Seconique LUDLOW 55952 User manual

SEC/SW/03/23/DC1
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
•Please ensure allfittings and parts are present before commencing with assembly.
•We recommend that you lay a blanket or sheet on thefloor to avoid damage to both your
floor and the product.
•We strongly recommend that you keep children away from your work area.
•Assemble this product as close to itsfinal position as possible.
•Never drag or push products as this could cause damage to the joints making it inferior.
•Do not place this product next to a radiator or in direct sunlight.
•Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat.Therefore it is recommended that room temperature is maintained,
with no sudden temperaturefluctuations.
•Make sure any spillage is wiped o ffimmediately.
•Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
•For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time.This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
•From time to time it may be necessary to tightenfittings, regular inspections should be
carried out.
CARE AND MAINTENANCE
Page 01
FOR DOMESTIC USE ONLY
LUDLOW DINING CHAIR
ASSEMBLY INSTRUCTIONS
55952
GREY/OAK EFFECT
MAX CHAIR
WEIGHT
100KG

* Please check contents and read the instructions before commencing assembly.
* Assemble this product following the enclosed instructions carefully.
* Please take care to avoid damaging panels during assembly.
* Use of power tools to assemble this product will invalidate
any claim and damage this product making it unsafe !!!
* Please assemble on a clean soft surface to avoid damage.
Page 02
SEC/SW/03/23/DC1
Part Code
Part Number Part Description Quantity Carton
01
02
03
04
05
S400-401-162-DC1-01C Back Leg Le (Blue Marking) 21/1
Back Leg Right (Yellow Marking)
Back Seat Rail
Spindles
Back Rail
S400-401-162-DC1-02C
S400-401-162-DC1-03C
S400-401-162-DC1-04C
S400-401-162-DC1-05C
2
2
6
2
1/1
1/1
1/1
1/1
PARTS LIST
06
07
08
S400-401-162-DC1-06C
S400-401-162-DC1-07C
S400-401-162-DC1-08C
Front Seat Rail
Front Leg Le (Blue Marking)
Front Leg Right (Yellow Marking)
2
2
2
1/1
1/1
1/1
09
10
11
S400-401-162-DC1-09C
S400-401-162-DC1-10C
S400-401-162-DC1-11C
Side Seat Rail
Stretcher
Seat Pad
4
4
2
1/1
1/1
1/1
11
05
02
01
07
08
06
10
10
09
09
03
04 04 04

FITTINGS
Page 03
FITTINGS
C
B
A
12
08 28
3,5 x 35mm
7 x 60mm
E08
F
02 7 x 90mm
SEC/SW/03/23/DC1
08
G24
H
GLUE
D01 4 x 40mm
10 x 40mm
6 x 30mm
TOOLS REQUIRED

Glue must be added
to Parts 03 and 05.
STEP 2
Page 04
STEP 1
04 - x3
SPINDLES
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
06 - x1
FRONT SEAT RAIL
09 - x2
SIDE SEAT RAIL
STEP 2
03 - x1
BACK SEAT RAIL
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
04 - x3
SPINDLES
05 - x1
BACK RAIL
10 - x2
STRETCHER
SEC/SW/03/23/DC1
09
10
06
04
x2
x2
x3 F
F
F
F
F
F
G
G
GG
A01
GLUE
F10
G12
10 x 40mm
6 x 30mm
05
04 04 04
03
F
F
F
F
A01
GLUE
F04
10 x 40mm
Glue must be added
to Parts 04, 06, 09 and 10.

STEP 2
Page 05
STEP 3
01 - x1
BACK LEG LEFT (BLUE)
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
GLUE
E02
07 - x1
FRONT LEG LEFT (BLUE)
09 - x1
SIDE SEAT RAIL
STEP 4
10 - x1
STRETCHER
A01
Glue must be added
to Parts 01 and 07.
SEC/SW/03/23/DC1
01
07
10
09
02
08
09
10
E
E
D
H
H
H02
7 x 90mm
4 x 40mm
7 x 90mm
7 x 60mm
02- x1
BACK LEG RIGHT (YELLOW)
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
GLUE
E02
08- x1
FRONT LEG RIGHT (YELLOW)
09- x1
SIDE SEAT RAIL
10- x1
STRETCHER
A01
Glue must be added
to Parts 02 and 08.
H02
7 x 90mm
4 x 40mm
7 x 90mm
7 x 60mm
E
D
H
H
E

STEP 2
Page 06
STEP 5
06 - x1
FRONT SEAT RAIL
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
GLUE
C03
STEP 6
A01
Glue must be added
to Part 01 and 07.
SEC/SW/03/23/DC1
7 x 90mm
7 x 60mm
PARTS REQUIRED
Glue must be added
to Parts 02 and 08.
05
06
04 04 04
01
03
C
C
C
D
7 x 60mm
07
02
08
C
C
C
D
TOOLS REQUIRED
HARDWARE REQUIRED
GLUE
C03
A01
7 x 60mm
7 x 90mm
7 x 60mm

Please allow at least
6 hours for the glue to
dry before using your
new chairs. If you don't
follow these instructions
it will affect the strength
of the chair and might
void your warranty.
IMPORTANT NOTICE
STEP 2
Page 07
STEP 7
11 - x1
SEAT PAD
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B04
STEP 8
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
CENTRALIZE
xxxx
SEC/SW/03/23/DC1
11
B
3,5 x 35mm
MAX CHAIR
WEIGHT
100KG

IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be returned
Assemble this product as close to its final position as possible.
Do not drag or push items across your furniture as this may cause the surface to scratch.
Do not place this product next to a radiator or in direct sunlight.
sudden temperature fluctuations.
Do not place hot or chilled items directly on to the surface, use a place mat or marking will
For general cleaning use a soft cotton or micro fibre cloth, and do not use detergents of any kind.
From time to time it may be necessary to tighten fittings, regular inspections should be carried
for any reason.
and the product.
subjected to heat. Therefore it is recommended that room temperature is maintained, with no
out.
FOR DOMESTIC USE ONLY
Page 01
LUDLOW DINING TABLE
ASSEMBLY INSTRUCTIONS
SEC/SW/03/23/DC1
GREY/OAK EFFECT 55952

SEC/SW/03/23/DC1
* Please check contents and read the instructions before commencing assembly.
* Assemble this product following the enclosed instructions carefully.
* Please take care to avoid damaging panels during assembly.
* Use of power tools to assemble this product will invalidate
any claim and damage this product making it unsafe !!!
* Please assemble on a clean soft surface to avoid damage.
Page 02
03
02
02
03
05
05
04
04
01
Part Code
Part Number Part Description Quantity Carton
01
02
03
04
05
S400-401-162-DC1-01T Table Top 11/1
Table Leg (Blue Marking)
Table Leg (Yellow Marking)
Frame Side
Frame Side (Blue Marking)
S400-401-162-DC1-02T
S400-401-162-DC1-03T
S400-401-162-DC1-04T
S400-401-162-DC1-05T
2
2
2
2
1/1
1/1
1/1
1/1
PARTS LIST

FITTINGS
Page 03
FITTINGS
SEC/SW/03/23/DC1
F08
GLUE
8 x 40mm
C
B
A
04
08 04
3,5 x 35mm
D01
E
01
7 x 110mm
7 x 70mm
TOOLS REQUIRED

STEP 2
Page 04
STEP 1
04 - x1
FRAME SIDE
PARTS REQUIRED
TOOLS REQUIRED
05 - x1
FRAME SIDE (BLUE)
STEP 2
02 - x2
TABLE LEG (BLUE)
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
GLUE
A01
C04
03 - x2
TABLE LEG (YELLOW)
05 - x2
FRAME SIDE (BLUE)
Glue must be added
to Parts 02 and 03.
04
05 x2
x2
Glue must be added
to Parts 04 and 05.
SEC/SW/03/23/DC1
HARDWARE REQUIRED
A01
GLUE
F08
8 x 40mm
F
F
F
F
02
03
05 x2
C
C
C
D
7 x 110mm
7 x 70mm
7 x 110mm

STEP 2
Page 05
STEP 3
04 - x2
FRAME SIDE
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
GLUE
A01
E04
STEP 4
01 - x1
TABLE TOP
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B08
Glue must be added
to parts 02 and 03.
SEC/SW/03/23/DC1
04
04
E
E
E
E
D
7 x 110mm
7 x 70mm
x2
02
02
03
03
7 x 70mm
01
B
BB
B
B
B
B
3,5 x 35mm