
Schertler SA
Via Beroldingen 18
6850 Mendrisio
Switzerland
T +41 (0)91 6 0 07 10
F +41 (0)91 6 0 07 11
info@schertler.swiss
www.schertler.swiss
Facebook @schertler.sa
Instagram @schertleraudio
Youtube @Schertler SA
#shareyourschertler
QUICK GUIDE V1
DYN HP P48
QUICK GUIDE
THANK YOU
FOR
CHOOSING
SCHERTLER
QUICK START
INSTALLATION
Use the provided GREEN PUTTY to install the pickup
on the instrument: with a little piece of putty, form a
ball of approximately 8 mm; “work” the ball to
shape a “worm” of about 6 cm and close a ring to
fit the bottom side of the microphone; fit the DYN on
the instrument by pressing it firmly.
When the microphone has been correctly installed,
you will feel that the center spot is making contact
with the instrument.
CONNECTION
Just like any condenser microphone, connect the
DYN HP P48 to a mic channel of an acoustic
amp, preamp or mixer.
DYN HP P48 microphones require phantom power
to work, so remember to activate it once the pickup
is plugged in.
If needed, the cable lenght can be extended using
a common XLR microphone cable.
USER GUIDE available at www.schertler.co
Scan the QR code
to open
the USER GUIDE