Prepac HFQ-0500-1 User manual

Double / Queen
Headboard
Model # HFQ-0500-1
Assembly Instructions
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0727
2015-11-16
DATE STAMP
This product is shipped in
1 carton
Required Tools Optional Tools
Using a power screwdriver will
speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by
hand.
CONTACT US FIRST
[email protected]
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
nFor help with assembly
nIf you have received a damaged or defective
part or are missing hardware.
We will process replacement parts in 2 business
days or less.Parts are shipped via UPS Ground
or mail.
Before you call please:
1) Record the following information from the
shipping label on the outside of the box.
You will need it for warranty purposes:
n Ship To Name
n Sales Order Number
2) Note the product model number.
3) Review the contents of your shipment to
determine what you are missing.
Online Option
Fill out the Replacement Parts Order form in the Product
Support section of our website: www.prepacmfg.com
Pour le service en français, contactez s’il vous plaît votre détaillant.

Page 2 of 12
24mm Green
Twister Dowel (28)
Goujon de torsion vert
RM-0501
15mm Zinc Cam (large) (28)
Ferrure en zinc grand
RM-0103
Cam Cover Cap (10)
Capuchons de came
RM-0807 ebony / ébène*
RM-0809 white / blanc
Confirmat Screws (4)
Vis Confirmat
RM-0001
¾” Nail (28)
Clou ¾”
RM-0022
#8 -1 1/8” Washerhead Wood
Screws (6)
Vis en bois no.8
1-1/8 po.
RM-0520
Hardware Identification Identification de quincaillerie

Page 3 of 12
H3
H8
B11H11
B11
H10
H1
H2
H4
H5
H6
H9
H7
24mm Green
Twister Dowel (28)
Goujon de torsion vert
RM-0501
15mm Zinc Cam (large) (28)
Ferrure en zinc grand
RM-0103
Cam Cover Cap (10)
Capuchons de came
RM-0807 ebony / ébène*
RM-0809 white / blanc
Confirmat Screws (4)
Vis Confirmat
RM-0001
¾” Nail (28)
Clou ¾”
RM-0022
#8 -1 1/8” Washerhead Wood
Screws (6)
Vis en bois no.8
1-1/8 po.
RM-0520
Headboard Parts Pièces de tête de lit
Top (1)
Dessus
TP-10045-H
washed black / noir délavé
TP-10045-W
white / blanc
Inner Gables (2)
pignons intérieur
GA-10047-H
washed black / noir délavé
GA-10047-W
white / blanc
Backer (1)
Dos
BB-10038-H
washed black / noir délavé
BB-10038-W
white / blanc
Fixed Shelf (1)
étagère fixe
SH-10043-H
washed black / noir délavé
SH-10043-W
white / blanc
Left Side (1)
Côté gauche
SL-10048-H
washed black / noir délavé
SL-10048-W
white / blanc
Right Side (1)
Côté droit
SR-10048-H
washed black / noir délavé
SR-10048-W
white / blanc
Headboard Panel (1)
panneau de tête de lit
HB-10038-H
washed black / noir délavé
HB-10038-W
white / blanc
Front Stabilizer (1)
Renforcements avant
ST-10051-H
washed black / noir délavé
ST-10051-W
white / blanc
Lower Left Stabilizer (1)
Renforcement inférieur
ST-10052-H
washed black / noir délavé
ST-10052-W
white / blanc
Lower Right Stabilizer (1)
Renforcement inférieur
ST-10053-H
washed black / noir délavé
ST-10053-W
white / blanc
Side Moulding (2)
Moulure latérale
TR-10023-H
washed black / noir délavé
TR-10023-W
white / blanc
H6
H2
H4
H1 H3
H7
H8 H9 B11H11
H5
B11
H10
H2
B11H11

Page 4 of 12
Step 1 Estimated Time: 10 Minutes
1a 1b
Green Twister Dowel
Goujon de torsion vert
Tightening Cams
Serrez les ferrures
Unlocked
deverrouillé
Locked Turn 210º
verrouillé
tourner 210º
Front
Devant
Insert small cams in the unlocked position,
with the opening facing toward the hole for
the twister dowel.
Insérez les ferrures petites dans la position
déverrouillée, de façon à ce que l’overture
soit face au trou de gougon de torison.
Screw 2 of the green twister dowels into the
fixed shelf (H4) where shown
Vissez deux des goujons de torison vert à
l’étagère fixe (H4) comme montre
Insert cams into the back of the headboard panel (H7)
and the bottom of the fixed shelf (H4) where shown
Insérez les ferrures dans le dos du panneau de tête de
lit (H7) et le bas du l’étagère fixe (H4) comme montre
H4
H7
1c Attach the headboard panel (H7)
to the fixed shelf (H4)
Attachez le panneau de tête de lit
(H7) au l’étagère fixe (H4)
H4
H7
Lock cams using a flat
head screwdriver.
Serrez les ferrures
utilisant un tournevis
principal plat

Page 5 of 12
Step 2 Estimated Time: 10 Minutes
Front
Devant
2a Screw green twister dowels into the
side moldings (H11) where shown
Vissez les goujons de torison vert
aux moulures latéral (H11) comme
montre
Insert cams into the the left (H5) & right (H6) sides
Insérez les ferrures aux côtés gauche (H5) et droit (H6)
2b
Attach side moldings (H11) to each side and
lock cams using a flat head screwdriver.
Attachez les moulures latéral (H11) à chaque
côté et serrez les ferrures utilisant un tournevis
principal plat
B11H11
B11H11
H6
H5
Green Twister Dowel
Goujon de torsion vert
2c
Note: molding
overhangs toward
the inside
Note : la moulure
surplombe vers
l’intérieur
FRONT
DEVANT
FRONT
DEVANT
B11H11
B11H11