Scinex gLite User manual

User Manual
gLite
Bluetooth Headset

Table of Contents
Overview of Headset....................................................1
Basic Functions.............................................................2
How to Wear.................................................................3
How to Charge.............................................................4
How to Connect............................................................5
Pair with Another Phone...............................................6
How to Adjust Volume..................................................7
How to Switch Songs....................................................7
Mute During Call..........................................................8
How to Use Siri..................................................................8
Technical Specications......................................................9
FAQ.............................................................................10
Warranty.................................................................11

Overview of Headset
1
Basic Functions
2
Volume - Button
Volume + Button
Charging Port
Mute Button
Indicator Light
Microphone
Speaker
Multi-Function
Button
(MFB)
FUNCTION OPERATION
Turn On
Turn Off
Enable Pairing Mode
Answer Call
End a Call
Reject Incoming Call
Redial Last Number
Volume Up
Volume Down
Previous Track
Next Track
Music Play/Pause
Hold MFB for 3 seconds
Hold MFB (Red light flashes twice)
Hold the MFB for 6 seconds
Click the MFB once
Click the MFB once
Hold MFB for 2 seconds
Double click MFB twice
Click the volume + button
Click the volume - button
Click the volume - button
Hold the volume + button
Click the mute or MFB button

How to Charge
3
-When the headset is low on battery, a red light indicator will flash twice
with a voice prompt.
-To charge the battery, plug the USB cable into a wall adapter or to a
computer. Then plug the Bluetooth device into the USB cable.
Once the headset , a red light indicator will display. Once fully is charging
charged, the blue light indicator will turn on.
How to Wear
This headset can be worn on both ears. Here is how to adjust the
headset:
1. Rotate the speaker upwards.
2. Twist the ear hook around so the ear tip is on the other side.
3. Lower the speaker.
4. To change the ear tip, gently pull off the ear tip to take it off.
Get the perfect fit by changing the ear tip to one of the other
sizes.
4
*Warning: For safety reasons, we designed this headset to not be functional
while it is charger. If the output of the charger is greater than 5V, it can potentially damage
the headset. Please use a standard charger (5v or lower) for the headset.

Pairing With Another Phone
-Pair with first device.
-Once connected, turn off the Bluetooth of first device, then turn off
the headset by holding the multi-function button for 6 seconds.
-Turn the headset back on and make sure it is in searching mode. Make
sure that the Bluetooth is off in the first device.
-Enable the Bluetooth function on the second device and click on
“gLite” to connect.
-Enable the Bluetooth function of the first phone and find the targeted
headset, “gLite”, then click to connect. You should be able to make
phone calls from both cellular devices with the Bluetooth headset.
How to Connect
-Press the multi-function button for about 6 seconds. A“Power On”
will sound and the headset lights will flash red and blue.
-Activate Bluetooth on your phone and set it to search for new devices.
For iPhone: Settings > Bluetooth > On
For Android: Bluetooth: On > Scan for devices
-NOTE: Menus may vary by device.
-Select “gLite”. Once successfully paired, there will be a “connected” voice
alert and the headset indicator lights will flash blue.
-NOTE: The headset powers off automatically after 10 minutes when
not paired to a phone.
56
gLite
7A:EC:43:A1:AB:4A
57:4F:5D:A3:76:D0
50:FA:58:0E:D1:58
gLite
Available devices
Paired devices
Connected
On
Bluetooth
Bluetooth
gLite
Now discoverable as “iPhone”.
MY DEVICES
Block Rocker
MPOW
EVOLUTION 2
Apple Watch
AirPods
BOSE Mini SoundLink
MB Bluetooth
Not Connected
Not Connected
Not Connected
Not Connected
Not Connected
Not Connected
Not Connected
Connected
Settings Bluetooth

How to Mute During Calls
-When clicking the mute button, a “mute on” alert will sound.
Once clicking on it again, it will turn the mute feature off.
How to Use Siri
-Siri Function and voice assistant function only while in standby mode.
-Hold the multi function button for 3 seconds to enable Siri or Voice Assistant.
Once hearing a “beep”, say the voice command.
How to Adjust Volume
-Tap the button “+” to raise the volume, tap the “-” to lower the volume.
-NOTE: When raising or lowering the volume, you will hear a “beep” to
indicate when it is at the highest or lowest volume.
How to Switch Songs
-Hold the volume button to switch the songs forward or backward.
-To skip a song, hold the “+” button and it will skip to the next song.
-To play the previous song, hold the “-” button and the previous song will
play.
78
Volume - Button
Volume + Button
Mute Button
Multi-Function
Button

Frequently Asked Questions
A: Avoid exposing the device to extreme temperatures (above 35 °C/ 95 °F
or below -20 °C/-4 °F). It will shorten the battery life and may affect the
headset operation. Do not expose the headset to rain or any other liquids.
Technical Specications
910
Support Bluetooth file: HSP/ HFP/ AAC/ A2DP/ AVRCP
Range: 33 ft/ 10 m
Talk Time: Up to 7 hours
Standby Time: Up to 180 hours
Music Time: Up to 7 hours
Charge Time: About 2 hours
Operating temperature: 14°F - 122 °F (-10 °C- 50 °C)
Battery and pairing status display
Siri supported & voice assistant function
HD Voice quality
Bluetooth Version 4.1 + EDR Q: Why is there a crackling noise?
A: Bluetooth is a radio technology that is a sensitive to objects between
the headset and the connected device. Ensure the headset and the
connected device are within range.
Q: What is the range of the headset?
A: The Bluetooth Headset supports the following ranges: 10m/33ft.
Q: Why can’t I hear anything?
A: You might need to increase the volume or ensure that the headset is
connected to a device.
Q: Why is my headset not able to connect with the device?
A: Check your device’s Bluetooth menu and delete or forget the headset.
Reconnect the headset to your Bluetooth device following the Bluetooth
connection instructions.
Q: How do I take care of my headset?

Warranty Information
-Please fully read the following items carefully so the product may be
repaired within the allotted warranty time. To view the full terms of the
Limited Warranty & Warranty Service Policy and to check if your
Bluetooth headset is still under warranty, please visit
https://www.scinex.com/warranty_policy
-A Return Materials Authorization is required in order to return an item
for a warranty repair.
-Please locate and fill out a Return Materials Authorization form online
at https://www.scinex.com/warranty_policy.
-The duration of our standard warranty is 1 year beginning on the
purchase date. Warranty repair is offered by Scinex for problems
caused by manufacturing error within the warranty time.
Problems caused by the following are not covered by the warranty
but may be repaired for a fee:
-Problems arising from use of the Bluetooth headset that is not according
to the user manual.
-Damage caused by user fault or accident.
-Damage caused by disassembling the Bluetooth headset without Scinex’s
permission.
- Scratches and wear or exposure to damaging chemicals.
-Repair services are still available after the warranty has expired but
for a service fee.
11 12

POWERED BY
www.Scinex.com