ScooterWorks Prima BBQ Rear Rack User manual

Instructions for Prima BBQ Rear Rack
SKU# 0200-0153
Parts:
Backrest, Rack Platform, Hardware
- Shorter bracket is for 4T Stellas
- Longer bracket is for 2T Stella or Vespa
4T Stella
Step 1:
Slide Backrest into rack platform.
Step 2:
Screw hardware in on under side of rack.

Step 3:
Attach mounting bracket (Detail shots below)
Step 4:
Attach underseat mounting bracket
Step 5:
Remove Underseat and Lower hardware

Step 6:
Attach underseat hardware
Step 7:
Attach hardware on lower bracket
Step 7:
Tighten all hardware
Step 8:
Enjoy your new Prima BBQ Rear Rack

2T Stella or Vespa
Follow Steps 1-3 From Above
Step 4:
Attach underseat mounting bracket
Step 5:
Remove Underseat and Tail Light hardware
Step 6:
Attach underseat hardware

Step 7:
Feed Electrical through tail light mount
Step 8:
Attach tail light mount
Step 9:
Attach tail light and tighten all hardware
Step 10:
Enjoy your new Prima BBQ Rear Rack and contact us with any inquiries.