Schrack Seconet PAT User manual

Patient terminal PAT
User manual
HEALTH CARE
EN

Overview
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

ACall button
BRadio button
CTV button
D-/+ button
EMenu button
FNumerical keypad
GService call button with LED (finder light)
HRoom light
IInfrared receiver (optional)
JHeadphone connection
KMicrophone
LLoudspeaker
MDisplay
NTelephone button
OProgram selection buttons
PConfirmation button
QSpecial function button
RTeletext button
SReading light
TLED of light button (finder light)
CAUTION
Do not use as rising aid
Cable and device are no rising aid. Do not pull yourself up using the device.

Operation
Care staff call
The call button a A is constantly lit, so that it is easier
to locate even in the dark.
Call care staff
Press button a A.
u The call button a A lights up.
Care staff answers
1. Gong sounds over loudspeaker L and the call but-
ton flashes.
2. Use the patient terminal like a telephone for the
talk with the care staff.
3. The care staff ends the call at the end of the talk.
Service call
The LED of the button is constantly lit, so that it is easier
to locate even in the dark.
Press service call button h G.
u The service call button LED h G lights up.
The service staff will either call you on the device or will
come to you in person.
Turn light on and off
The LED of the light buttons T are constantly lit, so that
the buttons are easier to locate even in the dark.
Room light (optional)
Press the room light button b H briefly.
u Room light is turned on or off.
Reading light (optional)
Press the reading light button c S briefly.
u Reading light is turned on or off.
Menu functions
Set display brightness
1. Press button MENU E.
2. Select Brightness on the display M using the pro-
gram selection buttons P+/P- O.
3. Confirm with OK button P.
4. Set the desired brightness using -/+ buttons D.
5. Using the menu button MENU E to leave menu.
Set display contrast
1. Press button MENU E.
2. Select Contrast on the display M using the pro-
gram selection buttons P+/P- O.
3. Confirm with OK button P.
4. Set the desired contrast using -/+ buttons D.
5. Using the menu button MENU E to leave menu.
Set volume
1. Press button MENU E.
2. Select Volume on the display M using the program
selection buttons P+/P- O.
3. Confirm with OK button P.
4. Select for which function the volume should be set
using the program selection buttons P+/P- O.
5. Set the desired volume using -/+ buttons D.
6. Using the menu button MENU E to leave menu.
Set ringtone
1. Press button MENU E.
2. Select Ring tones on the display M using the pro-
gram selection buttons P+/P- O.
3. Confirm with OK button P.
4. Set the desired ring tone using the program selec-
tion buttons P+/P- O.
5. Using the menu button MENU E to leave menu.

Optional functions
TV
Turn TV set on and off
Press TV button d C to turn the TV set on or off.
u The TV set is turned on and the last channel
watched will be indicated on the display M.
Choosing a channel
Enter the channel number using the numerical keypad
F or switch to the next channel using the program se-
lection buttons P+/P- O.
Setting sound and volume
Sound output via the loudspeaker L or connected
headphones (connection socket J).
Set the desired volume using -/+ buttonsD.
Call up teletext
1. Press teletext button f R to call up or leave tele-
text mode.
2. Enter the page number using the numerical
keypad F or switch to the next page using the pro-
gram selection buttons P+/P- O.
Radio
Turn radio on and off
Press radio button e B to turn the radio on or off.
u The radio is turned on and the last radio channel
listened towill be indicated on the display M.
Choosing a channel
Enter the channel number using the numerical keypad
F or switch to the next channel using the program se-
lection buttons P+/P- O.
Setting sound and volume
Sound output via the loudspeaker L or connected
headphones (connection socket J).
Set the desired volume using -/+ buttonsD.
Telephone
Accept a call
1. Accept an incoming call using the telephone but-
ton i N.
2. Set the desired volume using -/+ buttonsD.
3. Press the telephone button i N to end the call
after the conversation.
Making a telephone call
1. Press the telephone button i N.
2. Press numerical key for trunk line/public switched
telephone network (usually 0, please check with
the staff).
3. Call the desired telephone number using the nu-
merical keypad F.
4. Confirm with OK button P.
5. Press the telephone button i N to end the call
after the conversation.
Last number redial
1. Press the telephone button i N.
2. The last ten dialled telephone numbers are indic-
ated on the display M.
3. Select the desired number using -/+ buttons D.
4. Confirm with OK button P.
5. Press the telephone button i N to end the call
after the conversation.
Blinds control
1. Press special functions button g Q.
2. Select Blinds on the display M using the program
selection buttons P+/P- O.
3. Open or close the blinds using the -/+ buttons D.
Infrared receiver
The infrared receiver is used to remotely control the pa-
tient terminal via environmental control devices.

Schrack Seconet AG
Eibesbrunnergasse 18 | A-1120 Vienna
+43 50 857 | [email protected]
schrack-seconet.com

Czech Rep., CZ-149 00 Prague 4, Štítová 283 | [phone]
Hungary, HU-1119 Budapest, Fehérvári út 89-95 | [phone]
India, IN-122102 Gurgaon, C-704A, Pioneer Urban Square, Sec-62 | [phone]
Poland, PL-02-972 Warsaw, ul. Branickiego 15, Wilanów Office Park, bud. B1 | [phone]
Romania, RO-023961 Bucureşti, Str. Mântuleasa nr. 15A/1 | [phone]
Russia, RU-123001 Moscow, B. Sadovaya str. 5, build. 1 office 514 | [phone]
Slovakia, SK-831 06 Bratislava, Mudrochova 2 | [phone]
Sweden, SE-126 30 Hägersten, Vretenborgsvägen 28, Floor 9 | [phone]
Turkey, TR-34718 Kadıköy-İstanbul, Koşuyolu Mah. İsmailpaşa Sk.No: 78 | [phone]
Subject to technical changes|© Schrack productions|K-HB-0082EN|V 1.0|11.2022