OPERATING INSTRUCTIONS
1. Connect the orange lead to your power supply
(brown to +, blue to -).
2. Fill the tank with water.
THE PUMP
The pump can be used for quite long periods of time when inwater, but it is
suggested that running periods should be restricted to a maximum of 15 minutes.
To obtain efficient running and maximum life note the following points:
-Before switching on, place the pump in water and shake for a few
seconds in a horizontal or inverted position to release air.
-Check that all hose connections are airtight.
-Check that the power supply is at or close to 12 volts. Reduced voltage
(i.e. a weak battery) or wire of less than 1.5 thickness will give a
reduced pump performance.
-Ensure that there is adequate ventilation in the tank to prevent a
vacuum building up, causing restricted flow. Any cap fitting must have
ventilation of at least 3/16” (5mm) diameter.
-The pump is guaranteed for 1 year against defects in materials and
workmanship provided that the pump case in no opened or the pump
otherwise abused.
WARRANTY
Your unit is guaranteed for 12 months from date of purchase. This guarantee
covers faults which may occur from defective parts or manufacture.
If you are missing your free brochure contact us on
01473 328272, email sales@schsupplies.co.uk, or
visit our website www.schsupplies.co.uk