Seaira Global WatchDog NXT85C Configuration guide

*Complete basic pump cleaning first. If that isn’t sufficient, complete the advanced cleaning.
Tools:
•Phillips Head Screwdriver OR #2 Phillips Drill
•Flathead Screwdriver
•Cleaning Solution (choose one of the following):
Option #1
• 4 ounces white vinegar
• 12 ounces water
Option #2
• 1 ounce bleach
• 15 ounces water
•Approx. 32 ounces clean water
•Paper Towels
1. First, mix your cleaning solution using one of the options listed above.
2. Press the drain button to drain any water from the reservoir.
2. Next, remove the side panel so you have access to the pump (the side with the sensor
vents). For more details on removing the side panel, check out the “How to Remove the Side
Panels” Guide.
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com
Advanced Pump Cleaning
WatchDog
NXT
85
600
c
/
c

3. Use the quick connect to remove the drain tube from the pump.
4. Next, remove the two screws holding the pump head in place, using a Philips head
screwdriver.
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com

5. Use a flathead screwdriver to lift the pump head off the reservoir.
6. Wipe the base of the pump clean using paper towels.
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com

7. Wipe the reservoir clean using paper towels.
8. Fill the pump reservoir with the prepared cleaning solution.
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com

9. Reassemble the pump, then use the manual drain button to flush mixture through the tubing.
10. Pour clean water into the drain tray until you hear the pump energize twice (typically 16-32
ounces).
11. Reassemble the unit.
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com