SB ShowerGlyde 3 User manual

Bathing transfer bench for easy access
when showering over tubs.
Scan QR code for instruction video
https://sb.care/sg3manual
Left hand bench shown Patent pending

2
Parts
PLEASE FOLLOW THE INSTRUCTION STEP BY STEP
Seat belt
Rails
Hex key
Seatback
Legs
Grab bar
Seatback tube LH
Seatback tube RH
Insert
Splatter
guard
Seat
Contents: Page
Parts 2
Step 1: Bench definition 3
Step 2: Fit rails 3
Step 3: Fit legs 4
Step 4: Fit grab bar 5
Step 5: Seatback assembly installation 5
Seat operation 6
Seat insert positioning 6
Bench height adjustment 7
Exploded parts 7
Intended Usage and Indications 8
Safety Warning 8
Cleaning & Maintenance & Storage 8
Warranty 9
Contact 10

3
Hex key location
Step 2: Fit rails
Step 1: Bench definition
Grab bar goes to wall side
Seat faces the shower head
Shower head
Wall
Wall
Right hand bench
Left hand bench
Grab bar Grab bar
Decide which bench to assemble
Assembly instructions
With seat opening facing
towards you, turn seat upside down.
Lower rails onto rollers

4
Step 3: Fit legs
a: Loosen leg
clamp scews
LH seat shown
RH seat is opposite
e: Check if the clamp is
fully engaged (no gaps
between the clamp &
the rail)
b: Open clamps
to fit over rail
d: Locate leg 4”
(100mm) from rail end
to allow for grab bar
NOTE:
Ensure all screws are fully tightened, using the hex key provided
c: Align rail ends with
leg clamps, equal on
both sides
4”

5
Step 4: Fit Grab bar Place grab bar at rail end
NOTE:
Ensure all screws are fully tightened, using the hex key provided
Step 4: Seatback assembly Installation
Fit seat belt to seatback tubes
and slide into the seat tubes
Fit seatback to seatback
tubes with screws provided

6
Seat operation
Press
slide
1
2
Press
1
2
slide
Seat insert positioning
a: Seat side slide
b: Seat swivel
1: Lift or Press
2: Rotate

7
Bench height adjustment
Adjust leg to suit the tub height.
Ensure the bench rails are level to the floor.
Adjust the legs by pressing the spring button (1)
and sliding the inner leg (2) accordingly.
1
2
1 - grab bar
2 - seat insert
3 - seat splatter guard
4 - seat
5 - seatback
6 - seatback tube LH
7 - seatback tube RH
8 - seatback tube end cap
9 - rail
10 - leg assembly
11 - rail clamp
12 - rubber foot
13 - lower leg
14 - push pin
15 - leg sleeve
16 - rail end cap
17 - seat belt
Exploded parts
NOTE:
Ensure all screws are fully tightened, using the hex key provided
TOLERANCES 公差为:
DECIMALS ANGLES
小数 角度
0 DECIMAL PLACE 0 位十进制数
±0.5mm ±°
2
1 DECIMAL PLACE 1位十进制数
±0.1mm ±1°
2 DECIMAL PLACE 2 位十进制数
±0.05mm ±0.5 °
Colour 颜色:----
Project 参考:
SOBA-A
Name 名称 : ALPHA 3 TOP LEVEL
ASSEMBLY Part Number 零件编号:
PD-000243
Material 材料: ----
Remove all sharp edges
3rd Angle Projection
Finish 表处:----
Rev 版本:-
Scale 比例:1:8
Sheet 比例:
1/ 1
Sheet Size 图纸尺寸:
A3
Date 时间:
2022-07-13
1
2
3
4
56
7
8
9
10 11
11
12
13
15
16
17
14
REVISIONS
REV
版本
DESCRIPTION
描述
DATE
日期
APPROVE
D 审批人
A* - -

8
Intended Usage and Indications:
The ShowerGlyde transfer bath chair is for homecare and out-patient purposes. The
chair is to be used exclusively for assistance during showering or bathing. The
ShowerGlyde bath chair is not designed for long periods of sitting.
Contraindications:
• ShowerGlyde is not recommended for persons with severe immobility or lack of
body control.
• Keep children away from this device and do not let them play with any parts.
Safety Warning
READ ALL SAFETY INFORMATION BEFORE USE
The following must be read before using the ShowerGlyde to ensure safe
operation.
The manufacturer, importer or dealer is not responsible for any injury or damage
resulting from the misuse or inappropriate operation of the ShowerGlyde.
Failure to comply with these safety instructions may result in injury or damage!
• NEVER use this device with individuals who are severely mentally, cognitively,
physically or vision compromised.
• ALWAYS attach safety belt and adjust to a snug fit around users hips.
• NEVER leave a compromised user unattended.
• ALWAYS ensure that the legs are properly adjusted to ensure that the bench is level
side to side and front to back.
• NEVER exceed the maximum weight capacity of 330 lbs. (150kg)
• If any part of the ShowerGlyde requires maintenance please contact
SolutionBased Inc.
Any problems that could affective safe operation of the system MUST be
attended to immediately.
• If you are unsure of how to perform safe transfers into and out of ShowerGlyde
please contact a local therapist or health professional.
• NEVER make adjustments to the ShowerGlyde while user is on chair.
Cleaning & Maintenance & Storage:
Care
In general the ShowerGlyde can be cleaned using a mild conventional cleaning and
disinfecting agent. Simply wipe the chair with clean water and cloth, and then wipe
dry with a clean cloth. Do not use an abrasive scouring agent or cleaners that
contain aggressive solvents (acids, thinners).
Do not use stiff cleaning brushes, as these will damage the plastic surfaces or cause
deposits to build up on the plastic parts and other materials.
Keep the product clean and clean it in regular intervals. In the sensitive areas is
hygiene very important.

9
• Do not oil or grease any parts
• Keep the moving parts free from scale, soap residue and hair by cleaning after use
in the shower.
The cause of accidents or damage may be due to the late detection of wear and /
or improper use, as well as irregular or no maintenance. For safety reasons and for
preventing accidents, the chair must undergo a complete maintenance at least once
a year.
Maintenance
Periodic safety-related controls are needed:
• Check for apparent damage: (cracks, fractures, loose parts).
• Check all screwed connections for tightness.
• Sliding ability, check function of the track (replace if defective).
• Check accessories for defects.
Repair
• If you have questions concerning maintenance and repairs to the chair, then
contact SolutionBased Inc.
• When making repairs, use only original spare parts from SolutionBased Inc.
Observe all advisories concerning guarantee and warranty.
• Never make any unauthorized modifications or conversions to the chair. These will
only adversely affect the safety and function of the chair. In such cases
SolutionBased Inc. assumes no liability!
• Follow all the instructions when ordering spare parts, re-use and product lifetime of
the chair.
• After a complete maintenance or repair of the chair is done, we recommend a
complete cleaning for assuring hygiene. Follow the cleaning instructions.
Warranty
The ShowerGlyde frame has a warranty of 1 year against defects, when noticing/
respecting SolutionBased Inc general terms and conditions as well as the intended
use of the product. Proof of purchase is required.
Unauthorized changes made to the product, without the consent of the manufactur-
er will void the warranty.
Warranty Exclusions
Product or part failure due to normal wear and tear.
Limitations
• Warranty is void if the original serial number tag is illegible.
• Warranty is void if the ShowerGlyde has been subjected to neglect, improper main-
tenance,
storage, cleaning or operation as defined in the Owner’s Manual.
• The warranty is void if the ShowerGlyde is modified in any way.
• This Warranty applies to the original purchaser only and goes into effect on date of
purchase.

10
SolutionBased Inc.
Address: 12405 Montague St. Pacoima CA 91331.
Phone number: (800)-337-6660
Website: www.sb.care