Scion SC05.8100VS User manual
HDBaseT 3.0 Extender
with eARC/ARC (100m)
Version 1.0
SC01.7060
SCION
SC05.8100VS SCION
Operating Instructions
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric
shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and
extend the life of your equipment.
Table of Contents
1.0 Introduction...................................................................................................... 1
2.0 Features............................................................................................................ 1
3.0 Package Contents............................................................................................. 1
4.0 Specifications................................................................................................... 2
5.0 Controls and Functions..................................................................................... 4
5.1 Transmitter Panel.............................................................................. 4
5.2 Receiver Panel................................................................................... 6
5.3 Input and Output Switching.............................................................. 7
5.4 Audio Embedding and De-Embedding............................................. 10
5.5 USB Applications............................................................................. 11
5.6 Infrared Pin Connections.................................................................. 12
6.0 Application Drawing........................................................................................ 13
User ManualScion Tech SC05.8100VS
Page 1
User ManualScion Tech SC05.8100VS
1.0 Introduction
This HDBaseT 3.0 Extender extends uncompressed HD/UHD video and audio signals, eARC/ARC, RS-232,
bi-directional IR, 1G Ethernet and USB 2.0 signals up to 100m/328ft via a single CAT6A/7 cable. The
Transmitter supports audio embedding or de-embedding. The Receiver supports audio de-embedding. It also
supports eARC/ARC from RX's HDMI output pass through to TX's HDMI input or de-embedding to TX's
HDMI audio only and SPDIF output ports, USB 2.0 (Host/Device is configurable) and bi-directional POC.
The Extender offers the most convenient solution for HDMI extension via a single CAT cable with long
distance capability, and is the perfect solution for home/commercial applications.
2.0 Features
●HDMI 2.0b, HDCP 2.2 and HDBaseT 3.0 compliant
●Uncompressed 4K@60Hz 4:4:4 up to 18Gbps video bandwidth
●HDR, HDR10, HDR10+, Dolby Vision and HLG pass through
●LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24,
●DTS High Res, DTS-HD Master Audio, DSD pass through
●Transmission distance up to 328ft/100 meters via a single CAT 6A/7 cable
●Supports eARC/ARC function (the audio is returned to the HDMI IN port,
●HDMI OUT(AUDIO ONLY) port and SPDIF OUT port of the transmitter.)
●Supports SPDIF audio reverse transmission
●Bi-directional IR, RS-232 and 1G Ethernet signal pass through
●Supports USB 2.0 transmission, Host/Device is configurable
●Bi-directional 24V PoC function
3.0 Package Contents
1 x HDBaseT 3.0 Extender (Transmitter)
1 x HDBaseT 3.0 Extender (Receiver)
1 x IR Blaster Cable (1.5m)
1 x IR Receiver Cable (1.5m)
4 x Mounting Ears
2 x 3-Pin Phoenix Terminals
1 x 24V/1A Power Adaptor
User ManualScion Tech SC05.8100VS
Page 2
4.0 Specifications
Technical
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.2
Video Bandwidth 18Gbps
Video Resolution Up to 4K@60Hz 4:4:4
HDBaseT Bandwidth 16Gbps on main and 2Gbps on return link
HDR HDR, HDR10, HDR10+, Dolby Vision, HLG
Colour Space RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Colour Depth 8/10/12-bit
Audio Formats LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS
High Res, DTS HD Master Audio, DSD
L/R Audio Formats PCM 2.0
SPDIF Audio Formats LPCM 2.0, AC3 5.1, DTS 5.1
IR Level 12V p-p
IR Bandwidth 20K - 60KHz
USB Bandwidth Up to 350Mbps
Ethernet 1000Mbps
RS232 Up to 921600bps
Transmission Distance 100m (via a single CAT6a/7 cable)
ESD Protection
Human Body Example - +/-8kV (air gab discharge) & +/-4kV (contact discharge)
Connections
Transmitter
Inputs 1 x HDMI (Type-A, 19-Pin Female)
Outputs
1 x HDMI (Type-A, 19-Pin Female)
1 x HDBaseT (RJ45 Data Socket)
1 x Optical (SPDIF)
1 x Stereo Audio (3.5mm Jack Socket)
Controls
1 x IR Input (3.5mm Jack Socket)
1 x IR Output (3.5mm Jack Socket)
1 x Service Port (mini USB)
1 x USB Host (Type-B)
2 x USB Devices (Type-A)
1 x 1G Ethernet (RJ45 Data Socket)
1 x RS232 (3-Pin Phoenix Terminal)
Receiver
Inputs 1 x HDBaseT (RJ45 Data Socket)
1 x Optical (SPDIF)
Outputs 1 x HDMI (Type-A, 19-Pin Female)
1 x Stereo Audio (3.5mm Jack Socket)
Controls
1 x IR Input (3.5mm Jack Socket)
1 x IR Output (3.5mm Jack Socket)
1 x Service Port (mini USB)
1 x USB Host (Type-B)
2 x USB Devices (Type-A)
1 x 1G Ethernet (RJ45 Data Socket)
1 x RS232 (3-Pin Phoenix Terminal)
User ManualScion Tech SC05.8100VS
Page 3
4.0 Specifications (cont……)
Mechanical
Housing Metal Enclosure
Colour Black
Dimensions Transmitter (W) 170 x (D) 102 x (H) 22mm
Receiver (W) 170 x (D) 102 x (H) 22mm
Weight Transmitter 425g
Receiver 437g
Power Supply
Input AC 100 - 240V 50/60Hz
Output DC 24V / 1A (US/EU standard, (CE/FCC/UL)
Consumption 15.36W (PoC)
Operating Temperature 32 - 104ºF / 0 - 40ºC
Storage Temperature -4 - 140ºF / -20 - 60ºC
Relative Humidity 20 - 90% RH (no condensation)
Resolution / Cable Lengths 4K60 - Feet / Meters 4K30 - Feet / Meters 1080P60 = Feet / Meters
HDMI In / Out 16 Feet / 5 meters 32 Feet / 10 Meters 50 Feet / 15 Meters
The use of “Premium High Speed HDMI” Cables is highly recommended.
User ManualScion Tech SC05.8100VS
5.0 Controls and Functions
5.1 Transmitter Panel
12345678910 11 12
Power Link Video ARC SPDIF
SELECT
IN/OUT
L/R
LOOP OUT /
AUDIO ONLY
HDMI OUT
HOST /
DEVICE
USB USB DEVICES
12
USB HOST
SERVICE
13 14 15 16 17 18 19 20 21 22
DC 24V LAN HDBT OUT
HDMI IN HDMI OUT
(eARC/ARC)
L/R
IN/OUT
SPDIF OUT
IR OUT
IR IN TX RX
RS232
Page 4
No. Name Function / Description
1 Power LED Red LED illuminates when the transmitter is power on
2 Link LED
●On: Transmitter and Receiver are connected successfully
●Flashing: Transmitter and Receiver are in low power mode
●Off: Transmitter and Receiver are not connected
3 Video LED
●On: The video signal is encrypted
●Flashing: The video signal is not encrypted
●Off: No HDMI input
4 ARC LED
●On: ARC is enabled
●Off: SPDIF is enabled
5 SPDIF LED
●On: SPDIF is enabled
●Off: ARC is enabled
6 Select Button Switches between ARC and SPDIF
7 L/R In/Out Switch Move to the left for L/R IN/OUT audio Embedding
Move to the Right for L/R IN/OUT audio De-Embedding
8 Loop Out / Audio Only
Switch to the left (Loop Out), the HDMI OUT port is the looped port of
the HDMI IN port.
Switch to the right (Audio Only), the HDMI OUT port outputs 720P black
screen image and the audio is from ARC or SPDIF
9 Host / Devices USB
Switch
Switch to the left (HOST), to enable USB host
Switch to the right (DEVICE) to enable USB devices.
10 USB Devices Connects to USB devices such as a keyboard and mouse
11 USB Host Connects to a USB host device such as PC
User ManualScion Tech SC05.8100VS
5.1 Transmitter Panel Continued…
No. Name Function / Description
12 Service Firmware updates only
13 DC 24V
DC 24 Volt @ 1 Amp
Note: Both transmitter and receiver support PoC (power over cable) and
therefore only one end requires power
14 LAN 1G Ethernet port
15 HDBT Out 10G port for connecting to the receiver using a single CAT6a/7 cable
16 HDMI In Connects to signal device and supports eARC and ARC
17 HDMI Out HDMI looped output or audio only depending on switch position
18 L/R In and Out Embedded or De-Embedded audio depending on switch position
19 SPDIF Out Fibre Optic output
20 IR Input Connect the IR Receiver cable for sending IR signals to the receiver
21 IR Output Connect the IR Blaster cable for receiving IR signals from the receiver
22 RS-232 Full duplex RS232 pass-through
Page 5
Page 6
User ManualScion Tech SC05.8100VS
5.2 Receiver Panel
11
123456
7
8910
12
Power Link Video ARC SPDIF
SELECT
HOST /
DEVICE
USB USB DEVICES
12
USB HOST
SERVICE
13 14 15 16 17 18 19
DC 24V LAN HDBT IN
HDMI OUT
(eARC/ARC)
L/R OUT
SPDIF IN
IR OUT
IR IN TX RX
RS232
No. Name Function / Description
1 Power LED Red LED illuminates when the transmitter is power on
2 Link LED
●On: Transmitter and Receiver are connected successfully
●Flashing: Transmitter and Receiver are in low power mode
●Off: Transmitter and Receiver are not connected
3 Video LED
●On: The video signal is encrypted
●Flashing: The video signal is not encrypted
●Off: No HDMI input
4 ARC LED
●On: ARC is enabled
●Off: SPDIF is enabled
5 SPDIF LED
●On: SPDIF is enabled
●Off: ARC is enabled
6 Select Button Switches between ARC and SPDIF
7Host / Devices USB
Switch
Switch to the left (HOST), to enable USB host
Switch to the right (DEVICE) to enable USB devices.
8 USB Devices Connects to USB devices such as a keyboard and mouse
9 USB Host Connects to a USB host device such as PC
10 Service Firmware updates only
11 DC 24V
DC 24 Volt @ 1 Amp
Note: Both transmitter and receiver support PoC (power over cable) and
therefore only one end requires power
12 LAN 1G Ethernet Port
User ManualScion Tech SC05.8100VS
5.2 Receiver Panel Continued…
No. Name Function / Description
13 HDBT In 10G port for connecting to the transmitter using a single CAT6a/7 cable
14 HDMI Out Connects to display device and supports eARC and ARC
15 L/R Out De-Embedded audio
16 SPDIF In Fibre Optic input
17 IR Input Connect the IR Receiver cable for sending IR signals to the transmitter
18 IR Output Connect the IR Blaster cable for receiving IR signals from the transmitter
19 RS-232 Full duplex RS232 pass-through
5.3 Input and Output Switching
The Extender can switch to ARC/SPDIF mode by pressing the SELECT button on the front panel of both
transmitter and receiver. The HDMI OUT port of the transmitter can turn to LOOP OUT or AUDIO ONLY
through the LOOP OUT/AUDIO ONLY switch. The input and output routing are different for different
scenarios, as shown in the diagrams below:
Scenario 1: Set the Extender to SPDIF Mode. Then switch the LOOP OUT/AUDIO ONLY switch to right, the
HDMI OUT port of the transmitter is set to AUDIO ONLY.
DVD
HDMI IN
ARC
AUDIO ONLY
AUDIO AMPLIFIER
SPEAKERS
TX RX
CATX DISPLAY
HDMI OUT
SPDIF IN
Page 7
User ManualScion Tech SC05.8100VS
Scenario 2: Set the Extender to SPDIF Mode. Then switch the LOOP OUT/AUDIO ONLY switch to the left, the
HDMI OUT port of the transmitter is set to LOOP OUT.
DVD
HDMI IN
ARC
LOOP OUT
AUDIO AMPLIFIER
TX RX
CATX DISPLAY
HDMI OUT
SPDIF IN
DISPLAY
SPDIF OUT
Scenario 3: Set the Extender to ARC Mode. Then switch the LOOP OUT/AUDIO ONLY switch to the right, the
HDMI OUT port of the transmitter is set to AUDIO ONLY.
Scenario 4: Set the Extender to ARC Mode. Then switch the LOOP OUT/AUDIO ONLY switch to the left, the
HDMI OUT port of the transmitter is set to LOOP OUT.
SOUND BAR WITH ARC HDMI IN
ARC
AUDIO ONLY
AUDIO AMPLIFIER
SPEAKERS
TX RX
CATX DISPLAY
HDMI OUT
ARC
TV WITH ARC
SPDIF OUT
HDMI IN
ARC
AUDIO AMPLIFIER
TX RX
CATX DISPLAY
HDMI OUT
ARC
TV WITH ARC
SPDIF OUT
SOUND BAR WITH ARC
Page 8
Page 9
User ManualScion Tech SC05.8100VS
SOUND BAR WITH ARC HDMI IN
eARC
AUDIO ONLY
AUDIO AMPLIFIER
SPEAKERS
TX RX
CATX DISPLAY
HDMI OUT
eARC
TV WITH ARC
SPDIF OUT
> 5.1 CH
Scenario 5: Set the Extender to eARC Mode. Then switch the LOOP OUT/AUDIO ONLY switch to the right, the
HDMI OUT port of the transmitter is set to AUDIO ONLY.
Scenario 6: Set the Extender to eARC Mode. Then switch the LOOP OUT/AUDIO ONLY switch to the left, the
HDMI OUT port of the transmitter is set to LOOP OUT.
SOUND BAR WITH ARC HDMI IN
eARC
AUDIO AMPLIFIER
TX RX
CATX DISPLAY
HDMI OUT
eARC
TV WITH ARC
SPDIF OUT
> 5.1 CH
NOTE: In eARC mode the SPDIF output only supports up to 5.1 CH audio.
User ManualScion Tech SC05.8100VS
5.4 Audio Embedding and De-Embedding
Transmitter Audio Embedding
When the L/R IN/OUT switch is in the left position, the audio from external audio device will be embedded to the
L/R IN/OUT port.
DVD
MP3 Player
HDMI IN
L/R IN
TX RX
CATX DISPLAY
HDMI OUT
Transmitter Audio De-Embedding
When the L/R IN/OUT switch is in the right position, the L/R IN/OUT port will output the de-embedded audio
from the HDMI IN port.
DVD
AUDIO AMPLIFIER
HDMI IN
L/R out
TX RX
CATX DISPLAY
HDMI OUT
Page 10
User ManualScion Tech SC05.8100VS
5.5 USB Applications
The extender supports USB 2.0 transmission and the Host/Device is configurable.
Mode 1. USB sent from the Transmitter to Receiver
Transmitter - Switch the HOST/DEVICE USB switch to the left, then power off and reboot the Transmitter to
enable the USB Host mode.
Receiver- Switch the DEVICE/HOST switch to the left, then power off and reboot the Receiver to enable USB
Device mode.
HOST COMPUTER
CATX
HDMI IN
USB HOST
LOOP OUT
USB DEVICES
TX RX
LOCAL DISPLAY
REMOTE DISPLAY
USB DEVICES
KEYBOARD & MOUSE
KEYBOARD & MOUSE
USB / HOST USB / DEVICES NO FUNCTION
HDMI OUT
Mode 2. USB sent from the Receiver to Transmitter
Transmitter - Switch the HOST/DEVICE USB switch to the right, then power off and reboot the Transmitter to
enable the USB Host mode.
Receiver- Switch the DEVICE/HOST switch to the right, then power off and reboot the Receiver to enable USB
Device mode.
Page 11
KEYBOARD & MOUSE
KEYBOARD & MOUSE
USB DEVICES USB DEVICES
HOST COMPUTER
REMOTE DISPLAY
LOCAL DISPLAY
NOTEBOOK
TX RX
USB HOST
HDMI OUT
USB / HOSTUSB / DEVICES
CATX
HDMI IN
USB HOST
NO FUNCTION
LOOP OUT
User ManualScion Tech SC05.8100VS
5.6 IR Pin Connections
IR Blaster IR Receiver
IR Blaster
IR Receiver
+ Positive
- Negative
IR Signal
Ground
Power 12V
Note: When the angle between the IR receiver and the remote control is +/- 45 degrees, the transmission distance
is 0-5 meters. When the angle between the IR receiver and the remote control is +/- 90 degrees, the transmission
distance is 0-8 meters.
Page 12
User ManualScion Tech SC05.8100VS
6.0 Application Drawing
LAN
LAN
LAN
TP-LINK
LAN
POWER LINK VIDEO ARC SPDIF
SELECT
IN/OUT
L/R
LOOP OUT /
AUDIO ONLY
HDMI OUT USB
HOST /
DEVICE
USB DEVICES
12
USB HOST
SERVICE
PC 1
DC 24V LAN HDBT OUT
HDMI IN HDMI OUT
(ARC/eARC)
L/R
IN/OUT
SPDIF OUT
IR IN IR OUT RX
TX
RS232
POWER SUPPLY
ROUTER DVD / BLU-RAY
TV OR AMPLIFIER
AUDIO AMPLIFIER
IR RECEIVER
IR BLASTER
HDMI MATRIX WITH RS232
PC 3
IR BLASTER
IR RECEIVER
SPEAKERS
TV WITH ARC /
eARC FUNCTION
PC 2
TRANSMITTER
RECEIVER
HDMI OUT
(ARC/eARC)
DC 24V LAN HDBT IN
L/R OUT
SPDIF IN
IR OUT
IR IN TX RX
RS232
SERVICE
USB HOST
KEYBOARD
MOUSE
12
DEVICE /
HOST
USB
SELECT
POWER LINK SPDIFARCVIDEO
CAT6A/7
Page 13
Table of contents
Other Scion Extender manuals
Popular Extender manuals by other brands
StarTech.com
StarTech.com ST128UTPE Specifications
webtrol
webtrol EZ Series Installation & operating manual
Belden
Belden thinklogical TLX Series product manual
Daxten
Daxten GE-EXT-PS2-100 brochure
TX RX Systems
TX RX Systems Signal Booster II 61-65-50 Series Installation and operation manual
Huawei
Huawei WS323 Quick start setup guide
