SBC PCD7.D5 RF Series User manual

Saia Burgess Controls |1
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Product serie PCD7.D5xxRF
Operating Instructions for the HMTL5 panels
User's Manual

Saia Burgess Controls
2 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF

Saia Burgess Controls | 3
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Table of Contents
0 Table of Contents ............................................................................................................ 3
0.1 Document Process ............................................................................................. 4
0.2 Trademarks ......................................................................................................... 4
1 Introduction ..................................................................................................................... 5
2 Product Overview ........................................................................................................... 6
3 Standards and Approvals .............................................................................................. 7
3.1 ProductIdentication.......................................................................................... 8
4 Technical Specications ................................................................................................ 9
4.1 Environmental conditions .................................................................................... 9
4.2 Approvals ............................................................................................................ 9
4.3 Electromagnetic Compatibility (EMC) ................................................................. 10
4.4 Durability information .......................................................................................... 10
4.5 Solvent resistance .............................................................................................. 10
5 Technical Data ................................................................................................................. 11
5.1 Dimensions ......................................................................................................... 12
5.2 Installation Environment ..................................................................................... 14
5.3 Safety instruction ................................................................................................ 15
5.4 Installation Procedure ......................................................................................... 15
6 Connections .................................................................................................................... 16
6.1 PCD7.D543RF .................................................................................................... 16
6.2 PCD7.D570RF .................................................................................................... 16
6.3 Ethernet Port ....................................................................................................... 17
7 Power Supply, Grounding and Shielding ..................................................................... 18
8 Cleaning faceplates ........................................................................................................ 19
9 Touchscreen calibration ................................................................................................ 19
10 Unpacking and Packing Instructions ............................................................................ 20
A Appendix ......................................................................................................................... 21
A.1 Safety Guide ....................................................................................................... 21
A.2 Contact ............................................................................................................... 22

Saia Burgess Controls
4 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Document Process | Trademarks
0.1 Document Process
Version Updated Published Comments
ENG01p 2020-04-22 - - New Document
ENG01 2020-06-05 - Ch. 4.2 - Approvals added
0.2 Trademarks
Saia PCD®is a registered trademark of Saia-Burgess Controls AG.
Technical changes are subject to the latest technical developments.
Saia-Burgess Controls AG, 2020. © All rights reserved.
Third-party brands and names are the property of their respective owners.
Published in Switzerland

Saia Burgess Controls | 5
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Introduction
1 Introduction
This operational guidelines describes information which relates to the device, installation,
transportation, storage, assembly, use and maintenance.
This operational guidelines describes the main features of the Saia PCD7.D5xxRF HTML5
panels.
It contains the following models:
Type Description
PCD7.D543RF Operator interface with TFT color 4.3” widescreen display touchscreen
PCD7.D570RF Operator interface with TFT color 7” widescreen display touchscreen

Saia Burgess Controls
6 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Product Overview
2 Product Overview
The PCD7.D5xxRF HTML5 HMI products combine state-of-the-art features and top perfor-
mancewithanoustandingdesign.Theyhavebeendesignedtooeranoutstandingprice/
performance ratio for challenging applications.
They are the ideal choice for HMI applications including factory and building automation.
●PCD7.D5xxRF products have been designed to run powerful HMI applications.
●Powerful browser with industry standard Web engines.

Saia Burgess Controls | 7
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Standards and Approvals
3 Standards and Approvals
The products have been designed for use in an industrial environment in compliance with
the2014/30/EUEMCDirective.
The products have been designed in compliance with:
EN 61000-6-4 EN 55011 Class A
EN 61000-6-3 EN 55022 Class B
EN 61000-6-2 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 60079-0
EN 60079-7
EN 60079-11
The installation of these devices into the residential, commercial and light-industrial envi-
ronments is allowed only in the case that special in measures are taken in order to ensure
conformity to EN 61000-6-3.
The products are in compliance
withtheRestrictionsonCertainHazardousSubstances(RoHS)Directive2011/65/EU
In compliance with the above regulations the products are CE marked.
Special instruction for use
■The equipment shall only be used in an area of not more than pollution degree 2, as
denedinIEC/EN60664-1.
■The equipment shall be installed in an enclosure that provides a degree of protection
notlessthanIP54inaccordancewithIEC/EN60079-7.
■Transient protection shall be provided that is set at a level not exceeding 140 % of the
peak rated voltage value at the supply terminals to the equipment.

Saia Burgess Controls
8 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
ProductIdentication
3.1 Product Identication
Theproductmaybeidentiedthroughaplateattachedtotherearcover.Youwillhaveto
know the type of unit you are using for correct usage of the information contained in the
guide.
Anexampleofthisplateisshowninthegurebelow:
Note: the PCD7.D570RF label is used as an example for PCD7.DxxRF Series
Saia-Burgess Controls AG
Bahnhofstrasse 18
3280 Murten, Switzerland
PCD7.D570RF
P.N.: ESMA107BCA301
product model name PCD7.D570RF
product part number ESMA107BCA301
year/weekofproduction 2017
serial number AA000 xxxx123456789AA
version id of the product xxxxxxxxxxxxxxx
manufacturer address Saia-Burgess Controls AG
Bahnhofstrasse 18
3280 Murten, Switzerland

Saia Burgess Controls | 9
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
TechnicalSpecications|Environmentalconditions
4 Technical Specications
Touchscreen technology Resistive
RTC backup Supercapacitor
Fuse Automatic
Recipe memory Flash
Hardware clock Clock/Calendarwithsupercapacitorback-up
Accuracy RTC (at 25°C) <100 ppm
4.1 Environmental conditions
Operating temperature
(surrounding air temperature)
0 … +50°C (vertical installation)
Plug-in modules and USB devices
may limit max temperature to +50°C
EN 60068-2-14
Storage temperature –20 … +70°C EN 60068-2-1
EN 60068-2-2
EN 60068-2-14
Operating and storage
humidity
5 … 85 % RH not-condensing EN 60068-2-30
Vibrations 5 … 9 Hz, 7 mm p-p
9 … 150 Hz, 1 g
EN 60068-2-6
Shock ± 50 g, 11 ms, 3 pulses per axis EN 60068-2-27
Protection class IP66 front panel * EN 60529
Pollution degree environment 2
* The front face of the SBC unit, installed in a solid panel, has been tested using conditions equivalent to the
standards shown in the “Environmental conditions”. Even though the level of resistance SBC unit is equiv-
alenttothesestandards,oilsthatshouldhavenoeectonthePCD7.D5xxRFcanpossiblyharmtheunit.
This can occur in areas where either vaporized oils are present, or where low viscosity cutting oil are al-
lowed to adhere to the unit for long periods of time. If the front face protection sheet on the PCD7.D5xxRF
becomespeeledo,theseconditionscanleadtotheingressofoilintotheunitandseparateprotection
measures are suggested.
If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the
panel, the original level of the protection cannot be guaranteed.
4.2 Approvals
CE Emission EN 61000-6-4, Immunity EN 61000-6-2 for installation in industrial environments.
Emission EN 61000-6-3, Immunity EN 61000-6-1 for installation in residential environments.
UL ANSI/UL508

Saia Burgess Controls
10 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Electromagnetic Compatibility (EMC) | Durability information | Solvent resistance
4.3 Electromagnetic Compatibility (EMC)
Radiated disturbance test Class A EN 55011
Electrostatic discharge
immunity test
8 kV (air electrostatic discharge)
4 kV (contact electrostatic discharge)
EN 61000-4-2
Radiated, radio-frequency,
electromagnetic eld
immunity test
80MHz…1GHz,10V/m
1,4GHz…2GHz,3V/m
2GHz…2.7GHz,1V/m
EN 61000-4-3
Burst immunity test ± 2 kV dc power port
± 1 kV signal line
EN 61000-4-4
Surge immunity test ± 0,5 kV dc power port (line to earth)
± 0,5 kV dc power port (line to line)
± 1 kV signal line (line to earth)
EN 61000-4-5
Immunity to conducted
disturbances inducted by
radiofrequency eld
0.15 ÷ 80 MHz, 10 V EN 61000-4-6
Voltage dips, short
interruptions and voltage
variations immunity test
Port: AC mains; Level:
100% duration: 1 cycle and 250 cycles (50 Hz)
40% duration: 10 cycles (50 Hz)
70% duration: 25 cycles (50 Hz)
Phase: 0°…180°
Test executed on the 230 Vac side of the Power Supply EN 61000-4-11
4.4 Durability information
Backlight service life
(LED type)
40000 Hrs. or more
(LED type) (Time of continuous operation until the brightness of the
backlight reaches 50% of the rated value when the
surrounding air temperature is 25°C) - see Note 1
Front foil
(without direct exposure to
sunlight or UV)
10 years if the surrounding air temperature is 25°C
UV Resistance Indoor applications: After 300 hours cycled humidity in
QUV accelerated weathering, some yellowing and
brittleness may be present.
Note 1: Extended use in environments where the surrounding air temperature is 40°C or higher may
degradebacklightquality/reliability/durability.
4.5 Solvent resistance
Contactfor1/2hourat21°C,Novisibleeect:Acetone,ButylCellosolve,Cyclohexanone,
Ethyl Acetate, Hexane, Isopropyl Alcohol, MEK, Methylene Chloride, Toluene, Xylene Con-
tactfor24hoursat49°C,Novisibleeect:Coee,Ketchup,LemonJuice,Mustard(slight
yellow stain), Tea, Tomato juice.
Touchscreen reliability > 1 milion operations

Saia Burgess Controls | 11
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Technical Data
5 Technical Data
Model PCD7.D543RF PCD7.D570RF
Display /
Backlight TFTColor/LED TFTColor/LED
Colors 64K 64K
Resolution 480 × 272 800 × 480
Diagonal (inches) 4.3” widescreen 7” widescreen
Dimming yes yes
Chipset ARM Cortex-A8 - 1 GHz ARM Cortex-A9 dual core - 800 MHz
Operating System Linux RT Linux RT
User memory 4 GB Flash 4 GB Flash
RAM 512 MB DDR 1 GB DDR
Ethernet port 10/100Mbit 10/100Mbit
USB port Host interface version 2.0
max. 500 mA
Host interface version 2.0
max. 500 mA
Real Time Clock yes yes
Voltage 24 Vdc 24 Vdc
Current rating
(at 24VDC) 0,25 A 0,30 A
Weight 0,4 Kg 0,875 Kg
(*) 10…32 Vdc
ForapplicationsrequiringcompliancewithEN61131-2andspecicallyinreferenceto10msvoltagedips,
the power supply range voltage is 18…32 Vdc.

Saia Burgess Controls
Cut out
12 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Dimensions
MODEL A B L H D T
PCD7.D543RF 136mm/5,35” 196mm/3,78” 147mm/5.78” 107 mm/4,21” 29 mm/1,14 5 mm/0,19”
5.1 Dimensions

Saia Burgess Controls
A
B
L
H
Cut out
| 13
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Dimensions
MODEL A B L H D T
PCD7.D570RF 176 mm/6,93” 136 mm/5,35” 187 mm/7,36” 147 mm/5,79” 29 mm/1,14” 5 mm/0,19”

Saia Burgess Controls
14 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Installation Environment
5.2 Installation Environment
Inordertomeetthefrontpanelprotectionclassications,properinstallationprocedure
must be followed:
■ thebordersofthecutoutmustbeat
■ screwupeachxingscrewuntilthebezelcornergetincontactwiththepanel
■the cutout for the panel must be of the dimensions indicated in this manual.
The equipment is not intended for continuous exposure to direct sunlight.
Thismightacceleratetheagingprocessofthefrontpanellm.
The equipment is not intended for installation in contact with corrosive chemical com-
pounds.Checktheresistanceofthefrontpaneltoaspeciccompoundbeforeinstallation.
Do not use tools of any kind (screwdrivers, etc.) to operate the touch screen of the panel.
The IP66 is guaranteed only if:
■ maxdeviationfromtheplanesurfacetothecut-out:≤0.5mm
■thickness of the case where is mounted the equipment: from 1,5 mm to 6 mm
■ maxsurfaceroughnesswherethegasketisapplied:≤120um
A. PCD7.D5xxCF
B. Installation cut-out

Saia Burgess Controls | 15
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Safety instruction | Installation Procedure
5.4 Installation Procedure
Placethexingbracketscontainedinthexingkitasshowningurebelow.
5.3 Safety instruction
ATTENTION For all installation notes, please refer to the Installation Guide
provided with the product.
CAUTION
Tighteningtorque:75Ncmorscreweachxingscrewuntilthebezelcornergetsin
contact with the panel.

Saia Burgess Controls
16 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Connections
6 Connections
6.1 PCD7.D543RF
1. Serial port - not supported
2. Ethernet Port
3. USB Port
4. Power Supply
Fig. 6.1
1. Power Supply
2. Ethernet Port
3. USB Port
Fig. 6.2
6.2 PCD7.D570RF

Saia Burgess Controls | 17
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Ethernet
6.3 Ethernet Port
TheEthernetporthavetwostatusindicators.Pleaseseedescriptioningure.
Yellow Green
1 8
Green Yellow
ON OFF No LAN cable connected
BLINK (link active) ON LANcableconnectedwith100Mbit/slink
BLINK (link active) OFF LANcableconnectedwith10Mbit/slink

Saia Burgess Controls
18 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Power Supply, Grounding and Shielding
7 Power Supply, Grounding and Shielding
Thepowersupplyterminalblockisshowninthegurebelow.
Fig. 7.1
DCPowerConnector-AWG24wiresize-R/CTerminalBlocks(XCFR2),
Female pitch 5.08 mm, torque 4.5 lb-in.
3 conductor 1,5 mm² wire size minimum, minimum temperature conductor rating 105°C.
Note: Ensure that the power supply has enough power capacity
for the operation of the equipment.
The unit must always be grounded to earth with 1,5 mm² wire size minimum. Grounding
helpslimittheeectsofnoiseduetoelectromagneticinterferenceonthecontrolsystem.
Earth connection will have to be done using either the screw or the faston terminal located
near the power supply terminal block. A label helps identify the ground connection.
Also connect to ground the terminal 3 on the power supply terminal block.
Thepowersupplycircuitmaybeoatingorgrounded.Inthelattercase,connectto
groundthepowersourcecommonasshowningure(seebelow)withadashedline.
Whenusingtheoatingpowerscheme,notethatthepanesinternallyconnectsthepower
commontogroundwitha1MΩresistorinparallelwitha4,7nFcapacitor.
The power supply must have double or reinforced insulation.
The suggested wiring for the power supply is shown below.
Fig. 7.2
All the electronic devices in the control system must be properly grounded. Grounding
must be performed according to applicable regulations.

Saia Burgess Controls | 19
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Cleaning faceplates | Touchscreen calibration
8 Cleaning faceplates
The equipment must be cleaned only with a soft cloth and neutral soap product. Do not
use solvents.
9 Touchscreen calibration
PCD7.D5xxRF HMI products support calibration of the interface. To start calibration pro-
ceed as follow:
1. Use the “tap-tap” procedure at boot (this procedure consists in tapping the surface of
the touchscreen during the device power-up phase. Tapping frequency must be high.
Youhavetostarttappingthetouchscreenassoonaspowerhasbeenappliedtothe
device). When the sequence has been recognized, the system shows the message:
“TAP-TAP DETECTED”.
2. Release touch and wait few seconds until the message
“ENTERINGSYSTEMSETTINGS”appears
3. Press and hold touch for few seconds for selecting
“TOUCHSCREEN CALIBRATION”.

Saia Burgess Controls
20 |
27-672 ENG01 – User's Manual for the HMTL5 panels PCD7.D5xxRF
Unpacking and Packing Instructions
10 Unpacking and Packing Instructions
To repack the unit, please follow the instructions backwards.
Fig. 10.1: PCD7.D543RF, PCD7.D570RF
Fig. 10.2: PCD7.D510RF
Other manuals for PCD7.D5 RF Series
1
This manual suits for next models
2
Table of contents