SCI 707540/002 User manual

Click-O-Matic®
Innovative Solutions For Laundry Lockers & Hygiene
S E R V I C E S
Mounting instructions
for lockers:
430120
430160
430200
1 2
4 5 6
click !
bottom
click !
Attention:
Inside / Outside of back
click !
bottom
back
holes at the
back
3 5
Instructions - set up new code
Combination lock 4 digits
1202.40.90
SCI-Services SA
Ch. de Budron D3
CH-1052 Le Mont-sur-Lausanne, Switzerland
Tel [phone]
[email protected]
www.sci-services.ch
How to set up a new code Slide the wheel to the correct code.
The factory default code is “0000”.
Then turn the knob to the UNLOCK position.
1
Products:
• 707540/002 - Eurostyle
• 707540/003 - Click-O-Matic®
• 707540/004 - Change-O-Matic®
Knob
Code change hole
Wheel
Alignment line
Indicator
Unlock
Lock
Cylinder hole
Please insert the tool to set the code
in the relevant position and turn 90°.
Tool to set the
code
Slide the wheel to the
numbers you want.
Turn the knob to the lock position
to finish setting up the new code.
2
3 4 5

Click-O-Matic®
Innovative Solutions For Laundry Lockers & Hygiene
S E R V I C E S
Mounting instructions
for lockers:
430120
430160
430200
1 2
4 5 6
click !
bottom
click !
Attention:
Inside / Outside of back
click !
bottom
back
holes at the
back
Instructions - retrieve codes
Combination lock 4 digits
1202.40.90
SCI-Services SA
Ch. de Budron D3
CH-1052 Le Mont-sur-Lausanne, Switzerland
Tel [phone]
[email protected]
www.sci-services.ch
How to retrieve codes
Pass key 707541/001
When you forget the code,
please insert the pass key in the cylinder,
and turn 90°.
Products:
• 707540/002 - Eurostyle
• 707540/003 - Click-O-Matic®
• 707540/004 - Change-O-Matic®
Knob
Code change hole
Wheel
Alignment line
Indicator
Unlock
Lock
Cylinder hole
Keep the key inserted, slide the
wheel one by one from left
to right.
Once the wheel stops, it comes to
the correct number.
Keep this position
Turn the key 90° back,
take out the key.
Keep the key for future
needs.
Fixed hole dimensions
90°
* Please do not force the key
1 2
3 4 5