Sawyer 284D Mounting instructions

A
B
C
D
E
F
Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
F918.834.0318
[e-mail]
P918.834.2550
sawyermfg.com
V1.2
ADJUSTABLE TORCH ARM
Tools Needed for Assembly*
Tools Needed for Assembly*
Warranty
All products manufactured by or for Sawyer
Manufacturing Company are guaranteed against
defects due to faulty workmanship or materials
for twelve months from the date of purchase.
This guarantee is limited to the repair or
replacement of any parts found to be defecve,
and no other liability, expressed, implied or
conngent is assumed.
We appreciate your business!
Congratulaons on your new SAWYER product. We are proud to have
you as our customer and will strive to provide you with the best service
and reliability in the industry. This product is backed by our extensive
warranty and world-wide service network. To locate your nearest
distributor or service agency, please contact us at the phone number
and address listed on the boom of each page.
You are in good company!
Sawyer Manufacturing Company is the world leader in the design and
manufacture of pipeline and welding equipment since 1948. Sawyer
equipment has become a standard in the industry and connues to set
the benchmark for quality and durability.
This user operaon manual has been made to instruct you for the best
use and operaon of your Sawyer product. Your sasfacon with our
products is our main goal. Please read this enre manual carefully
nong all ps, notes and warnings. Safety always comes rst.
About Us
A. Mounng Frame
B. Ring (Torch Adjustment)
C. 37.5-0-37.5 Degree/Bevel Indicator
D. Knob (Posion Adjustment)
E. Square Nut (Bevel Indicator)
F. Knob (Torch Holder Adjustment)
1/2” Wrench
WARNING: Moving parts can snag
and pull. Keep loose items clear.
! !
WARNING
WARNING: Refer to torch
manufacturer for safety sengs.
! !
WARNING
*Not Included
Adjustable Torch
Holder Manual
Models 284D
For Band Type Beveling
Model 206D
Parts Diagram
*Note: Torch not included*

Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
F 918.834.0318
[e-mail]
P918.834.2550
sawyermfg.com
V1.2
Installaon ADJUSTABLE TORCH ARM
1. Slide Mounng Frame (G, Fig. 1.2) into Crawler Donut (x).
A. Tighten knob (xx, Fig. 1) on Crawler
2.Mount hoses to torches according to manufacturer’s specs.
Installaon
Operaon
1. Loosen and ghten adjustment knob to posion assembly on and o
pipe/tube (I, Fig. 3)
Tip: This screw is to adjust free moon of torch arm
*Please refer to the Crawler and Beveling Band manuals
for Installaon of the Beveling Band Machine*
Adjustable Torch Arm Setup
1. Bevel Angle Adjustment.
A. Loosen square nut on bevel indicator. (E, Fig. 4)
B. Adjust Bevel Indicator to desired bevel angle. (C, Fig. 4)
C. Reghten square nut. (E, Fig. 4)
Tip: Use ½” wrench.
2. Install torch into Torch Holder and adjust for desired height
A. Loosen knob on Torch Holder. (C, Fig. 5)
B. Install torch inside Torch Holder. (Fig. 6)
C. Reghten knob. (C, Fig. 5)
3. Posion Adjustment
A. Loosen ring for posion adjustment. (D, Fig. 7)
B. Move assembly to desired posion on Mounng Frame (A).
C. Reghten ring. (D, Fig. 7)
Tip: For best cung have a neutral ame
Open blow-through tab
te: Red hoses= fuel
Fig. 3
Fig. 1
Fig. 1.2
Fig. 6
Fig. 7
Fig. 4
E
xx
I
x
D
G
C
CFig. 5
C