SecuX W10 User manual

Introduction
P. 1 P. 2 P. 3
The SecuX W10 Hardware Wallet (the device) is designed to
help you receive, send and manage your crypto assets.
This guide includes:
• Safety and Security Information
• Package Contents
• Device Setup
• How to Connect to Computer
For more information, please visit:
http://www.secuxtech.com/howitworks/
or scan the QR code.
You can also email suppor[email protected]
• Do not use in wet locations, such as near a sink, bathtub,
or shower stall, and don’t connect or disconnect the
device’s USB port with wet hands.
• Always handle the device with care. Do not throw, drop,
smash the device or engage in any activities that may
cause physical damage to the device.
• The device may become warm during charging or normal
use. Disconnect immediately if you suspect irregular
overheating.
• Dry and slightly damp soft cloth or cotton can be used
for cleaning the surface of the device. Do not use alcohol,
other cleaning agent or any abrasive material to clean
the device.
IMPORTANT! Failure to follow these safety and security
instructions could result in hacking threats, theft, or
unrecoverable lost of funds.
Safety Information
Security Information
• Do not use the device if you suspect any illegal activities
regarding your computer or mobile phone / tablet.
• Do not store or share any security information online
regarding your PIN, password, recovery words or crypto
assets.
• Do not save your recovery words on your mobile phone,
hard drive or digital storage which may carry risks of
malware, damage, loss or theft.
• Do not initialize, restore your device, or write down your
recovery words in a public place where you may be
exposed to public viewing and cameras.
• Keep your recovery sheets in a safe place away from
water and fire.
Make sure the SecuX tamper-proof sealing tape are intact,
have not been broken, torn, or tampered with, both on the
box and the device’s USB port.
Check Your Package
Box
Device
USB port
Intact Tampered
Each Box Contains
•1x SecuX W10
Hardware Wallet
• 1x USB cable
Prepare for Setup
Before you start, you will need:
• Pen (permanent ink preferable)
• Computer (Mac OS 10.13.6+, Windows 10, Linux or
Chrome OS) with the following browser installed
(Chrome V.71+ or Opera V.57+)
• A personal device name for your SecuX W10 hardware
wallet
• A safe and secure place to store your recovery sheets
• Your unique BIP32, BIP39 and BIP44-compliant 12, 18,
or 24 recovery words (if restoring from an existing wallet)
How it works
P. 4
• 1x SecuX black pouch
• 2x Recovery sheets
• 1x Quick Start Guide
Device Setup
STEP 1 - Power On
Connect your SecuX W10 device to your computer with
the USB cable included in the package.
STEP 2 - PIN Setup
Enter a 4-8 digit number as your PIN. Enter the same
number again to confirm.
NOTE: The device will reset itself after 5 unsuccessful
attempts to enter the correct PIN number.
STEP 3 - Create Device Name
Create a name for your device with 1-15 upper and
lowercase English letters. The name will be used for
recognizing the device during USB connection.
STEP 4 - Setup as a New Device / Recover from an
Existing Wallet
Press YES if you are setting up a new device.
Press NO if you are recovering from an existing wallet.

v1.0P. 5 P. 6
W10 Hardware Wallet
Quick Start Guide
Setup as a New Device: The device begins to generate your
unique 24 recovery words. Write each word down carefully
on your recovery sheets in the correct order. You will be
prompted to re-enter the words for confirmation.
How to Connect to Computer
USB
STEP 1 - Connect with USB
Unlock your wallet and connect to your
computer via the USB cable included.
STEP 2 - SecuXess Login
Go to SecuXess from SecuX Official
Website with one of the supported
browsers, choose your connection (USB)
then your device name.
For further instructions on how to manage your crypto,
please visit our website:
http://www.secuxtech.com/howitworks/
P. 7
STEP 5 - Getting Your Wallet Ready
The device generates your private key from your unique 12,
18 or 24 recovery words, do not turn off before the process
is complete.
Congratulations! Your wallet is set up successfully.
NOTE: If you failed to confirm recovery words for more
than 15 times, the device will automatically go back to
STEP 4 in order to generate a new set of 24 recovery
words.
Recover from an Existing Wallet: Enter your 12, 18 or 24
recovery words from an existing wallet in the correct order.
IMPORTANT: In the event of theft, loss or damage to the
device, you can always recover your digital assets with your
unique 24 recovery words. Make sure your recovery sheets
are stored in a safe and secure place away from potential
risks.
Need Help?
Email [email protected]
82-001-300010
Computer W10
Need Help?
Email [email protected]