
saxon TKM ScienceSmart Biological Digital Microscope 60x-960x Instruction Manual Page 5
Driver installation
To start, ensure that digital eyepiece is NOT conncted to your PC. Install the program with the
Microsoft-only software CD (provided)
1. Click on “Install DigitalCam”
2. Choose your preferred language.
3. Confirm the “Start copying” query.
4. You will see a screen showing you the “Setup Status”. The program files are now being
copied to your PC. This will take a few minutes.
5. When the “InstallShield Wizard completed” screen pops up, click “Complete”.
The drivers for the digital eyepieces are now installed.
Driver allocation
Reboot your PC then connect the digital eyepiece to your PC’s USB port. The digital eyepiece will
now be allocated to the driver file. A speech bubble will be displayed at the bottom right confirming
the installation. Your digital eyepiece is now ready for use.
Using the digital eyepiece
1. Remove the eyepiece and the barlow lens from the eyepiece holder.
2. Slide the digital eyepiece in the eyepiece holder.
3. Start your PC and connect your digital eyepiece to your PC’s USB port.
Showing and saving images on your PC
1. Start the program Ulead PhotoExplorer 7.0 SE.
2. Select “Video” and “Capture still image” in the menu bar.
3. The screen “Capture still image from video device” will appear. Click “Live view” to see the
image on your PC. If you do not see any images, click on “Setup” and then on “Options”.
Select the option “Capture Device” followed by “Select camera” and “Microcular”.
4. Refocus the mage on your microscope and click “Capture now” to take a photo.
5. The image is now saved on your PC.