Savin 9922 User manual

1. Basics
How to Make Copies ..................................................................... page2
2. Reduce/Enlarge
Copying to Different Copy Paper Sizes ............................................ page4
3. Duplex
Making 2-Sided Copies from 1-Sided Originals............................... page6
4. Tray 2
Copying onto Non-standard Paper from Tray 2 ............................... page8
5. Combine
Combining Originals into 1 Copy .............................................page10
6. Stamp/Page Numbering
Stamping Messages and Page Numbers on Copies ....................page12
7. OHP Slip Sheet
Inserting OHP Slip Sheets .........................................................page14
8. Stapling
Stapling While Copying.............................................................page16
9. Features at a Glance...................................page18
This machine comes in two models which are referred
to in this manual as Type 1 and Type 2. Check the
inside front cover of the Copy Reference for the model
you have before reading this guide.
Some limitations may apply to functions for details
please refer to the Copy Reference.
COPY QUICK GUIDE

2
How to Make Copies
Basics
Useful Functions
You can make copies without having to worry about paper size and image density since they are
chosen automatically.
ll
ll
lAuto Image Density
Automatically selects the image density.
ll
ll
lAuto Paper Select
Automaticaliy selects a suitable size of copy paper.
Set the original.
In the Document FeederOn the Exposure Glass
Face - down Face - up
Tip
Make sure that
A:[Auto] is selected.
B:[100%] is displayed.
C:The Auto Image DensityAuto Image Density
Auto Image DensityAuto Image Density
Auto Image Density
indicator is lit.

3
es
Enter the number
of copies with the
Number keys.
Press the StartStart
StartStart
Start
key.
Never Forget!
Press the Clear ModesClear Modes
Clear ModesClear Modes
Clear Modes key to
clear previously entered settings.
*To check selected
modes, press the
Check ModesCheck Modes
Check ModesCheck Modes
Check Modes key.
A B C

4
Copying to Different Copy Pap
You wish to reduce or enlarge different size
originals onto a certain size copy paper.
In this situation ...
This machine can choose an appropriate reproduc-
tion ratio based on the paper and original sizes
you select (Auto Reduce/Enlarge).
EnlargingEnlarging
EnlargingEnlarging
Enlarging
ReducingReducing
ReducingReducing
Reducing
Example:
5 / "
12
8 / "
12
11"
8 / "
12
11" 14" 17"
8 / " x 11"
12
5 / " x
12
8 / "
12
8/ "x14"
12
11" x 17"
Copy Paper Size
You can check the copy
paper size using the scale
on the exposure glass.
Set the original.
Reduce/Enlarge
Press the [Auto R/E][Auto R/E]
[Auto R/E][Auto R/E]
[Auto R/E]
key.
Use this function:
Tip
11"x17" 8" x 11"
5 " x 8 "
11"x17"
8" x 11"

5
Press the StartStart
StartStart
Start
key.
opy Paper Sizes
In addition, the following functions are available:
Preset Reduce/EnlargePreset Reduce/Enlarge
Preset Reduce/EnlargePreset Reduce/Enlarge
Preset Reduce/Enlarge
ZoomZoom
ZoomZoom
Zoom
Directional Size Magnification(inch)Directional Size Magnification(inch)
Directional Size Magnification(inch)Directional Size Magnification(inch)
Directional Size Magnification(inch)
Directional Magnification(%)Directional Magnification(%)
Directional Magnification(%)Directional Magnification(%)
Directional Magnification(%)
For details, please read the Copy Reference.
Select 8 " x11 "
copy paper with
the keys.

6
Making2-SidedCopies fro
Set the originals
in the document
feeder. Make sure
you set them in the
correct direction.
The optional duplex unit is required to use this function.
You wish to reduce output volume.
In this situation ...
Use the Duplex function to copy onto both
sides of paper.
If you get the orientation
wrong, copies will be
delivered upside down.
1. Identify the top of
the original. 2. Set the original in the document feeder as shown below.
Don't set the original
like this.
Duplex
Use this function:
Tip
Press the [Duplex][Duplex]
[Duplex][Duplex]
[Duplex]
key and make sure
that [1 Sided[1 Sided
[1 Sided[1 Sided
[1 Sided
]]
]]
]
is selected.

7
Select the
orientation.
Press the StartStart
StartStart
Start
key.
es from1-SidedOriginals
1. Press the [Orientn.Orientn.
Orientn.Orientn.
Orientn.] key. 2. Select [TT
TT
Top to Bottomop to Bottom
op to Bottomop to Bottom
op to Bottom] with the
keys. 3. Press the [OK][OK]
[OK][OK]
[OK] key.
Top to
bottom
Top to
top

8
Copying onto Non-standard Pap
Tray 2
Useful Functions
You can set the thin paper, thick paper, transparencies in tray 2.
Set the original.
*If you cannot find your desired
paper size, select “ ”.
For details, see above right.
Pull out tray 2
and insert the
copy paper.
Setthepapersize
selectortothenew
papersize.
Whenyousetthe
thinpaper,thickpaper
transparencies,pushthe
swtich-overlevertoright.

9
ard Paper from Tray 2
Push the paper
tray in until it
stops.
Tip
Setting Non-standard Size Paper in Tray 2
Press the StartStart
StartStart
Start
key.
*When you set standerd
paper in Tray2, push the
switch-over lever to left.
1. Set the paper size selector
to “ ”.
2. Select Tray 2 with the
key.Then press the #
key.
3. Press the [Pap.Size] key.
5. If you cannot find your
desired paper size, select
[Custom Size:], then press
the [OK] key.
8. Press the [Exit] key.
7. Press the [Pap.Type] key.
Then select the paper type
and press the [OK] key.
4. Select your desired paper
size with the or
key.Then press the [OK]
key. Go to step 7.
6. Enter the horizontal and
vertical size. Then press
the [OK] key.

10
Combining Originals int
Set the originals
in the document
feeder.
You wish to save paper or cut down
on filing space.
In this situation ...
The machine can copy multiple 1-sided
originals onto 1 sheet of copy paper.
Setting the Originals in the Document Feeder
43 21
4
3
2
1
Originals reading from left to right
4321
12
21
(4) (3)
Originals reading from top to bottom
* Set the originals upside down.
Example:
Combine
43
12
23
1
4
Use this function:
Tip
Press the
CombineCombine
CombineCombine
Combine
/Series/Series
/Series/Series
/Series key.
Press the
[Combine][Combine]
[Combine][Combine]
[Combine] key.

11
Combining multiple 1-sided originals into one 2-sided copies
als into 1 Copy
4 pages
2-sided copy
8 pages
2-sided copy
16 pages
2-sided
copy 8567
1423
1613 14 15
9 1210 11
2
1
16
15
The optional duplex unit is required.
<Front> <Back>
<Front> <Back>
23
1
4
3
1
4
2
Press the [Exit][Exit]
[Exit][Exit]
[Exit]
key. Press the StartStart
StartStart
Start
key.
Select
[4 Orig. ] with
the keys then
pressthe[OK][OK]
[OK][OK]
[OK] key.
Select the copy
paper with
the keys.

12
StampingMessagesand Pa
You wish to have page numbers or
a message (e.g.CONFIDENTIAL)
printed on copies.
In this situation ...
Use the Preset Stamp function.You can select
the following phrases.
• CONFIDENTIAL • COPY • URGENT
• PRIORITY • For your Information
• PRELIMINARY •For Internal Use Only.
To print page numbers, use the Page Numbering
function.
You can choose from the following numbering
formats:
• P1, P2 · · · • 1/5, 2/5 · · · • – 1 –, – 2 – · · ·
Set the originals.
Stamp/page
Numbering
Use this function:
Press the
StampStamp
StampStamp
Stamp key.
Press the
[[
[[
[
PresetPreset
PresetPreset
Preset
]]
]]
] key and Select
yourdesiredphrase.Then
press the [OK] key.
Press the
[Position][Position]
[Position][Position]
[Position] key.

13
and PageNumbersonCopies
Press the
StartStart
StartStart
Start key.
Change stamp
positionwiththe keys.
Thenpressthe[OK]keytwice.
Select the format ofthe
numberingwiththe keys.
Thenpressthe[OK]key.
Enterstartpage,startNo.
andtotalpageswiththe
NumberKeys.Thenpress
the[OK]keytwice.
Press the
[P[P
[P[P
[Page no.]age no.]
age no.]age no.]
age no.] key.

14
In this situation ...
Press the
Cover/OHP SlipCover/OHP Slip
Cover/OHP SlipCover/OHP Slip
Cover/OHP Slip
SheetSheet
SheetSheet
Sheet key.
Use this function:
Press the
[OHP Slip] key.
Set the
originals
in the document
feeder.
Specify
whethertocopyontoOHPslip
sheetswiththe keys.Then
pressthe[OK]keyandthenpress
the[Exit]key.
OHP Slip
Sheet Inserting OHP Slip Sh
Use the OHP Slip Sheet function to insert
slip sheets.You can also copy the same
original image onto the slip sheets.
You wish to insert slip sheets between
OHP transparencies.

15
Press the
StartStart
StartStart
Start key.
Select the slip
sheet tray.
Tip
Before you use this function, you need to specify “Tray 2” or “Bypass” as the OHP
transparencies tray.
For details, refer to the Copy Reference.
* If your machine does not have the bypass tray, only “Tray 2” can be selected.
* If your machine has the bypass tray,“Bypass” is selected by default.
Set the OHP
transparencies on
the bypass tray or
tray 2.
lip Sheets

16
Stapling While Copying
You don’t have time to staple each
copy set together by hand.
In this situation ...
If your machine has the
finisher, each copy set
can be stapled together
automatically.
Press the
[Sort/Staple][Sort/Staple]
[Sort/Staple][Sort/Staple]
[Sort/Staple] key.
Stapling
Use this function:
Press the [Staple][Staple]
[Staple][Staple]
[Staple]
key.
Set the originals
in the document
feeder.
The optional finisher is required to use this function.

17
ing
Press the [OK][OK]
[OK][OK]
[OK]
key.
Enter the
number of
copies with the
Number keys.
Press the
StartStart
StartStart
Start key.
Orientation of the original Copies
Tip

18
For details, please refer to the following pages in the Copy Reference.
Featuresat
aGlance
UE USA A267

19

A267-6707
UE USA
Printedin Japan
Make copies of this manual and
stick them on the wall.
Set this manual
face down on the
exposure glass.
Press the [Start][Start]
[Start][Start]
[Start] key.
Stick the copies on the
wall.