Seconique Corona SECWG1116MY1 User manual

IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
floor and the product.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped off immediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
CARE AND MAINTENANCE
ASSEMBLY INSTRUCTIONS
PAGE 1
IMPORTANT
!
PRODUCT SAFETY
INFORMATION
See Important Information Overleaf
FOR DOMESTIC USE ONLY
HI FI Unit

01
02
03
04
05
06 07
08
09
10
05
06
01 Top panel 01
02 Left side panel
03 Right side panel
04 Base
06 Right/Left Side Plinth
05 Shelf
01
01
01
02
02
07 Front frame
09 Door
08 Front Plinth
10 Back panel
01
01
01
01
11 Hardware Kit
01
11
PAGE 2

FITTINGS
* Please check contents and read the instructions before commencing assembly.
* Assemble this product following the enclosed instructions carefully.
* Please take care to avoid damaging parts during assembly.
18
A
27
B
12
C
18
D
E
F
G
01
02
01
8x30
3,5x30
10x10
3/16x5/8
3,5x16
BLACK
BLACK
BLACK
H12
01
04
A
A
A
A
A
A
03
A
A
A
A
A
A
A
H
H
H
H
H
H
02
A
A
A
A
A
A
H
H
H
H
H
H
I
I
I
G
I
II
G
09
09
E
E
C
F
CCC
F
C
F
G
A18
8x30
C06
3,5x16
EF02 G
H12
* Use of power tools to assemble this product will invalidate
any claim and could damage this product making it unsafe!!!
* Please assemble on a clean soft surface to avoid damage.
PAGE 3
I
04
3,5 X 14 CC
3,5 X 14 CC
I04
J
01
IMPORTANT
!
PRODUCT SAFETY
INFORMATION
See Important Information Overleaf
THIS UNIT COMPLIES WITH BS14749: 2005
MANUFACTURERS MODEL NO: CORONA GLASS
DRESSER
IMPORTER:
DATE OF MANUFACTURER:
THE GLASS PANELS IN THE DOOR SECTIONS ARE TOUGHENED
GLASS WITH A NOMINAL THICKNESS OF 4MM. IF THE GLASS
IS CHIPPED OR BROKEN, PLEASE CONSULT WITH THE
RETAILER STATING THE MODEL DETAILS.
MAXIMUM LOAD ON GLASS PANEL IS 8KGS IN WEIGHT.
DO NOT SIT OR STAND ON GLASS SURFACES DO NOT USE
GLASS AS CHOPPING SURFACE. DO NOT STRIKE GLASS
WITH HARD OR POINTED ITEMS.
TO CLEAN GLASS PANELS USE A DAMP CLOTH OR LEATHER
WITH WASHING UP LIQUID OR SOFT SOAP. DO NOT USE
WASHING POWDER OR OTHER SUBSTANCES CONTAINING
ABRASIVES SINCE THESE SUBSTANCES WILL SCRATCH THE
GLASS.
Front
Back
K
2x
1x
1x
01
01

04
B06
3,5x30
B
B
B
B
B
B
02
03
04
07
02
B06
3,5x30
B06
3,5x30
03
B
B
B
01
* Use of power tools to assemble this product will invalidate
any claim and could damage this product making it unsafe!!!
* Please assemble on a clean soft surface to avoid damage.
PAGE 4

06
05
07
C06
3,5x16
D15
10x10
B09
3,5x30
06
06
08
10
09
0000
* For your future reference
SPD Number should be here
PAGE 5