GENERAL
The surface should have any unwanted debris removed before sweeping. (The
tray on the sweeper is useful for debris collection)
The purpose of brushing at regular intervals, when conditions allow, will help to
keep the infill mobile and the pile de-compacted.
Never tow the brushin the working position on any surface other than the surface
it was intended for.
OPERATION
1. The brush is transported to the working area upside down and
connected to the towing vehicle with the rigid tow bar.
2. At the brushing area, disconnect the brush from the towing vehicle and
turn it onto its brushes
3. Re-connect the brush to the towing vehicle using the connecting chain.
4. Commence brushing. Never travel at such a speed that allows the
brush to ‘bounce’. The wandering action of the chain connection allows
the brush to swing gently from side to side.
MAINTENANCE
Should the brushes become soiled, wash with water (pressure wash if
available).
Check all fixings for tightness twice a year.