Schertler DYN P48 Series User manual

Schertler SA
Via Beroldingen 18
6850 Mendrisio
Switzerland
T [phone]
F [phone]
[e-mail]
www.schertler.swiss
Facebook @schertler.sa
Instagram @schertleraudio
Youtube @Schertler SA
#shareyourschertler
QUICK GUIDE V1
DYN P48 series BOWED instruments
QUICK GUIDE
THANK YOU
FOR
CHOOSING
SCHERTLER
QUICK START
INSTALLATION
Use the provided GREEN PUTTY to install the pickup
on the instrument: with a little piece of putty, form a
ball of approximately 8 mm; “work” the ball to
shape a “worm” of about 6 cm and close a ring to
t the bottom side of the microphone; t the DYN on
the instrument by pressing it rmly.
When the microphone has been correctly installed,
you will feel that the center spot is making contact
with the instrument.
CONNECTION
Just like any condenser microphone, connect the
DYN P48 to a mic channel of an acoustic amp,
preamp or mixer.
DYN P48 microphones require phantom power to
work, so remember to activate it once the pickup is
plugged in.
If needed, the cable lenght can be extended using
a common XLR microphone cable.
USER GUIDE available at www.schertler.co
RELATED PRODUCTS
Scan the QR code
to open
the USER GUIDE
ARTHUR
Mixer
ACOUSTIC
Amps
CA XF XM
XLR cable
CA DYN V
CA DYN C
BINDER cable
GREEN
PUTTY YELLOW
Preamps

RECOMMENDED
POSITIONING
DYN V P48
on backside of violin or viola DYN C P48 on cello DYN B P48 on double bass