SCE ARK36 User manual

Padlock Door Handle With Large Door Rod Kit
1
PADLOCK-DOOR-HANDLE
CUTOUT DETAIL
INSTALLATION INSTRUCTIONS FOR SCE DOOR HARDWARE
ON ENCLOSURES THAT DO NOT HAVE HANDLES, OR
PROVISIONS FOR HANDLES.
1. LOCATE AND DRILL HANDLE AND ROD GUIDE
MOUNTING HOLES.
2. INSTALL ROD GUIDES
3. MEASURE DOOR OPENING HEIGHT.
DOOR ROD CUT LENGTH =
(DOOR OPENING HEIGHT/2) - 2.50”
DOOR ROD ASSEMBLY LENGTH =
(DOOR OPENING HEIGHT/2) + 2.33”
4. INSTALL DOOR HANDLE AND LATCH PLATE.
5. INSERT DOOR ROD THROUGH THE ROD GUIDE BEFORE
ASSEMBLING THE RAMP SHOES.
6. INSTALL RAMP SHOES TO THE DOOR RODS AND INSERT
THE 10-32 SET SCREW. THEN ATTACH DOOR RODS TO
THE LATCH PLATE.
DOOR INTERIOR VIEW
OPTIONAL ROD KITS
“SCE-ARK36” LARGE DOOR ROD KIT FOR 2 OR 3
POINT LATCHING
“SCE-ARK39”LARGE DOOR ROD KIT FOR 2 OR 3
POINT LATCHING
INSERT STOP PIN HERE
HANDLE TURNS CLOCKWISE
INSERT STOP PIN HERE
HANDLE TURNS COUNTER CLOCKWISE

Padlock Door Handle With Large Door Rod Kit
2
PADLOCK-DOOR-HANDLE
RECOMMENDED HANDLES
-SCE-PH5 (5.00 PADLOCKABLE HANDLE)
-SCE-PCH5 (5.00 PADLOCKABLE SLOTTED COIN PROOF HANDLE)
-SCE-PCH5-7SC (5.00 PADLOCKABLE 7MM SQUARE COIN PROOF HANDLE)
-SCE-PKH5 (5.00 PADLOCKABLE KEY LOCKING HANDLE)
-SCE-PH7 (7.00 PADLOCKABLE HANDLE)
-SCE-PCH7 (7.00 PADLOCKABLE SLOTTED COIN PROOF HANDLE)
-SCE-PCH7-7SC (7.00 PADLOCKABLE 7MM SQUARE COIN PROOF HANDLE)
-SCE-PKH7 (7.00 PADLOCKABLE KEY LOCKING HANDLE)
2.50 x .625
ALUMINUM FLAT BAR
DOOR ROD GUIDE
FLANGE NUT
SET SCREW
DOOR ROD GUIDE
RAMP SHOE
¼ -20 x ½ ARC STUD
OR DRILL
∅
0.25 FOR
¼ -20 FASTENER
AND SEALING WASHER
DOOR ROD ADAPTER
SET SCREW
FLANGED BOLT
DOOR HANDLE CAM
LEFT HAND LARGE
3PT CAM
DOOR HINGED
ON LEFT
DOOR HINGED
ON RIGHT
RIGHT HAND LARGE
3PT CAM