the box and all parts of the packaging until you
have successfully installed the equipment. Only the original packaging
provides the best protection for shipment. To prevent damage to the
equipment, unplug all cables before packing the equipment for shipping.
Safet Instructions
The equipment may be opened only by authorized service technicians who
have been trained by Sartorius and who perform repair or maintenance work
in accordance with Sartorius’ standard operating procedures.
– Always disconnect the equipment from power before performing
any repair work.
– Do not use the weighing platform in a hazardous area/location.
– Do not operate the equipment in environments exposed to potentially
explosive mixtures of ambient gases and dust.
– Any damage to the seals affixed to the equipment housing will result
in forfeiture of all claims under the manufacturer’s warranty.
Note:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense. Changes or
modifications not expressly approved by Sartorius AG could void the user’s
authority to operate the equipment.

5
Installation Instructions
The equipment must be installed and put into operation by a trained Sartorius
dealer or service technician, who will also show you how to work with it.
Ambient Conditions
Choose a suitable place to set up the weighing platform. Avoid exposing the
weighing platform to the following ambient conditions:
– Extreme heat radiation
– Extreme vibration
– Aggressive chemical vapors
– Difficulty of access for maintenance and cleaning
Important:
If you need to use the weighing platform in an area exposed to heavy traffic
(e.g., fork-lift trucks), you should install a protective frame, consisting of
angular braces, around the weighing platform.
To calculate the dimensions for this protective frame, refer to the section
entitled “Dimensions (Scale Drawings).”
Conditioning the Weighing Platform
Do not expose the weighing platform to extreme moisture over long periods.
Moisture in the air can condense on the surfaces of a cold platform whenever
it is brought to a substantially warmer place. If you transfer the weighing
platform to a warmer area, make sure to condition it for about 2 hours at the
new ambient temperature, leaving it unplugged from the power supply.
Afterwards, if you keep the weighing platform connected to the power supply,
the continuous positive difference between the inside of the platform and the
outside will practically rule out the effects of moisture condensation.
IP65 Protection
In conformance with the IP65 protection rating, the weighing platform is dust-
tight (protection rating 6: resistant to penetration by dust particles, according
to particle size) and washdown-resistant (rating 5: resistant to splashes of
water, washdown-resistant).
IP65 protection is guaranteed only if:
– the seals were installed by a qualified technician, and
– the connecting cables and cable glands were installed and
connected by a qualified technician.
Installation Instructions

6
Getting Started
Setting Up the Weighing Platform
- Remove the weighing platform and load plate from the packaging
- Remove the foam material and manufacturer’s labels
- Place the load plate on the weighing platform
Leveling the Weighing Platform
Level the weighing platform at the place of installation using the leveling feet
(4) so that the air bubble is centered within the circle of the level indicator (5):
To raise the weighing platform, extend the leveling feet (turn clockwise).
To lower the weighing platform, retract the leveling feet (turn
counterclockwise).
Make sure all four feet are in contact with the surface on which the platform
stands.
Important:
- Do not perform any installation work while the equipment is connected to
power.
- Installation work that affects the IP65 protection rating must be performed
with extreme care.
- Always disconnect the equipment from power before connecting or
disconnecting the data cable.
- Failure to observe the instructions contained in this manual during
installation will result in forfeiture of all claims under the manufacturer’s
warranty.
Connecting the Weighing Platform
Please note that any person or company connecting a non-Sartorius-approved
display and control unit (such as a computer) or AC adapter to the weighing
platform shall assume all risks and responsibilities associated with this
equipment.
Use only original Sartorius AC adapters.
The connecting cable is 3 meters long (approx. 10 feet). To order an
extension cable or a customized cable, refer to the list of accessories or
contact Sartorius.
Cable Lengths:
Because you can choose whether to power the weighing platform via the
interface port of the display and control unit or using a separate AC adapter
(adapter kit required; must be installed by a Sartorius service technician),
some restrictions apply to the cable lengths permissible between components.
If ou use a cable longer than 12 meters (∼ 40 feet) between the weighing
platform and the displa and control unit, each of these components must be
powered b a separate AC adapter.

7
Separate Power Connection (Optional) for the Weighing Platform
An adapter kit must be installed by a Sartorius dealer or service technician to
connect the weighing platform separately to line current (mains supply). In
addition, this separate power connection is required if you interface the
weighing platform directly with a computer.
The following diagrams show the options for powering weighing platforms
and display and control units:
Connecting the industrial-grade ING2 AC adapter to the Sartorius isi
industrial terminal without an extension cord:
Connecting the industrial-grade ING2 AC adapter only to the isi industrial
terminal with an extension cord:
Connections using cables longer than 12 m (~40 ft):
max3m
max3m
Getting Started
3m 6m
300 m max.

8
The weighing platform is powered by the external industrial-grade ING 2 AC
adapter (see “Accessories”). Make sure that the voltage rating printed on this
unit is identical to your local line voltage. If the voltage specified on the label
or the plug design does not match the rating or standard you use, please
contact your local Sartorius office or dealer. To use a main feeder cable from
the ceiling or to mount a CEE plug, you will have to make arrangements
inside your facilities for installation of such cable equipment.
Use only original Sartorius AC adapters, identified by the Sartorius label. Use
of AC adapters from other manufacturers, even if these units have an
approval identification marking from a national testing laboratory, requires the
consent of a trained service technician.
For detailed information on further options for powering the equipment (e.g.,
using local low voltage), contact Sartorius AG headquarters in Germany or
one of the main offices based in your country.
The equipment must be connected to power in conformance with the
installation requirements of your country.
Safet Precautions
The Sartorius power supply rated to Industrial Class 2 (with safety extra-low
voltage emission (SELV)) can be plugged into any electrical outlet without
additional safety precautions. The ground or earth terminal is connected to
the platform housing, which can be additionally grounded, if required.
Install the power cable with adequate protection to prevent damage to the
cable.
Fixed Power Connection
If the power cable is permanently installed or secured so that it cannot be
unplugged, an emergency switch must be installed for disconnecting power to
the equipment. This emergency switch must be located near the weighing
platform and must be easily accessible. In addition, this switch must be
labeled as an emergency switch. All operators must be instructed in the use
of this switch.
Whenever possible, avoid wiring your weighing platform into networks that
carry a heavy load (such as a connection to a compressor or similar
equipment).

9
Warmup Time
To deliver exact results, the weighing platform must warm up for at least 30
minutes after initial connection to AC power or after a relatively long power
outage. Only after this time will the weighing platform have reached the
required operating temperature.
Preparing the Weighing Platform for Verification for Use in Legal Metrolog
in the EU:* Allow the weighing platform to warm up for at least 24 hours
after initial connection to the power suppl .
* including the Signatories of the Agreement on the European Economic Area
Menu Access Switch
Prior to Verification:
– All settings in the operating menu are accessible
(once the weighing platform has been verified for use in legal metrology,
menu items relevant to legal metrology are blocked)
– Select configuration settings from corresponding specifications group
(configuration cannot be changed after verification)
– Block the ‘write’ function for the xBPI interface
Function of the Menu Access Switch in Verification for Use in Legal
Metrolog :
When the menu access switch (9) is open, weighing ranges can be
configured and calibration/adjustment can be performed, prior to
verification.
After Verification:
Move the menu access switch (9) to the left. Configuration settings relevant to
use of the weighing platform in legal metrology are no longer accessible.
Operating Limits
Maximum Overload Capacit
Because Sartorius weighing platforms are constructed to withstand rough
treatment in industrial environments, the platform will not be damaged if
occasionally loaded beyond the maximum weighing capacity.
The maximum overload capacity of this IS model is 130 kg.
Shock Resistance
Even though Sartorius weighing platforms feature highly rugged construction,
there are some limits. Avoid dropping objects from a considerable height
onto the weighing platform and do not expose the platform to strong side
impact. Sartorius weighing platforms are shock resistant in accordance with
the shock response spectrum defined in the IEC68 standard, Part 2-27.
Getting Started

10
General Instructions for Integration into
Conve or S stems
The IS weighing platform is suitable for installation in conveyor systems. Follow
the general instructions given below and refer to the “Dimensions (Scale
Drawings)” to meet the requirements for such installation.
– Any moving or rotating parts intended to be permanently attached to the
load plate must be designed so that they cannot negatively affect the
accuracy of weighing results. For example, rotating mechanisms must be
properly balanced.
– The load plate must be clear on all sides so that any parts or any dirt that
falls will not create a connection between the weighing platform and any
permanently mounted preload components.
– Any cables or tubing between the weighing platform and other equipment
must not apply any force to the weighing platform. Make sure that
cables do not touch the load plate.
– Do not install the weighing platform in a conveyor system located in a
Zone 2 or 11 hazardous area/location.
Preload Range (Zero-setting Range)
The weight of components that are permanently installed on the weighing
platform is called “preload.” The weighing platform electrically compensates for
this preload so that the entire weighing range is available and the platform can
be zeroed and can also be calibrated/adjusted using external weights. Higher
preloads may result in a reduction in the maximum weighing capacity. The
maximum preload that can be compensated for depends on the specifications
configured (please see the “Specifications Chart”).
The preload must be set before the platform is verified for use in legal metrology.
The components for integration into a conveyor must be installed on the
weighing platform before you connect the platform to the power supply.
Configuring the Weighing Platform
If you have a standard-model weighing platform, you can adapt it for specific
requirements such as weighing in international weight units, use under
unfavorable ambient conditions, or further processing of weighing results, for
example. If your weighing platform is to be verified for use in legal metrology,
one weight unit must be selected before verification, and cannot be changed
after verification has been performed.
To configure settings in the weighing platform, access the operating menu in the
display and control unit. You can use either of the following as a display and
control unit with your IS weighing platform:
– Sartorius isi industrial terminal
–Computer with a special Sartorius configuration program (see
“Accessories”)
The configuration options for your weighing platform are listed in the
“Specifications Chart”on the following pages.

11
Specifications Charts
Access the configuration menu of the Sartorius industrial terminal or display and control unit of your choice. You need to set the appropriate codes
before verification of the platform as a legal measuring instrument. Please note that when you change the configuration, this may also change the
accuracy class besides the weighing capacity and the readability.
IS16EDE-H0CE (module, type BFBF/ together with the isi operator and indicating terminal (industrial terminal) or a PC with Sartorius software of
the type isoTEST), verifiable for use in legal metrology
IS16EDE-H0CE (type designation: modular instrument, type BF BF/modular instrument together with the isi industrial terminal or a PC with
Sartorius software), verifiable for use in legal metrology.
Specifications group Spec. gp.1* Spec. gp.2 Spec. gp.3 Spec. gp.4 Spec. gp.5 Spec. gp.6
(code): (10 3 1) (10 3 2) (10 3 3)5) (10 3 4)5) (10 3 5) (10 3 6)
Maximum capacity kg 16 6.1 3.1 12.1 16 12.1
Readability g 0.1 0.1 0.1 0.5 0 to 6 kg: 0.1 0 to 6 kg: 0.1
6 to 16 kg: 1 6 to 12.1 kg: 1
Weighing range Standard Configurable Configurable Configurable Configurable Configurable
Zero tracking±2% kg ±0.32 ±0.12 ±0.06 ±0.24 ±0.32 ±0.24
Initial zero-setting range kg ±1 ±1 ±1 ±1 ±1 ±1
Preload 1) kg 4 14 17 8 4 8
isoTEST function2) yes yes yes yes yes yes
Metrological specifications
Accuracy class kg KKStandard Standard KK
Minimum capacity
acc. to CD 3)g5 5––55
Minimum capacity
acc. to AWC4) g 150 150 ––150 150
Verification scale interval g 1 1 ––11
Temperature range °C +10 to +30 +10 to +30 +10 to +30 +10 to +30 +10 to +30 +10 to +30
1) No reduction in the maximum capacity up to this preload; higher preloads reduce the maximum capacity in 0.1-kg steps
2) The isoTEST function cannot be selected for preloads > approx. 18 kg
3) CD = Council Directive 90/384/EEC on non-automatic weighing instruments used in the EU and the Signatories of the Agreement on the
European Economic Area
4) AWC = average weight control based on the requirements of the German Regulations for Prepackaged Products
5) Not allowed for use in legal metrology (legal for trade). A 10-kg calibration weight is required for external adjustment.
* = factory setting
IS16EDE-H0CE (module, type BFBF/ together with the isi operator and indicating terminal (industrial terminal) or a PC
with Sartorius software of the type isoTEST), verifiable for use in legal metrology
Specifications group Spec. gp.7 Spec. gp.8 Spec. gp.9 Spec. gp.10 Spec. gp.11 Spec. gp.12
(code): (10 3 7) (10 3 8) (10 3 9) (10 3 10) (10 3 11) (10 3 12)
Maximum capacity kg 16 16 12.1 16 6.1 3.1
Readability g 0 to 3 kg: 1 2 2 5 2 1
3 to 6 kg: 2
6 to 16 kg: 5
Weighing range Standard Configurable Configurable Configurable Configurable Configurable
Zero tracking±2% kg ±0.32 ±0.32 ±0.24 ±0.32 ±0.12 ±0.06
Initial zero-setting range kg ±1 ±1 ±1 ±1 ±1 ±1
Preload 1)kg44841417
isoTEST function2) yes yes yes yes yes yes
Metrological specifications
Accuracy class kg lllllStandard
Minimum capacity
acc. to CD 3) g 20 40 40 100 40 –
Minimum capacity
acc. to AWC4) g 150 500 500 2500 500 –
Verification scale interval g 1/2/5 2 2 5 2 –
Temperature range °C +10 to +40 +10 to +40 +10 to +40 +10 to +40 +10 to +40 +10 to +40
1) No reduction in the maximum capacity up to this preload; higher preloads reduce the maximum capacity in 0.1-kg steps. You cannot set a
preload > 17 kg.
2) The isoTEST function cannot be selected for preloads > approx. 18 kg
3) CD = Council Directive 90/384/EEC on non-automatic weighing instruments used in the EU and the Signatories of the Agreement on the
European Economic Area
4) AWC = average weight control based on the requirements of the German Regulations for Prepackaged Products
5) Not allowed for use in legal metrology (legal for trade). A 10-kg calibration weight is required for external adjustment.
Specifications Chards

12
IS34EDE-H0CE (module, type BFBF/ together with the isi operator and indicating terminal (industrial terminal) or a PC
with Sartorius software of the type isoTEST), verifiable for use in legal metrology
Specifications group Spec. gp.1 Spec. gp.2* Spec. gp.3 Spec. gp.4 Spec. gp.5 Spec. gp.6
(code): (10 3 1) (10 3 2) (10 3 3) (10 3 4) (10 3 5) (10 3 6)
Maximum capacity kg 34 34 26.1 34 26.1 34
Readability g 0.1 0 to 6kg: 0.1 0 to 6kg: 0.1 1 1 0 to 6 kg 0.1
6 to 15kg: 0.2 6 to 15kg: 0.2 6 to 34 kg 1
15 to 34kg: 0.5 15 to 26.1kg: 0.5
Weighing range Standard Configurable Configurable Configurable Configurable Configurable
Zero tracking±2% kg ±0.68 ±0.68 ±0.52 ±0.68 ±0.52 ±0.68
Initial zero-setting range kg ±1 ±1 ±1 ±1 ±1 ±1
Preload 1)kg44124124
isoTEST function2) yes yes yes yes yes yes
Metrological specifications
Accuracy class kg KKKKKK
Minimum capacity
acc. to CD 3)g5 55 50505
Minimum capacity
acc. to AWC4) g 150 150 150 150 150 150
Verification scale interval g 1 1 1 1 1 1
Temperature range °C 10 to +30 +10 to +30 +10 to +30 +10 to +30 +10 to +30 +10 to +30
1) No reduction in the maximum capacity up to this preload; higher preloads reduce the maximum capacity in 1-kg steps. You cannot set a
preload > approx. 31 kg.
2) The isoTEST function cannot be selected for preloads > approx. 21 kg
3) CD = Council Directive 90/384/EEC on non-automatic weighing instruments used in the EU and the Signatories of the Agreement on the
European Economic Area
4) AWC = average weight control based on the requirements of the German Regulations for Prepackaged Products
5) Not allowed for use in legal metrology (legal for trade). A 10-kg calibration weight is required for external adjustment.
* = factory setting
IS34EDE-H0CE module, type BFBF/ together with the isi operator and indicating terminal (industrial terminal) or a PC
with Sartorius software of the type isoTEST), verifiable for use in legal metrology
Specifications group Spec. gp.6 Spec. gp.7 Spec. gp.8 Spec. gp.9
(code): (10 3 6) (10 3 7) (10 3 8) (10 3 9)
Maximum capacity kg 34 26.1 34 26.1
Readability g 0 to 6 kg: 2 0 to 6 kg: 2 5 5
6 to 15 kg: 5 6 to 15 kg: 5
15 to 34 kg: 10 15 to 34 kg:10
Weighing range Configurable Configurable Configurable Configurable
Zero tracking±2% kg ±0.68 ±0.52 ±0.68 ±0.52
Initial zero-setting range kg ±1 ±1 ±1 ±1
Preload 1)kg412412
isoTEST function2) yes yes yes yes
Metrological specifications
Accuracy class kg llll
Minimum capacity acc. to CD 3) g 40 40 100 100
Minimum capacity acc. to AWC4) g 500 500 2500 2500
Verification scale interval g 2/5/10 2/5/10 5 5
Temperature range °C +10 to +40 +10 to +40 +10 to +40 +10 to +40
1) No reduction in the maximum capacity up to this preload; higher preloads reduce the maximum capacity in 1-kg steps. You cannot set a
preload > approx.31 kg.
2) The isoTEST function cannot be selected for preloads > approx. 21 kg
3) CD = Council Directive 90/384/EEC on non-automatic weighing instruments used in the EU and the Signatories of the Agreement on the
European Economic Area
4) AWC = average weight control based on the requirements of the German Regulations for Prepackaged Products
5) Not allowed for use in legal metrology (legal for trade). A 10-kg calibration weight is required for external adjustment.
* = factory setting

13
IS 64 EDE-H0CE (type designation: modular instrument, type BB BD/modular instrument together with a verifiable isi
industrial terminal of type BF BF 523).
Specifications group Spec. gp.1* Spec. gp.2 Spec. gp.3 Spec. gp.4
(code): (10 3 1) (10 3 2) (10 3 3)4) (10 3 4)4)
Maximum capacity kg 64 51 31 16
Readability g 1 1 1 1
Weighing range Standard Configurable Configurable Configurable
Zero tracking±2% kg ±1.3 ±1 ±0.6 ±0.3
Initial zero-setting range kg ±1.3 ±1.3 ±1.3 ±1.3
Preload 1)kg13264661
isoTEST function2) yes yes yes yes
Metrological specifications
Accuracy class kg KKStandard Standard
Minimum capacity
acc. to CD 3) g 50 50 ––
Minimum capacity
acc. to AWC4) g 10000 10000 ––
Verification scale interval g 10 10 ––
Temperature range °C 0 to +40 0 to +40 0 to +40 0 to +40
1) No reduction in the maximum capacity up to this preload; higher preloads reduce the maximum capacity in 1-kg steps. You cannot set a
preload > approx.14 kg.
2) The isoTEST function cannot be selected for preloads > approx. 36 kg
3) CD = Council Directive 90/384/EEC on non-automatic weighing instruments used in the EU and the Signatories of the Agreement on the
European Economic Area
4) AWC = average weight control based on the requirements of the German Regulations for Prepackaged Products
* = factory setting
IS 64 EDE-H0CEH0CE (module, type BF BF together with the isi operator and indicating terminal (industrial terminal) or
a PC with Sartorius software of the type isoTEST), verifiable for use in legal metrology
Specifications group Spec. gp.5 Spec. gp.6 Spec. gp.7 Spec. gp.8 Spec. gp.9
(code): (10 3 5) (10 3 6) (10 3 7) (10 3 8) (1039)
Maximum capacity kg 64 64 64 31 16
Readability g 0 to 15 kg: 5 10 20 10 5
15 to 30 kg:10
30 to 64 kg:20
Weighing range Configurable Configurable Configurable Configurable Configurable
Zero tracking±2% kg ±1.28 ±1.28 ±1.28 ±0.6 ±0.3
Initial zero-setting range kg ±1.3 ±1.3 ±1.3 ±1.3 ±1.3
Preload 1) kg1313134661
isoTEST function2) yes yes yes yes yes
Metrological specifications
Accuracy class kg lllll
Minimum capacity
acc. to CD 3) g 100 200 400 200 100
Minimum capacity
acc. to AWC4) g 2500 10000 15000 10000 2500
Verification scale interval g 5/10/20 10 20 10 5
Temperature range °C 0 to +40 0 to +40 0 to +40 0 to +40 0 to +40
1) No reduction in the maximum capacity up to this preload; higher preloads reduce the maximum capacity in 1-kg steps. You cannot set a
preload > approx.14 kg.
2) The isoTEST function cannot be selected for preloads > approx. 36 kg
3) CD = Council Directive 90/384/EEC on non-automatic weighing instruments used in the EU and the Signatories of the Agreement on the
European Economic Area
4) AWC = average weight control based on the requirements of the German Regulations for Prepackaged Products
* = factory setting
Specifications Chards

14
General Specifications
(applicable for use in standard applications, not in legal metrology)
Model IS 16 EDE-H IS 34 EDE-H IS 64 EDE-S IS64EDE-H
Maximum capacity kg 16 34 64 64
Readability g 0.1 0.1 1 0.1
Linearity g ≤±0.2 ≤±0.2 ≤±0.5 ≤±0.3
Repeatability g ≤±0.05 ≤±0.1 ≤±0.3 ≤±0.1
(standard deviation)
Response time (average) s <1.5 <1.5 <1 <1.5
Fastest response time (IQ) s <1 <1 <0.8 <0.8
Adaptation to ambient
conditions and application
requirements by selection of one of 4 optimized filter levels
Data output speed 0.1, 0.1, 0.2, 0.4 (normal data output speed)
(depends on filter level selected)
Dust and water protection rating IP65 IP65 IP65 IP44*
Net weight, approx. kg 15 15 15 15
Requirements for power
connection (optional) ING2 (TNG 220/115V)
Frequency Hz 48 - 63 48 - 63 48 - 63 48 - 63
Power consumption:
with isi 10,20,30 VA max. 34 max. 34 max. 34 max. 34
connected to ING2) average 10 average 10 average 10 average 10
Power consumption:
weighing platform only, VA average 2.5 average 2.5 average 2.5 average 2.5
connected to ING2
Selectable weight units g, kg, ct, oz, ozt, tlh, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol, bat, MS
Allowable ambient °C +0 to +40 +0 to +40 +0 to +40 +0 to +40
temperature range (273 K - 313 K) (273 K - 313 K) (273 K - 313 K)(273 K - 313 K)
Allowable operating °C +10 to +30 +10 to +30 +10 to +30 +10 to +30
temperature range (283 K - 313 K) (283 K - 313 K) (273 K - 313 K)(273 K - 313 K)
Automatic zero tracking,
can be turned off by
menu code °C Standard feature Standard feature Standard featureStandard feature
Built-in interface, RS-485 (standard, xBPI protocol): 8 bits; odd parity; transmission speed: 9600–38,400 baud; half-duplex.
Convertible to RS-232 (SBI protocol): 7 bit; parity: even, mark, odd, space; transmission speed:
150–19,200 baud; 1 or 2 stop bits; software/hardware handshake.
Factory setting: 1200 baud; odd parity; 1 stop bit; hardware handshake with 2 characters after CTS
*) = IP 65 (special version available on request)

15
Selecting and Affixing the Respective ID Label
Select the respective metrology ID label according to the accuracy class of
your choice and affix it to the platform to be verified.
Pin Assignment Chart for the RS-485 Interface
Cable length: 3 m (approx. 10 ft.)
Male connector:
Type C091D, 12-pin round connector with threaded locking ring, Amphenol
(IP65)
A RxD-TxD-N
B Not connected
C Not connected
D Not connected
E Signal GND
F Menu access switch for calibration/adjustment
(routed externally)
G VCC (24V power supply)
H Not connected
J GND (24V power supply)
K GND (24V power supply)
L RxD-TxD-P
M VCC (24V power supply)
Pin Assignments/Interface Connector
(Recommended):
Type C091D, 12-pin, Amphenol (IP65)
Type of cable: AWG 24 specification
Be sure to follow the instructions above for connecting the weighing platform
to the power supply!
Specifications Chards

16
Troubleshooting Guide
Problem Possible Causes Solution
No segments appear on the No line current is available Check the power supply
display The AC adapter is not plugged Plug the AC adapter into
in the platform and into an
electrical outlet
The weighing platform has Turn on the display and
been in standby mode for control unit
more than 5 minutes
The weight display shows “H”The load exceeds the capacity Unload the weighing
of the weighing platform platform
The weight display shows “L”or The load plate is not on the Place the load plate on the
”Err 54" platform weighing platform
The weight display briefly The weight unit selected Change setting in the
indicates “Err 01”requires more decimal places “Devices”setup menu
than are available in the display of the display and control
unit
The weight display briefly One of the requirements for Possible solutions:
indicates “Err 02”calibration/adjustment has not - Zero the weighing
been met (e.g., platform.
the weighing platform is loaded) - Unload the weighing
platform
(Calibrate/ adjust the
weighing platform only
when a zero readout is
displayed)
The weight display briefly Calibration/adjustment could Allow the equipment to
indicates “Err 03”not be completed within a warm up and start
specific time calibration/adjustment
again
The error code “ERR 07”is The last function you activated To change the menu codes, displayed
is not allowed for weighing plat- contact your local dealer or
forms used in legal metrology service technician
(legal for trade)
The error code “ERR 08”is The load on the weighing Check the initial zero-setting displayed
platform is too heavy for the range for the configuration
platform to be zeroed code you have selected
from the “Specifications
Charts”, to determine
whether this range is correct
The error code “ERR 09”is The gross value is < zero and the Check the initial zero-setting displayed
platform is unloaded, but it is not range for the configuration
possible to tare the platform code you have selected
from the “Specifications
Charts”, to determine
whether this range is correct

17
The error code “ERR 10”is There are values stored in the tare Clear the tare memories for
displayed memories for your application, your application first, then
and you tried to clear the lower- clear the lower-level tare
level tare memory memory
The error code “ERR 12”is You tried to store a value in the Check the configuration
displayed tare memory for applications,
although this memory has been
blocked by menu code 2 2 x
You entered a numeric tare that Check the number you have
is not allowed entered and correct it, if
necessary
The error code “ERR 17”is Internal calibration is not Reduce the preload or
displayed possible because the preload select a different
setting is too high configuration code
The error code “ERR 19”is The remaining weighing Reduce the preload
displayed capacity available is too low
because the relatively high
preload setting has reduced the
maximum capacity
The special code “b”remains None of the keys has been Press any key
displayed pressed since the weighing
platform was switched on
The weight readout changes Unstable environment (ambient Set up the weighing
constantly conditions; e.g., too much platform in a different area
vibration or exposure to Access the “Devices”setup
excessive drafts) menu to adapt the
weighing platform to the
particular environment
A foreign object is caught Remove the foreign object
between the load plate and the
platform frame
The readout of the weighing The weighing platform was not Adjust/calibrate the
result is obviously wrong adjusted/calibrated before weighing platform
weighing
The weighing platform is not level Level the weighing platform
as described in the
instructions
If any other errors occur, please contact your local Sartorius dealer or Sartorius Service Center.

18
Care and Maintenance
Service
Regular servicing by a Sartorius technician will extend the service life of your
weighing platform and ensure its continued weighing accuracy. Sartorius can
offer you service contracts, with your choice of regular maintenance intervals
ranging from 6 months to 2 years.
Cleaning
Before cleaning the weighing platform, disconnect it from the power supply
(e.g., unplug the AC adapter).
To clean the weighing platform when it has been exposed to dry ambient
conditions:
–Use a piece of cloth dampened with a commercially available cleaning
agent to wipe down the weighing platform
Wet Environment:
To clean the weighing platform when it has been in a wet environment:
–Use a commercially available cleaning agent and hose down the platform
afterwards.
In conformance with the IP65 protection rating, the weighing platform is
washdown resistant.
However, the applicable standards (EN 60529 and, in Germany, DIN VDE
0470 T1) do not allow the use of pressurized water (such as strong jets of
water using a hose or high-pressure cleaning equipment). When spraying
down the weighing platform, avoid directing strong jets of water at the 4
silicone gaskets beneath the load plate so that they are not torn by the water
pressure.
Never use concentrated acids, bases, solvents or pure alcohol to clean the
weighing platform!
Corrosive Environment
To clean the weighing platform exposed to a corrosive environment:
–Regularly remove all traces of corrosive substances from the platform
–Follow the manufacturer’s directions provided for the disinfectants and
cleaning agents you use to clean the weighing platform
Important Note:
If the water that you use to clean the weighing platform is too hot or too cold,
the difference in temperature between the water and the platform can cause
condensation within the platform. This condensation may cause the weighing
platform to malfunction.
Safet Inspection
If there is any indication that safe operation of the weighing platform is no
longer warranted, turn off the power and disconnect it from the power supply
immediately. Lock the equipment is a secure place to ensure that it cannot be
used for the time being.
Safe operation of the weighing platform with the AC adapter is no longer
ensured when
–there is visible damage to the AC adapter
–the AC adapter no longer functions properly
–the AC adapter has been stored for a relatively long period under adverse
conditions

19
In this case, notify your nearest Sartorius Service Center or the International
Technical Support Unit based in Goettingen, Germany. Maintenance and
repair work may be performed only by authorized Sartorius service
technicians who have access to the required maintenance manuals and have
attended the relevant service training courses.
Instructions for Rec cling the Packaging
Sartorius products are packaged to ensure safe shipment using
environmentally friendly materials. After successful installation of the
equipment, you should return this packaging for recycling. For information on
recycling options, including recycling of old weighing equipment, contact
your municipal waste disposal center or local recycling depot.
C Marking
The CC
CC
Cmarking affixed to the equipment indicates that the equipment meets
the requirements of the following Directive(s):
Council Directive 89/336/EEC “Electromagnetic Compatibility (EMC)”
Applicable European Standards:
Limitation of emissions: EN 50081-1 Residential,
commercial and light industry
EN 50081-2 Industrial environment
Defined immunity
to interference: EN 50082-1 Residential,
commercial and light industry
EN 50082-2Industrial environment
Important Note:
The operator shall be responsible for any modifications to Sartorius equipment
(not permitted on equipment to be verified) and for any connections of cables
or equipment not supplied by Sartorius and must check and, if necessary,
correct these modifications and connections. On request, Sartorius will
provide information on the minimum operating specifications (in accordance
with the Standards listed above for defined immunity to interference).
Pursuant to the German Directive for the Implementation of Regulations for
Prevention of Accidents, “Elektrische Anlagen und Betriebsmittel (VBG 4)”
(electrical installations and equipment) of April 1986, it is hereby certified that
the equipment delivered has been manufactured and tested in compliance
with the following DIN/VDE regulations:
DIN IEC 348/VDE 0411
Safety requirements for electronic measuring apparatus
DIN IEC 380/VDE 0806
Safety of electrically energized office machines
DIN IEC 601/VDE 0750
Safety of medical electrical equipment
and with Article 73/23/EEC, European Community Low Voltage Directive of
19 February 1973.
When you use electrical equipment in installations and under ambient
conditions requiring higher safety standards, you must comply with the
provisions as specified in the applicable regulations for installation in your
country.
Care and Maintenance

20