Seconique SILVER VENTURA User manual

VENTURA 3' BUNK BED
SAFETY WARNING
-All bunk beds and high beds intended to be assembled by someone other that the
manufacturer or their representative shall contain assembly instructions a
list of the parts supplied and details of any tools required to assemble the bed.
-We recommend that you use the mattress at size: 1900x900x160mm.
-All assembly fastenings should always be tightened properly and that care should be
taken that no fittings are loose.
-Instructions regarding positioning and connection of the means of access.
-The ladder is not for playing on, only use to climb onto the top bunk.
-We recommend only one person on the upper bunk at one time.
-Warning:- The bunk bed or high bed should not be used if any structural part is
broken or missing.
-The top of the mattress shall be at least 160mm below the upper edge of the safety
barriers.
-Warning:- Children can become trapped between the bed and the wall to avoid risk of
serious injury the distance between the top safety barrier and the wall shall not
exceed 75mm or shall be more than 230mm.
-Warning: Bunk beds and high beds can present a serious risk of injury from
strangulation if not used correctly. Never attach or hang items to any part of the
bunk bed that are not designed to be used with the bed, for example, but not limited
to ropes, strings, cords, hooks, belts and bags.
-The ventilation of the room is necessary in order to keep the humidity low and to
prevent mold in and around the bed.
-The manufacturer’s instruction must be always followed.
-EN 747-1&2:2012+A1:2015 TEST version.
SEC/SH/10/22/RJ2
SILVER
ASSEMBLY INSTRUCTIONS
TOP BUNK
MAX WEIGHT
100KG
BOTTOM BUNK
MAX WEIGHT
100KG

SEC/SH/10/22/RJ2
Page 02
PARTS LIST
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
Part Code
Part Number Part Description Quantity Carton
1
2
S200-205-017-RJ2-01 Upper Bed Post 1 21
Neutral Post
S200-205-017-RJ2-02 41
3
4
5
6
7
8
S200-205-017-RJ2-03 Lower Bed Post 21
Headboard/Footboard
S200-205-017-RJ2-04 41
S200-205-017-RJ2-05 Lower Front Bed Rail 11
Lower Back Bed Rail
S200-205-017-RJ2-06 11
S200-205-017-RJ2-07 Middle Bed Rail 21
Upper Front Guardrail
S200-205-017-RJ2-08 11
33
97
11
11
6
x2
x21
x21
x2
9
10
11
12
13
S200-205-017-RJ2-09
S200-205-017-RJ2-10
S200-205-017-RJ2-11
S200-205-017-RJ2-12
S200-205-017-RJ2-13
Upper Back Guardrail
Slats
Fixed Slats
Ladder
Upper Bed Post 2
1
1
1
1
1
1
42
4
1
2
10
8
14 S200-205-017-RJ2-14 Lower Bed Post 2 1
2
12 2
2
2
2
4
4
4
4
10
14
13
13
1
3
3
1
14 5
7

SEC/SH/10/22/RJ2
Page 03
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
HARDWARE LIST
A
B
19PCS
4PCS
M6 x 70mm Bolt
M6 x 55mm Bolt
HARDWARE NAME QTY
REF
D
E
8PCS
24PCS
M6 x 16mm Bolt
M6 x 12mm Bolt
G
H
19PC
8PCS
18 x 6.5mm Washer
Plastic Post Insert
F
4PCS
4PCS
M6 x 40mm Bolt
M6 Nut
J
K
1PC
2PC
Allen Key M4
Plastic Cap
I1PC
M10 Spanner
TWO PEOPLE ARE NEEDED TO ASSEMBLE THIS BUNK BED.

STEP 1
STEP 2
SEC/SH/10/22/RJ2
Page 04
3 - x1
LOWER BED POST
PARTS REQUIRED
HARDWARE REQUIRED
4 - x1
HEADBOARD/FOOTBOARD
TOOLS REQUIRED
HARDWARE REQUIRED
E04
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
E
E
E
E
3
14
4
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
14 - x1
LOWER BED POST 2
3 - x1
LOWER BED POST
PARTS REQUIRED
HARDWARE REQUIRED
4 - x1
HEADBOARD/FOOTBOARD
TOOLS REQUIRED
HARDWARE REQUIRED
E04
14 - x1
LOWER BED POST 2
E
E
E
E
4
14
3
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm

STEP 3
STEP 4
SEC/SH/10/22/RJ2
Page 05
6 - x1
LOWER BACK BED RAIL
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
10 - x21
SLATS
PARTS REQUIRED
7 - x1
MIDDLE BED RAIL
A04
11 - x2
FIXED SLATS
C
C
A
A
G
G
AA
G
G
6
7
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
11
11
10
10
10
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
C02
G04
HARDWARE REQUIRED
TOOLS REQUIRED
D02
D
D

STEP 5
STEP 6
SEC/SH/10/22/RJ2
Page 06
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
1 - x1
UPPER BED POST 1
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
E04
D02
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
4 - x1
HEADBOARD/FOOTBOARD
13 - x1
UPPER BED POST 2
D
D
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
5 - x1
LOWER FRONT BED RAIL
E
E
E
E
1
13
4
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
A
A
G
G
AA
G
G
5
G04
A04

STEP 7
STEP 8
SEC/SH/10/22/RJ2
Page 07
1 - x1
UPPER BED POST 1
PARTS REQUIRED
4 - x1
HEADBOARD/FOOTBOARD
PARTS REQUIRED
7 - x1
MIDDLE BED RAIL
E
E
E
E
13
1
4
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
13 - x1
UPPER BED POST 2
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
E04
C
C
A
A
G
G
AA
G
G
A
G
A
9 - x1
UPPER BACK GUARDRAIL
HARDWARE REQUIRED
TOOLS REQUIRED
A06
C02
G06
7
9
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm

D02
STEP 9
STEP 10
SEC/SH/10/22/RJ2
Page 08
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
10 - x21
SLATS
11 - x2
FIXED SLATS
D
D
11
11
10
10
10
8 - x21
UPPER FRONT GUADRAIL
K
K
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
K02
A
G
A
G
A
G
A
G
A
G
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
D
D
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
A05
D02
G05
8

E
E04
STEP 11
STEP 12
SEC/SH/10/22/RJ2
Page 09
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
PARTS REQUIRED
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
2 - x4
NEUTRAL POST
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
E
E04
HARDWARE REQUIRED
TOOLS REQUIRED
2
2
2
2

B04
STEP 13
STEP 14
SEC/SH/10/22/RJ2
Page 10
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
PARTS REQUIRED
M6x12mm
M6x16mm
M6x40mm
M6x55mm
M6x70mm
12 - x1
LADDER
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
HARDWARE REQUIRED
TOOLS REQUIRED
NOW FULLY TIGHTEN ALL BOLTS !!
B
B
B
B
F
F
FF
F04

H04
STEP 15
STEP 16
SEC/SH/10/22/RJ2
Page 11
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
PARTS REQUIRED
H04
HARDWARE REQUIRED
TOOLS REQUIRED
THE BUNK BED CAN BE SPLIT INTO TWO SINGLE BEDS.
THE BUNK BED CAN BE SPLIT INTO TWO SINGLE BEDS.
BOTTOM BUNK
MAX WEIGHT
100KG
TOP BUNK
MAX WEIGHT
100KG