11
SECURA AUTOMATIC MILK FROTHER
Copyright © 2015 – Secura Inc. - All rights are reserved. http://www.thesecura.com
Cleaning and Care
Always remove the container from the power swivel base before you begin to clean it.
Do not immerse the container or the power base in water or any other liquid.
•The container. Always clean after each use. To do this, rinse the interior with warm, soapy
water. Use a soft cloth to wash. Dry with a clean cloth.
• The lid. Remove the silicon ring and then wash each piece, rinsing thoroughly. Assemble the
lid for easier storage.
• The exterior of the frother. This should only be wiped with a dry, soft cloth.
Note: Never make use of sharp edges, scrubbing brushes or any abrasive materials on the
milk frother. Do not use abrasive cleaners on the exterior or the interior of the frother.
This could scratch the stainless steel exterior and damage the non stick surfaces on
the interior.
• The whisks. Remove the whisks and then wash them in warm, soapy water. Be sure to
dry them thoroughly before storage. Do not place the whisks or any part of the frother in the
dishwasher. Always store the whisks in a safe place out of the reach of children.
Remove milk residue inside the container and around the axle using soft brush comes with the
product. Milk residue may cause malfunction if not cleaned properly.
1. Pour just enough water into the milk frother (just immerse the axle sleeve )
2. Insert the brush into the bottom of axle sleeve.
3. Turn the brush 360° around the axle to remove milk residue.
Disposal
When the appliance has reached the end of its life, please be responsible with its disposal.
This and other electrical appliances contain valuable material and can be dangerous to the
environment if not disposed properly. We ask that you follow the rules and regulations of your
town as far as disposing of electric appliances. Please endeavor to take the appliance to an
authorized recycling facility near you.
Other Useful Information
