Schaller FSA User manual

78,0°F | 6,16% | 456kg/m
3
| -27,3td | 0,64aw | 51,9%r.H. | 14,8%abs | 100,4g/m
2
| 09m/s | 4,90Ugl | 1
Operating Manual
Always read this operating manual before using the FSA!
FSA grain moisture analyser
for determination of water content of whole grain
Moisture meter
Version 2.7

FSA Operating Manual
Page 2
Your FSA at a glance
Overview ungauged device
No. Name
1 Material funnel
2 Drawer
3 Cold appliance plug
4 Type label with serial number
5 Ethernet port
6 USB port
7 LCD display
8 Integrated printer
1
2
3
7
8
4
5
6

Page 3
Overview gauged device
No. Name
1 Material funnel
2 Drawer
3 Gauging seal
4 Cold appliance plug
5 Type label with serial number
6 Ethernet port
7 USB port
8 LCD display
9 Integrated printer
1
2
3
8
9
5
6
7
4

FSA Operating Manual
Page 4
Overview top of the device - ungauged/gauged
No. Name
1 On/Off button
2 Gauging badge (only for gauged devices)
3 Material funnel
4 LCD display
5 Integrated printer
6 Device name
6
5
3
4
1
6
5
3
4
1
2

Page 5
The menus
The device has three different menus: home, measuring window and main menu:
Home menu
No. Name
1 Main menu
2 Time and date
3 Version number
4 Measuring window
1
2
4
3

FSA Operating Manual
Page 6
Measuring window ungauged device
No. Name
1 Switching off
2 Main menu
3 Home
4 Starting the measurement
5 Product selection
6 Supplier management
7 Printing the current measurement (see "5.4
Printing measured values")
8 Time and date
9 Note to empty the drawer
10 Supplier information
11 Material temperature
12 Hectolitre weight
13 Material moisture
14 Product name
8
13
9
2
4
5
6
7
12
11
10
1
3
14

Page 7
Measuring window gauged device
No. Name
1 Switching off
2 Main menu
3 Home
4 Starting the measurement
5 Product selection
6 Supplier management
7 Printing the current measurement (see "5.4
Printing measured values")
8 Time and date
9 Note to empty the drawer
10 Gauging information for selected product
11 Supplier information
12 Material temperature
13 Hectolitre weight
14 Material moisture
15 Gauging version
16 Product name
8
14
9
2
4
5
6
7
13
12
11
1
3
16
15
10

FSA Operating Manual
Page 8
Main menu
No. Name
1 Switching off
2 Main menu
3 Home
4 Language
5 Memory location
6 Settings
7 Gauging (only accessible for gauging authority)
8 Information
9 Memory
10 User data
11 Administrator
8
9
2
5
6
7
10
1
3
4
11

Page 9
Table of contents
Your FSA at a glance ��������������������������������������������������������������������� 2
Overview ungauged device .........................................................................2
Overview gauged device .............................................................................3
Overview top of the device - ungauged/gauged ..........................................4
The menus ..................................................................................................5
1� Introduction ������������������������������������������������������������������ 12
1.1 Information about this operating manual ...................................12
1.2 Limitation of liability ..................................................................12
1.3 Symbols used in this manual ......................................................12
1.4 Customer service .......................................................................13
2� For your safety �������������������������������������������������������������� 14
2.1 Proper use .................................................................................14
2.2 Improper use .............................................................................14
2.3 User qualications .....................................................................14
2.4 Danger from electric current ......................................................15
2.5 General safety information ........................................................15
3� On receipt of your device �������������������������������������������� 16
3.1 Taking the device out of its packaging .......................................16
3.2 Making sure that all of the components have been included ......16
3.3 Removing the transport lock ......................................................16
3.4 Setting up the device .................................................................17
4� Using the device - Basics ���������������������������������������������� 18
4.1 Inserting the drawer ..................................................................18
4.2 Plugging in the device ...............................................................18
4.3 Switching the device on .............................................................18
4.4 Taking a measurement ...............................................................18
4.5 Switching the device off ............................................................18

FSA Operating Manual
Page 10
5� The measuring process ������������������������������������������������� 19
5.1 Preparing a measurement ..........................................................19
5.2 Taking a measurement ...............................................................19
5.3 Managing supplier data .............................................................20
5.4 Printing measured values ...........................................................21
5.5 Viewing all measuring data (data storage) ................................23
5.6 Deleting all measuring data (data storage) (only ungauged) .......23
6� Product types ���������������������������������������������������������������� 24
6.1 How moisture is dened ............................................................25
6.2 Notes for comparative measurement with oven-drying method .25
6.3 Note regarding tolerances for deviations ....................................26
7� Using the LogMemorizer program ������������������������������ 27
7.1 Installing / opening the program ................................................27
7.2 Exporting measured values to a computer ..................................27
8� Data access via REST interface ������������������������������������� 29
8.1 Determining the network address of the device .........................29
8.2 Retrieving measurement data via a browser ...............................29
9� Checking the device's status ���������������������������������������� 30
10. Conguringthedevice������������������������������������������������� 31
10.1 Selecting a language .................................................................31
10.2 Adjust the date/time .................................................................31
10.3 Selecting °C/°F ...........................................................................32
10.4 Device test .................................................................................32
10.5 My device ..................................................................................32
10.6 Log le ......................................................................................33
10.7 Update ......................................................................................34
10.8 Switch-off time ..........................................................................34
10.9 Special products ........................................................................35

Page 11
11� Cleaning and maintenance ������������������������������������������ 37
11.1 Care instructions ........................................................................37
11.2 Cleaning the device ...................................................................37
11.3 Replacing the printer paper roll ..................................................38
11.4 Checking the calibration ............................................................39
12� Faults ����������������������������������������������������������������������������� 41
12.1 Possible error messages .............................................................43
12.2 Transporting the device ..............................................................45
12.3 Storing the device ......................................................................46
12.4 Disposing of the device ..............................................................46
13� Device information ������������������������������������������������������� 47
13.1 CE declaration of conformity .....................................................47
13.2 Technical data ............................................................................51

FSA Operating Manual
Page 12
1. Introduction
1.1 Information about this operating manual
This operating manual is designed to enable you to use the FSA grain moisture analyser
safely and effectively. It is part of the device, has to be stored nearby and must be
easily accessible to users at all times.
All users are required to carefully read and make sure that they have understood this
operating manual before using the FSA grain moisture analyser. All of the safety and
operating instructions detailed in this manual have to be observed to ensure the safety
of the device.
1.2 Limitation of liability
All of the information and instructions provided in this operating manual have been
compiled on the basis of the current standards and regulations, the state of the art,
and the extensive expertise and experience of Schaller Messtechnik GmbH.
Schaller Messtechnik GmbH does not accept any liability for damage associated with
the following, which also voids the warranty:
• Non-observance of this operating manual
• Improper use
• Inadequately qualified users
• Unauthorised modifications
• Technical changes
• Use of unapproved spare parts
This fast measuring procedure can be affected by a range of different factors. For this
reason, we recommend periodically checking the device’s measurements with a stan-
dardised oven-drying method.
We, as the manufacturer, do not accept any liability for any incorrect measurements
and associated consequential damage.
1.3 Symbols used in this manual
All of the safety information provided in this manual is shown with a corresponding
symbol.

Page 13
WARNING
It is essential to observe this warning. Non-compliance can lead to serious
irreversible or fatal injury.
CAUTION
It is essential to observe this warning. Non-compliance can lead to injury.
ATTENTION
It is essential to observe this warning. Non-compliance can lead to damage to
property or equipment.
iInformation
This symbol indicates important information that enables users to use the de-
vice more efficiently and cost-effectively.
1.4 Customer service
For technical advice, please contact our customer service department at
Schaller Messtechnik GmbH
Max-Schaller-Straße 99
A - 8181 St.Ruprecht an der Raab
Telephone: [phone]
Fax: [phone] - 901
E-mail: [e-mail]
Internet: www.humimeter.com
© Schaller Messtechnik GmbH 2022

FSA Operating Manual
Page 14
2. For your safety
The device complies with the following European directives:
• Restriction of Hazardous Substances in Electrical and Electronic Equipment
(RoHS)
• Electrical equipment (Low Voltage Directive, LVD)
• Electromagnetic compatibility (EMC)
• Machinery
The device corresponds to state-of-the-art technology. However, it is still associated
with a number of residual hazards.
These hazards can be avoided through strict observance of our safety information.
2.1 Proper use
• Easy to use device for quickly measuring the moisture content of grain
• The device must only be used for taking measurements on the products defined
in the following sections of this manual (see "6. Product types").
2.2 Improper use
• The device must not be used in ATEX areas.
• The device is not suitable for measuring frozen material or material with a tem-
perature of less than 5°C (gauged) and more than +40 °C (gauged).
• The device is not suitable for measuring frozen material or material with a tem-
perature of less than 10°C (ungauged) and more than +50 °C (ungauged).
• The material must be clean or free of heavy contamination and/or foreign mat-
ter.
• The device is not waterproof and must be protected from water and fine dust
(IP40).
2.3 User qualifications
The device must only be operated by people who can be expected to reliably take the
measurements. The device must not be operated by people whose reaction times may
be slowed due to, e.g. the use of drugs, alcohol or medication.
All persons using this device must have read, understood and follow the instructions
provided in the operating manual.

Page 15
2.4 Danger from electric current
WARNING
Electric shock
Danger to life due to electric shock when operating with a defective mains
cable or defective device.
►Disconnect the device from the power supply and secure it against being
switched on again.
Observe the following safety instructions to avoid hazards from electric current:
• Do not use a damaged power cable.
• A damaged power cable may only be replaced by the manufacturer, customer
service or a similarly qualified person.
• Do not open any firmly screwed covers from the housing of the unit.
• Do not use the device if it shows any externally visible damage, e.g. to the
housing, controls or connection cables, or if it malfunctions.
• A defective device may only be replaced by the manufacturer, customer service
or a similarly qualified person. Do not repair the device yourself.
• Do not make any changes to the device, its components or accessories.
2.5 General safety information
The following safety information has to be observed at all times to avoid damage to
objects and injury to people:
• Do not reach into the interior of the device during operation.
• Keep the device and its power cable away from children under the age of 8.
• Disconnect the device from the power supply if it is to be left unattended for an
extended period of time.
• Attention: Danger of tipping! Ensure that the device stands on a stable and level
surface.
All of the device’s technical features have been inspected and tested before delivery.
Every device has a serial number. Do not remove the tag with the serial number.

FSA Operating Manual
Page 16
3. On receipt of your device
3.1 Taking the device out of its packaging
• Take the device out of its packaging.
• Next, make sure that it is not damaged and that no parts are missing.
• Do not discard the packaging! In case of shipping the device, authorize a freight
forwarder and use the original packaging. If your device has been delivered with
an additional overpack (bigger cardboard box), always ship the device packed in
both cardboard boxes.
3.2 Making sure that all of the components have been included
Make sure that all of the components have been included by checking the package
contents against the following list:
• FSA incl. transport lock
• drawer
• Schuko cable (CEE 7/7)
• measuring cup 0.5 litre
• 5 pcs. of paper rolls for printer
• Operating manual
Optional accessories:
• USB stick with LogMemorizer software (measuring data recording and analysing
software) and network cable - Described in a separate operating manual
• Test medium
• Laboratory analysis for creating a new characteristic curve (product type)
• Entry of an existing characteristic curve
3.3 Removing the transport lock
• Devices of serial number 0050 or higher are deli-
vered with a transport lock (screw figure 1).
• Before starting the first measurement, the transport
lock has to be removed.
»To loosen the screw, the device may only be tilted
onto the rear side carefully.
1

Page 17
• Remove the marked screw (figure2).
»Keep the screw in a safe place, as only the original
screw has to be used for any further shipment.
• Before each transport, insert the screw again (figure3).
• It is important that the screwing is done without any
force. It should be screwable without much effort.
»If this is not possible, please contact Schaller Messtech-
nik GmbH.
3.4 Setting up the device
Note the following:
• Do not leave the device out in the rain. The device and its
measuring chamber are not waterproof.
• Do not position the device in damp rooms.
• Place the device on a stable, level and dry surface.
• Do not expose the device to large quantities of dust.
• Do not expose the device to extreme temperatures.
• Protect the device from strong mechanical shocks and loads.
• Keep a sufficient distance of about 10 cm from the wall and other objects.
• Ensure that the power cable cannot be damaged by edges or hot surfaces.
CAUTION
Danger of tipping
Risk of injury due to tipping device
►Place the device on a stable and level surface.
2
3

FSA Operating Manual
Page 18
4. Using the device - Basics
4.1 Inserting the drawer
• Make sure that the transport lock has
been removed (figure4).
• Slide the drawer into the device (figure5).
4.2 Plugging in the device
1. Make sure that the socket you want to
use has the same electrical voltage as described
on the name plate of the device.
2. Plug the power cable into the device (figure6).
3. Plug the power cable into the power socket.
4.3 Switching the device on
»After plugging in the power cable, the device switches on automatically Or
• Press .
• The device will now power up.
»This may take a few seconds.
4.4 Taking a measurement
• For information on how to take a measurement, see section "5. The measuring
process".
4.5 Switching the device off
• Press or .
• On the display appears the query of figure7.
• Confirm by pressing Yes.
4 5
6
7

Page 19
5. The measuring process
5.1 Preparing a measurement
To do so: The display has to show the measuring
window (figure8).
1. Press the button Product.
2. Now select the required product type from all
the types stored in the device (figure 9).
»A measuring process without selecting a
product is not possible!
3. Before starting the measurement, you can
create and select different supplier names
(see "5.3 Managing supplier data").
»The supplier's data is saved together with the
measuring data and can also be found at the printout.
»The supplier's data can be modified or deleted at any
time.
4. Now fill the material funnel with the material sample
(approx. 450 ml) (figure 10).
»If there is not enough material in the measuring chamber, a new measurement
has to be started.
5.2 Taking a measurement
• Press the button Start . The measuring
procedure will take about 30 seconds.
• As soon as the measurement is completed,
the display shows the measuring results
(figure 11). Supplier's data, barcode and a
note have to be entered before starting a
measurement.
• Finally empty the drawer. Only then a new measurement can be started.
8
9
10
11

FSA Operating Manual
Page 20
ATTENTION
Crushing hazard
Risk of crushing due to the movement of the flap in the material funnel
►Keep any parts of the body away from the material funnel of the device.
iInformation - Measuring accuracy
To increase the measuring accuracy, take three measurements of the same
material.
iInformation - Incorrect readings
Select the right product for your material and do not mix grain of different
types. This prevents taking incorrect readings (see "12. Faults").
5.3 Managing supplier data
• To select or manage the suppliers stored on
the device press the button Supplier.
»The first line is empty. This line can be used
when no supplier's name should be displayed
(figure 12).
»If no other supplier is selected, this "empty
supplier" is used by default and no supplier data is displayed.
• In addition to the supplier data, further information can be added.
»For that purpose, the fields Barcode and Measuring note can be used.
5.3.1 Creating a new supplier
• Press the button New.
• Enter the name of the supplier.
»Additionally, further information about the
supplier can be stored.
• Confirm by pressing Ok.
12
13