Scion-Tech SC04.MX44+ User manual

User Manual
Version 1.0
SC04.MX44+
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]
18Gbps 4 x 4 HDMI Matrix Switch
with ARC and Downscaler

User ManualScion Tech SC04.MX44+
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric
shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend
the life of your equipment.
Contents
1. Introduction....................................................................................................................................... 2
2. Product Features................................................................................................................................ 2
3. Package Contents............................................................................................................................... 2
4. Specifications.................................................................................................................................... 3
5. Front & Rear Panel Description........................................................................................................ 4
6 . IR Remote......................................................................................................................................... 5
7. Preparing your PC’s IP Address........................................................................................................ 6
8. Web GUI........................................................................................................................................... 7
8.1 Status................................................................................................................. 7
8.2 Video................................................................................................................. 8
8.3 Input................................................................................................................... 8
8.4 EDID Settings.................................................................................................... 9
8.5 Outputs............................................................................................................... 10
8.6 Resolution Scaling............................................................................................. 10
8.7 ARC (audio return channel) and Stream........................................................... 10
8.8 Network Settings............................................................................................... 11
8.9 System............................................................................................................... 11
9. API Control Command...................................................................................................................... 12
10. ASCII Commands........................................................................................................................... 13
11. Application Drawing....................................................................................................................... 16
12 . Maintenance and Warranty............................................................................................................. 17
Tel: [phone] www.scion-tech.co.uk [email protected]
Page 1

1. Introduction
The SC04.MX44+ matrix switches 4 x HDMI inputs to 4 x HDMI outputs in a true matrix environment, any input
to any output simultainiously and supports 18Gbps video bandwidth with resolutions up to 4K/60Hz 4:4:4,
HDR10+ and Dolby Vision™. Each output has the facility to down scale the video resolution from 4K to 1080P.
The matrix supports LPCM 7.1, Dolby True HD™, DTS-HD Master Audio and extracts digital and analogue audio
from the HDMI outputs. Additionally the ARC (audio return channel) ensures synced audio with the display on the
digital audio output.
It’s advanced EDID features provide auto detection, copy and built in standard settings ensuring compatibility with
all source and sink devices.
The matrix is controlled with switches located on the front panel, IR remote control, RS232 and TCP/IP web GUI.
2. Features
●4 x HDMI inputs to 4 HDMI outputs
●Supports 18Gbps
●4K/60Hz, YCbCr 4:4:4
●HDMI 2.0, HDCP 2.2
●Advanced EDID
● Downscalefrom4K↔1080P
●Supports HDR, HDR10+, HLD, Dolby Vision
●LPCM 7.1, Dolby True HD™, DTS HD Master Audio
●De-Embedded Analogue and Digital Audio
●ARC (audio return channel)
●Control: Front panel, IR control, RS232 and TCP/IP Web GUI
3. Package contents
1. Main Unit (SC04.MX44+)
2. Power Adaptor 12V/2.5A
3. IR Remote
4. Mounting Brackets
5. IR External Cable
6. 3-Pin Phoenix Terminal
7. User Manual
Page 2
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]

4. Specifications
Page 3
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]
Connectivity
HDMI Input: 4 x HDMI Type A, 19-Pin Female
HDMI Output: 4 x HDMI Type A, 19-Pin Female
Digital Audio Output: 4 x Coaxial RCA Phono Socket
Analogue Audio Output: 4 x 3.5mm Stereo Jack Socket
RS232: 1 x 3-Pin Phoenix Terminal
TCP/IP: 1 x RJ45 Data Socket
IR External: 1 x 3.5mm Jack Socket
Power: 1 x DC Jack
Signal
Signal Input/Output: HDMI
Standards: HDMI 2.0, HDCP 2.2
Bandwidth: 18Gbps
Video Resolutions: 4K/60Hz, 4:4:4
Colour Space: RGB/YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0, HDR, HDR 10+, DLD, Dolby Vision
Colour Depth: 8/10/12-bit
Output Scaling:4K↔1080P
HDMI Audio: PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24,
DTS High Res, DTS HD Master Audio, DSD
Coaxial Audio: PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1
Analogue Audio: PCM 2.0CH
Infra-Red: Wide Bandwidth, Frequency 30KHz to 56KHz (940nm)
Power
Type: AC to DC Mains Adaptor
Input: 100~240V AC 50/60Hz
Output: Transmitter 12V/2.5A
Consumption: 10 Watts (max), 1.56 Watts (Standby)
Environment
Operating Temperature: -0° to 40°C
Storage Temperature: -20° to 60°C
Operating Humidity: 20 to 90% RH (no condensation)
Dimensions: (W) 220 x (D) 105 x ( H) 44
Weight: 790g
Colour: Black
ESD: Human Body - +/-8kV, (air gap discharge) & +/-4kV (contact discharge)
Safety and Emissions: CE, FCC, RoHS
Resolution and Cable Lengths (IN/OUT)
15m @ 1080p/60Hz
10m @ 4K/30Hz
3m @ 4K/60Hz
Note: Premium High Speed HDMI cables are required to achieve these results.

5. Front & Rear Panel Description
User ManualScion Tech SC04.MX44+
Number Name Function / Description
1 IR Infra-Red sensor
2 Power LED The LED illuminates Red when the product is on or in standby
3 Output 1 Short press on the OUT 1 button selects the input source
4 Output 2 Short press on the OUT 2 button selects the input source
5 Output 3 Short press on the OUT 3 button selects the input source
6 Output 4 Short press on the OUT 4 button selects the input source
Page 4
Tel: [phone] www.scion-tech.co.uk [email protected]
IR
OUT 1
42 31
OUT 2
42 31
OUT 3
42 31
OUT 4
42 31
18Gbps 4 x 4 HDMI Matrix
www.scion-tech.co.uk
SCION
1 2 3 4 5 6
IN 1 IN 2 IN 3 IN 4
DC 5V
OUT 1 OUT 2 OUT 3 OUT 4
OUT 4
COAX L/R
OUT 3
COAX L/R
OUT 2
COAX L/R
OUT 1
COAX L/R
TCP/IP
CONTROL
RS232 IR EXT
Tx Rx
234
567
Num
ber Name Function / Description
1 TCP/IP Ethernet port for Web interface
2 RS232 3-Pin Phoenix for RS232 control
3 IR Ext Extends the IR with cable supplied
4 De-Embedded Audio Analogue and Digital audio outputs (ARC or Mirrored)
5Inputs1↔4 HDMI Inputs
6Outputs1↔4 HDMI Ouputs
1

Page 5
6. IR Remote
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]
Button Function / Description
Power ON and Standby
Output1↔4
Selects input source to outputs.
Selects the next or last input.
SD Activates the downscaler
HDMI Matrix
Output 1
123 4
SD
Output 2
123 4
SD
Output 3
123 4
SD
Output 4
123 4
SD

7. Preparing your PC for TCP/IP control
User ManualScion Tech SC04.MX44+
Page 6
Tel: [phone] www.scion-tech.co.uk [email protected]
To access the Web interface enter the matrix IP address in to your web browser address bar. The default IP
address is 192.168.1.100
Note: If the IP address is unknown, use the RS232 interface command in section (r ip addr!) to discover the
current IP settings or reset the matrix to it’s factory default settings.
Set you computers IP address the the same network segment as the matrix. For example: IP address
192.168.1.200 and subnet mask: 255.255.255.0. Avoid using the matrix default settings when entering the
computers IP address.

Page 7
8. Web GUI
Enter the matrix IP address in to your computers Web Browser. When the matrix GUI opens enter the login and
Password.
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]
User ManualScion Tech SC04.MX44+
8.1 Status
Status
Video
Input
Output
Network
System
4 x 4 HDMI Matrix Admin Log Out Standby
Status
Model SC04.MX44+
Firmware Version V1.00.04/1.37
Hostname Op-module
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Gateway 192.168.1.1
Mac Address 6C:DF:FB:02:11:D6
Administrator Login
Username: Admin
Password: admin
User Login
Username: User
Password: user

User ManualScion Tech SC04.MX44+
Page 8
Tel: [phone] www.scion-tech.co.uk [email protected]
8.2 Video
This section allows you to create “presets” to memorise commonly used crosspoint settings.
1. Select your input and output preference.
2. Click “Save”
3. Now the preset will activate when the “Set” button is pressed.
4. To delete a preset, click the “Clear” button.
Status
4 x 4 HDMI Matrix Admin Log Out Standby
Matrix
Video
Input
Output
Network
System
OUTPUTS VIDEO SOURCE
Output 1 HDMI 1 INPUT
Output 2 HDMI 2 INPUT
Output 3 HDMI 3 INPUT
Output 4 HDMI 4 INPUT
Presets
Preset Name Preset Set Preset Save Preset Clear
Preset 1
Preset 2
Preset 3
Preset 4
SaveSet
Set
Set
Set
Clear
Save
Save
Save
Clear
Clear
Clear
8.3 Input
The input page provides information about which inputs are connected and whether they have a signal present. The
inputs names can be edited to your desired name and the EDID settings can be changed for each input.
Status
4 x 4 HDMI Matrix Admin Log Out Standby
Input Settings
Video
Input
Output
Network
System
Inputs Active Name EDID
HDMI 1 Input 1 4K/60_444, HD Audio 7.1 HDR
HDMI 2 Input 2 4K/60_444, HD Audio 7.1 HDR
HDMI 3 Input 3 4K/60_444, HD Audio 7.1 HDR
HDMI 4 Input 4 4K/60_444, HD Audio 7.1 HDR
Load EDID to User Memory
Select EDID File: Browse…
Select EDID File:
Load EDID to Computer
Download
HDMI 1
Select Destination:
Upload

User ManualScion Tech SC04.MX44+
Page 9
Tel: [phone] www.scion-tech.co.uk [email protected]
8.4 EDID Settings
The following EDID option are available.
1080p, Stereo Audio 2.0
1080p, Dolby/DTS 5.1
1080p, HD Audio 7.1
1080i, Stereo Audio 2.0
1080i, Dolby/DTS 5.1
1080i, HD Audio 7.1
3D, Stereo Audio 2.0
3D, Dolby/DTS 5.1
3D, HD Audio 7.1
4K2K30Hz_444 Stereo Audio 2.0
4K2K30Hz_444 Dolby/DTS 5.1
4K2K30Hz_444 HD Audio 7.1
4K2K60Hz_420 Stereo Audio 2.0
4K2K60Hz_420 Dolby/DTS 5.1
4K2K60Hz_420 HD Audio 7.1
4K2K60Hz_444 Stereo Audio 2.0
4K2K60Hz_444 Dolby/DTS 5.1
4K2K60Hz_444 HD Audio 7.1
4K2K60Hz_444 Stereo Audio 2.0 HDR
4K2K60Hz_444 Dolby/DTS 5.1 HDR
4K2K60Hz_444 HD Audio 5.1 HDR
USER_1
USER_2
COPY_FROM_TX_1
COPY_FROM_TX_2
COPY_FROM_TX_3
COPY_FROM_TX_4
The binary EDID file can also be sent to User 1 or User 2 EDID Memory.
1. Select the binary EDID file on your PC by clicking the “Browse” button.
2. Select either “User 1” or “User 2” from the drop-down list.
3. Click the “Upload” button.
The EDID data from any input or from User 1 and User 2 locations can be read and stored on your PC.

User ManualScion Tech SC04.MX44+
Page 10
Tel: [phone] www.scion-tech.co.uk [email protected]
8.5 Outputs
This section provides information about the signal status of the outputs and allows editing of output names.
Status
4 x 4 HDMI Matrix Admin Log Out Standby
Output Settings
Video
Input
Output
Network
System
Outputs Name Type Cable
Scaler Mode
ARC Stream
Output 1 Output 1 HDMI Bypass
Output 2 Output 2 HDMI 4K→1080p
Output 3 Output 3 HDMI Auto
Output 4 Output 4 HDMI Auto
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
8.6 Resolution Scaling
The following options are available:-
Bypass Follow the input source (pass-through)
4K→1080p Downscale to 1080p
AUTO Scale to match the displays requirement
8.7 ARC (audio return channel) and Stream
The ARC buttons enable or disable the display device audio to the coaxial audio outputs. If the ARC function is
enabled the L/R audio ports will have no audio output simultaneously.
The stream buttons enable or disable the output for the respective output.

User ManualScion Tech SC04.MX44+
8.8 Network Settings
The network settings page allows the configuration of the network settings.
Status
4 x 4 HDMI Matrix Admin Log Out Standby
IP Settings
Video
Input
Output
Network
System
Page 11
Tel: [phone] www.scion-tech.co.uk [email protected]
Mode Static DHCP
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Telnet Port: 23
Web Login Settings
User Admin
Old Password:
New Password:
Username:
Confirm:
8.9 System
The system page allows changes to the front panel functions and RS232 baud rates. This page is also used to
perform upgrades and system reset to factory default.
Status
4 x 4 HDMI Matrix Admin Log Out Standby
Panel Lock
Video
Input
Output
Network
System
ON OFF
Serial Baud Rate
Browse…
Factory Reset:
Reboot:
Firmware Update
Beep (sound)
ON OFF
1152009600 19200 38400 576004800
Update
Reset
Reboot

Page 12
Tel: [phone] www.scion-tech.co.uk [email protected]
User ManualScion Tech SC04.MX44+
9 API Control Command
Connect the matrix RS232 to your PC using the cable supplied and open a serial command controller application
such as Docklight, or Hercules.
TCP/IP
CONTROL
RS232 IR EXT
Tx Rx
Rx
Ground
Tx
Baudrate: 115200 (default)
Data bits: 8
Parity: None
Stop bits: 1
Note:
1. All messages sent to the matrix must be terminated with an exclamation mark (!). Any carriage return that
is present after the end of the command will be ignored.
2. All spaces shown in the commands are required.
3. All response messages are terminated by a CR/LF sequence.
4. When all four inputs are requested by the same command, the response will report each input on a separate
line.
5. When all four outputs are requested by the same command, the response will report each output on a
separate line.

10 ASCII Commands
User ManualScion Tech SC04.MX44+
Page 13
Tel: [phone] www.scion-tech.co.uk [email protected]
ASCII Command
Serial Port Protocol: Baud rate: 115200 (default), Data bits: 8-bit, Stop bits: 1, Check bit: None
TCP/IP Protocol Port: 8000
The x, y, z and XXX are parameters.
RS232 Command Function Description Feedback
s power z! Power on/off the device,z=0~1(z=0 power off, z=1 power on)
Power on
System Initialising…
Initialisation Finished!
Power off
r power! Get current power state Power on / power off
s reboot! Reboot the device
Reboot…
System Initialising…
Initialisation Finished!
System Setup
help! Lists all commands
r type! Get device model SC04.MX44+
r status! Get device current status
Get the unit all status: Power, beep, lock,
in/out connection, video/audio crosspoint,
edid, scaler, hdcp, network status
r fw version! Get firmware version MCU FW version x.xx.xx
r link in x! Get the connection status of the x input port, x=0~4(0=all) HDMI IN1: connect
r link out y! Get the connection status of the y input port, y=0~4(0=all) HDMI OUT1: connect
s reset! Reset to factory defaults
Reset to factory defaults
System Initialising…
Initialisation Finished!
s beep z! Enable/Disable buzzer function,z=0~1 (z=0 beep off, z=1 beep on) Beep on / beep off
r beep! Get buzzer state Beep on / beep off
s lock z! Lock/Unlock front panel button, z=0~1, (z=0 lock off, z=1 lock on) Panel button lock on, panel button lock off
r lock! Get panel button lock state Panel button lock on/off
s save preset z! Save switch state between all output ports and the input port to preset z,
z=1~8 Save to preset 1
s recall preset z! Call saved preset z scenarios, z=1~8 Recall from preset 1
s clear preset z! Clear stored preset z scenarios, z=1~8 Clear preset 1
r preset z! Get preset z information, z=1~8 Video/audio crosspoint
s baud rate xxx! Set the serial port baud rate of RS02 module,
z=(115200,57600,38400,19200,9600,4800)
Baudrate: 115200
r baud rate! Get the serial port baud rate of RS02 module Baudrate: 115200
s id z! Set the control ID of the product, z=000~999 Id 888
Output Setting
s in x av out y! Set input x to output y, x=1~4, y=0~4 (0=all) Input1→output2
r av out y! Get output y signal status y=0~4 (0=all) Input1→output1
Input2→output2
Input3→output3
Input4→output4
s out y stream z! Set output y stream on/off, y=0~4 (0=all) z=0~1 (0:disable, 1 enable) Enable out 1 stream, Disable out 1 stream
r out stream! Get output y stream status, y=0~4 (0=all) Enable out 1 stream
s hdmi y scaler z! Set hdmi output y port scaler mode, y=0~4 (0=all), z=1~3 (1=bypass,
2=4K→1080p,3=auto)
hdmi 1 set to bypass mode
r hdmi scaler! Get hdmi output y port output mode y=0~4 (0=all) hdmi 1 set to bypass mode
s hdmi hdcp z! Set hdmi output y port hdcp status y=0~4 (0=all), z=0~1 (1=active,
0=off)
hdmi 1 hdcp active
r hdmi y hdcp! Get hdcp staus of hdmi out y, y=0~4 (0=all) hdmi 1 hdcp active

User ManualScion Tech SC04.MX44+
Page 14
Tel: [phone] www.scion-tech.co.uk [email protected]
Audio Setting
s hdmi y arc z! Turn on/off arc of HDMI output y, y=0~4 (0=all), z=0~1 (z=0 off, z=1 on) hdmi output 1 arc on
hdmi output 1 arc off
r hdmi y arc! Get the arc state of HDMI output y, y=0~4 (0=all) hdmi out1 arc on
EDID Setting
r edid in x! Get EDID status of the input x, x=0~4 (0=all inputs)
IN1 EDID: 4K2K60_444, Stereo
Audio 2.0
IN2 EDID: 4K2K60_444, Stereo
Audio 2.0
IN3 EDID: 4K2K60_444, Stereo
Audio 2.0
IN4 EDID: 4K2K60_444, Stereo
Audio 2.0
r edid data hdmi y! Get the EDID data of the hdmi output y port, y=1~4 EDID : 00 FF FF FF FF FF FF 00…
s edid in x from z!
Set input x EDID from default EDID z, x=0~4 (0=all), z=1~23
1, 1080p, Stereo Audio 2.0
2, 1080p, Dolby/DTS 5.1
3, 1080p, HD Audio 7.1
4, 1080i, Stereo Audio 2.0
5, 1080i, Dolby/DTS 5.1
6, 1080i, HD Audio 7.1
7, 3D, Stereo Audio 2.0
8, 3D, Dolby/DTS 5.1
9, 3D, HD Audio 7.1
10, 4K2K30Hz_444 Stereo Audio 2.0
11, 4K2K30Hz_444 Dolby/DTS 5.1
12, 4K2K30Hz_444 HD Audio 7.1
13, 4K2K60Hz_420 Stereo Audio 2.0
14, 4K2K60Hz_420 Dolby/DTS 5.1
15, 4K2K60Hz_420 HD Audio 7.1
16, 4K2K60Hz_444 Stereo Audio 2.0
17, 4K2K60Hz_444 Dolby/DTS 5.1
18, 4K2K60Hz_444 HD Audio 7.1
19, 4K2K60Hz_444 Stereo Audio 2.0 HDR
20, 4K2K60Hz_444 Dolby/DTS 5.1 HDR
21, 4K2K60Hz_444 HD Audio 5.1 HDR
22, USER_1
23, USER_2
24, COPY_FROM_TX_1
25, COPY_FROM_TX_2
26, COPY_FROM_TX_3
27, COPY_FROM_TX_4
IN1 EDID:1080p,Stereo Audio 2.0
Network Setting
r ipconfig! Get the current IP configuration
IP Mode: Static, IP: 192.168.1.72
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Mac address: 00:1C:91:03:80:01
TCP/IP port=8000, telnet port=10
r mac addr! Get network MAC address Mac address: 00:1C:91:03:80:01
s ip mode z! Set network IP mode to static IP or DHCP, z=0~1 (z=0 Static, z=1 DHCP)
Set IP Mode: Static. Please use “s
net reboot!” Command or re-power
device to apply new config!
r ip mode! Get network IP mode IP mode: Static
S ip addr
xxx.xxx.xxx.xxx! Set network IP address
Set IP address: 192.168.1.100
Please use “s net reboot!” Command
or re-power device to apply new
config! DHCP on, device can’t
config static address, set DHCP off
first.

Page 15
Tel: [phone] www.scion-tech.co.uk [email protected]
User ManualScion Tech SC04.MX44+
r ip addr! Get network IP address IP Address: 192.168.1.100
s subnet
xxx.xxx.xxx.xxx! Get network subnet mask
Set subnet mask: 192.168.1.100
Please use “s net reboot!” Command
or re-power device to apply new
config! DHCP on, device can’t
config subnet mask, set DHCP off
first.
r subnet! Get network subnet mask Subnet Mask: 255.255.255.0
s gateway
xxx.xxx.xxx.xxx! Set network gateway
Set Gateway: 192.168.1.1
Please use “s net reboot!” Command
or re-power device to apply new
config! DHCP on, device can’t
config gateway, set DHCP off first.
r gateway! Get network gateway Gateway: 192.168.1.1
s tcp/ip port x! Set network TCP/IP port (x=1~65535) Set tcp/ip port:8000
r tcp/ip port! Get network TCP/IP port tcp/ip port:8000
s telnet port x! Set network telnet port (x=1~65535) Set telnet port:23
r telnet port! Get network telnet port Telnet port:23
s net reboot! Reboot network modules
Network rebbot…
IP Mode: Static
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Mac address: 00:1C:91:03:80:01
TCP/IP port=8000
Telnet port=10

11 Application Drawing
Page 16
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]
HDMI Source
1↔4
Display
Display
Display
Display
IN 1 IN 2 IN 3 IN 4
DC 5V
OUT 1 OUT 2 OUT 3 OUT 4
OUT 4
COAX L/R
OUT 3
COAX L/R
OUT 2
COAX L/R
OUT 1
COAX L/R
TCP/IP
CONTROL
RS232 IR EXT
Tx Rx
Audio Amplifier Speakers

Page 17
12 Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, pint thinner of benzene to clean these devices.
Servicing
Damage requiring service: This product should be serviced by a qualified service engineer if:
●The DC power cord or AC adaptor has been damaged.
●Objects or liquids have entered the housings.
●The product has been exposed to rain.
●The product has stopped working or shows signs of significant change in operating performance or function.
●The unit has been dropped or severely damaged externally.
Servicing personnel: Do not attempt to service the product beyond that described in these instructions. Refer all
other servicing to authorised serving personnel.
Replacement parts: When parts need replacing ensure the service engineer uses parts specified by the manufacture
or parts that have the same characteristics as the original parts. Unauthorised substitutes may result in fire, electric
shock or other hazards.
Safety check: After a repair or service, ask the engineer to perform safety checks to confirm the product is in
proper working condition.
Warranty
If your product does not work properly because of a defect in materials or workmanship, our Company (referred to
as "the warrantor" ) will , for the length of the period indicated as below, (Parts and labour 2 years) which starts
with the date of original purchase ("Limited Warranty period"), at its option either (a) repair your product with new
or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will be
made by the warrantor.
During the "Labour" Limited Warranty period there will be no charge for labour. During the "Parts" warranty
period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited
Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt
or other proof of original purchase date is required for Limited Warranty service.
Returning a Product
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Include a letter detailing the complaint and provide a day time phone number and/or email address where you can
be reached.
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]

Page 18
Limited warranty limits and exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which
result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, maladjustment of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or service by anyone other than a Factory Service centre or other authorized service engineer, or
damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an
installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other
recorded content. The items listed are not exclusive, but are for illustration only).
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY. This returns policy does not affect your legal rights. Details of your legal rights are available
from Trading Standards or Citizens Advice Consumer Service.
Scion Tech Limited
Thatcham, Berkshire, United Kingdom
User ManualScion Tech SC04.MX44+
Tel: [phone] www.scion-tech.co.uk [email protected]