Scosche RHYTHM+ 2.0 User manual

USER MANUAL
RHYTHM 2.0
©2020 SCOSCHE INDUSTRIES, INC. SI 300RTHM2.0 11/20
PERFORMANCE HEART RATE
MONITOR & BIOMETRIC SENSOR
!!WARNING!!
This is not a medical device and is
intended for training and recreational use
only. Consult a physician prior to use to
determine appropriate heart rate zones.
NOTICE: The RHYTHM+ 2.0 Heart
Rate Monitor is waterproof to IEC Standard
60529 IP67.It can withstand immersion in 1
meter of water for 30 minutes. Prolonged
submersion can cause damage to the unit.
This product is ANT+ certified and is
compatible with ANT+ displays that
support the following data:
Visit www.thisisant.com/directory
For the very latest documents go to scosche.com/rhythm20
including Bluetooth Smart help, recommended apps,
compatible devices, and troubleshooting.
Register
your product
online at
www.scosche.com/register
About Valencell
Valencell Precision Biometrics is a patent-protected sensor
technology which continuously measures real-time biometric
data with a high degree of accuracy and consistency, and
uses this data to give people meaningful tness assessments.
It seamlessly integrates into audio earbuds and other wearable
devices, such as armbands and wristbands, and can connect
with smartphone apps people are already using while exercising.
Valencell sensor technology allows you to capture accurate data
such as heart rate, distance, speed, cadence, calories burned and
VO2max (aerobic fitness level).
Patent: www.valencell.com/patents
RTHM2.0

2
GETTING STARTED
ARMBAND
MULTIFUNCTION
BUTTON (MFB)
Press & hold 2 seconds - turn on
Press & hold 3 seconds - turn off
USB
CHARGING
TERMINALS
HEART
RATE
SENSOR
FRONT VIEW
REAR VIEW
CHARGING
BASE
!!REMOVE
PROTECTIVE
STICKER!!
Charging
It is recommended to charge the RHYTHM+
2.0 fully before you use first use it. Charging
takes approximately 2 hours or until a solid
blue light indicates the unit is fully charged.
1. Attach the charging base to the
SCOSCHE®RHYTHM+ 2.0
unit (A).
2. Connect the USB to a wall
charger or your computer.
3. A red flashing LED indicates that
the unit is charging.
4. Remove the charging base as
shown (B).
LED INDICATOR
A
B

3
USING THE ARMBAND MONITOR
Initial Setup with Bluetooth Smart Fitness Apps
1. Set Bluetooth on the device to ON.
2. Find the Sensor Settings menu in the Bluetooth Smart
Fitness App.
3. Connect the RHYTHM+ 2.0 armband by turning it on.
Initial Setup with Bluetooth Smart devices
(Sports Watches & Fitness Equipment)
1. From the device settings menu select “Add HR sensor”
2. Connect the RHYTHM+ 2.0 armband by turning it on.
Initial Setup with ANT+ devices (Sports Watches &
Fitness Equipment)
Turn on the armband and move within range of your
display device.
LED Indicators (Bluetooth Smart Operation)
1. Alternating RED/BLUE – the armband is waiting for a
connection.
2. Three (3) BLUE blinks – the armband has connected
successfully.
3. Slow blink – the HR monitor is on and in normal operation.
LED Indicators (ANT+ Mode)
Slow blink – the HR monitor is on and in normal operation.
Note: Heart Rate Monitoring will work with most Bluetooth
Smart Fitness Apps. For a list of compatible Apps, please
visit www.scosche.com/rhythm-plus
UPPER
FOREARM
(recommended
placement)
BAND PLACEMENT
For the most accurate
readings, wear the
RHYTHM+ 2.0 on the
upper forearm,
biceps, or triceps
snug enough to
not move on your
arm, but NOT so
tight that it restricts
circulation.
1
2
TRICEPS
3
BICEPS

4
CARE INSTRUCTIONS
• Toensureaccuratereadings,cleanthesensorlenswith
a soft cloth.
• UseasoftclothwithONLYmildhandsoapandcoolwater
to wipe down the armband, sensors and plastic housing.
• UseacottonswabandONLYrubbingalcoholtoclean
the charging contacts.
• DonotuseanyabrasivechemicalstocleantheRHYTHM+
2.0 Armband, sensors or plastic housing. This will cause
permanent damage.
DISCLAIMERS
While our RHYTHM+ 2.0 Heart Monitors are state of the art, there are
inherent limitations with the technology that may cause some of the heart
rate readings to be inaccurate. Some circumstances that can influence the
readings are, but are not limited to, the user’s physical characteristics, the
fit of the device and the type and intensity of the exercise routine or activity.
The RHYTHM+ 2.0  Heart Monitor is not intended to diagnose, treat cure,
orpreventany disease.The RHYTHM+2.0 HeartMonitor hasaheartrate
tracking feature that may pose risks to users with certain health conditions.
Consult your doctor prior to use if you (1) have a medical or heart condition,
(2) are taking photosensitive medication, (3) have epilepsy or are sensitive
to flashing lights, (4) have reduced circulation or bruise easily, or (5) have a
musculoskeletal disorder. If you experience a medical emergency, stop using
the product and consult with a medical professional immediately. We are
not responsible for any health problems that may result from your use of the
RHYTHM+2.0HeartRateMonitors.IfyouusetheRHYTHM+2.0HeartRate
Monitors, you agree that you do so at your own risk.
Prolonged contact with wearable devices may contribute to skin irritation or
allergies in some users. To reduce irritation, follow three simple wear and care
tips: (1) keep it clean; (2) keep it dry; (3) don’t wear it too tight. If you notice any
skin irritation, remove the device. If symptoms persist longer than 2-3 days
after removing the device, consult your doctor.
For complete warranty details, please visit us
at www.scosche.com or call [phone]