Sega BG-SSC-004 User manual

Version 010314
Sonic Kiddie Ride
BG-SSC-004 Kiddie Ride Owners Manual
Assembly operation and care instructions.
Serial #
Distributed By
Sales Person
Technical Service #
Dimension: L215 cm x W115 cm x H130 cm
Weight: 155 Kg
Voltage: 110V AC, 60Hz, .5A | 220V AC, 50Hz, .5A

Parts replacement, maintenance inspections and troubleshooting should
be carried out by site maintenance personnel or other qualified
professionals. This manual includes directions for potentially dangerous
procedures which should only be carried out by professionals with the
appropriate specialised knowledge.
The site maintenance personnel or other qualified professionals
mentioned in this manual are defined as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending
machines, etc., working under the supervision of the owner/operator of
this product to maintain machines within amusement facilities or similar
premises by carrying out everyday procedures such as assembly,
maintenance inspections, and replacement of units/expendable parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance
inspection and replacement of units/expendable parts.
Other qualified professionals:
Persons employed by amusement equipment manufacturers, or involved
in design, production, testing or maintenance of amusement equipment.
The individual should have either graduated from technical school or hold
similar qualifications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualified professionals:
Amusement equipment/vending machine assembly, repair/adjustment of
electrical/electronic/mechanical parts.
Definition of 'Site Maintenance Personnel
or Other Qualified Individuals
Servicing and maintenance work of the contents herein stated should be
performed by the SERVICEMAN stipulated as per IEC Standard. Those who do
not have technical expertise and knowledge other than the SERVICEMAN are not
allowed to perform the work herein stated. Executing aforementioned work by
such non-technical personnel can cause serious accidents that may endanger life.
WARNING
1

Safety Instructions for use and play.
Risk of Electric Shock
Playing Warnings
Hazardous voltage which can cause electrical shock
exists inside the equipment. Only qualified personnel
should work inside the equipment.
Spectators should not climb on the ride. This may
cause injury.
This game features flashing lights which may not be
suitable for photosensitive epilepsy.
Once you place the ride in it’s desired location please ensure
that the 4 rubber stopper legs are all the way the floor and the
car is not supported by the wheels.

Before using this product
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge
of the operation of the product. After carefully reading and sufficiently understanding the
warning displays and cautions, handle the product appropriately. Be sure to keep this
manual for future reference.
Perform work in accordance with the instructions herein stated. Instructions for work are
explained by paying attention to the aspect of accident prevention. Failing to perform work
as per the instructions can cause accidents. In the case where only those who have technical
expertise should perform the work to avoid hazardous situation, the instructions herein state
that the site maintenance personnel should perform such work.
• Be sure to turn off the power before working on the machine. To prevent an electric shock,
be sure to turn off the power before carrying out any work that requires direct contact with
the interior of the product. If the work is to be performed in the power-on status, the
Instruction Manual herein always states to that effect.
• Be sure to ground the Earth Terminal. (This is not required in the case where a power cord
with earth is used.)
• This product is equipped with the Earth Terminal. When installing the product, connect the
Earth Terminal to the "accurately grounded indoor earth terminal" by using an earth wire.
Unless the product is grounded appropriately, the user can be subject to an electric shock.
After performing repair, etc. for the control equipment, ensure that the Earth Wire is firmly
connected to the control equipment.
• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This
product does not incorporate the Earth Leakage Breaker. Using a power supply which is not
equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
• Be sure to use fuses which meet the specified rating. (Only for the machines which use
fuses.) Using fuses exceeding the specified rating can cause a fire and an electric shock.
(Only for the machines which use fuses.)Using fuses exceeding the specified rating can
cause a fire and an electric shock.
• Ensure that the product meets the requirements of appropriate electrical specifications.
Before installing the product, check for electrical specifications. Ensure that the product is
compatible with the power supply voltage and frequency requirements of the location.
Using any electrical specifications different from the designated specifications can cause a
fire and an electric shock.
2

• Install and operate the product in places where appropriate lighting is available, allowing
warning labels to be clearly read. To ensure safety for the customers, labels and printed
instructions describing potentially hazardous situations are applied to places where
accidents can be caused. Ensure that where the product is operated has sufficient lighting
allowing the warnings to be read. If any label is peeled off, apply it again immediately.
Please place an order from office herein stated.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE
PRODUCT TO THE LOCATION
Before turning on the power, check the following points to ensure that the product has been
transported in a satisfactory status.
• Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
• Are casters and adjusters damaged?
• Do the power supply voltage and frequency requirements meet with those of the location?
• Are all wiring connectors correctly and securely connected? Unless connected in the correct
way, connector connections can not be made accurately. Do not insert connectors forcibly.
• Do power cables have cuts and dents?
• Are all accessories available?
• Can all doors/lids be opened with the accessory keys? Can doors/-lids be firmly closed?
3

Sonic Body Assembly Instructions
Insert Sonic
with Bolts Here
Insert Sonic
with Bolts Here
Insert Sonic
with Bolts Here
Insert Sonic
with Bolts Here
Insert Sonic
with Bolts Here
1. Locate Sonic Body holes
2. Place Sonic Body on guiding the 6 bolts into location.
Sonic Body Bolt Holes
4

Access Panel Bolts
Sonic Body Assembly Instructions Cont.
4. Using the access hole, place the nuts on the
6 mounting bolts. Do not over tighten bolts.
3. Open the Access Panel on the Rear of the Car.
5

Steering Wheel Access
1. To access the main Steering Wheel bolt remove
the 3 screws holding on the plastic center cap.
2. Then loosen the center bolt.
3. To put the steering wheel back on tighten the
steering wheel bolt and put the center cap back on.
Steering Wheel Center Cap Bolts
6

LED Light Replacement
LED Wheel Cover Access Screws
LED Light Cover Access
1. To access the main Steering Wheel bolt remove
the 3 screws holding on the plastic center cap.
7

Insert Coin and
Push START to Start Ride
Hold Steering Wheel
ATTENTION
PLEASE DO NOT leave children
unattended. Children MUST be
seated and supervised at all
times or injuries may occur.
ATTENTION
PLEASE DO NOT leave children
unattended. Children MUST be
seated and supervised at all
times or injuries may occur.
Warning Sticker Placement
ATTENTION
DO NOT CLIMB
MODEL
VOLTAGE
FREQUENCY
FUSE
SERIAL NO
SPECIAL
SPEC
SONIC CAR
AC110/120V POWER .5A [237W]
50/60 Hz DATE 12/20/2013
3.15A WEIGHT 155 Kg
BG-SGKDXXXX
FENG YUNG CHENG CO., LTD (FYC)
9F-1, NO.48, TIEN SHUI RD TAIPEI 103, TAIWAN, R.O.C.
MADE IN TAIWAN
ATTENTION
Technician Access Only
Refer to Manual for Service
Authorized Service Only
8
ATTENTION
MAXIMUM of 2 Riders
at any one time.
Weight limit 80 KG
[40 kg per rider]
Caution Moving Car Body
ATTENTION
MAXIMUM of 2 Riders
at any one time.
Weight limit 80 KG
[40 kg per rider]
Caution Moving Car Body

Side View
1. Start Button/SFX 9. Power Plug
[Part # 4230207] [Part # 3601216]
2. Steering Wheel 10. Leveler
[Part # 4230205] [Part # 4230028]
3. Coin Acceptor 11. Wheel LED Light Cover
[Part # 3604056] [Part # 4236014]
4. Coin Box 12. Wheel LED Light
[Part # xxxxxx] [Part # 4233610]
5. Racing Seats 13. Small LED Headlight
[Part # 4230203] [Part # 4233612]
6. Tail LED Light Red 14. Large LED Headlight
[Part # 4233613] [Part # 4233611]
7. Tail LED Light Amber 15. Maintenance Door
[Part # 4233614] [Part # 4235003]
8. Back Fin Light Cover
[Part # 4235008]
Sonic Kiddie Ride Detail Manual
14
13
12
11
10
3
2
15
15
4
7
9
6
8
9

Manual for the software of the machine
10

11

Coin Mech Detail Manual (US Model Only)
Electronic Coin Mech
1. Coin Reject Button
2. Key for Coin Machine #8153
3. Lock
4. Mounting Frame
W 63mm
W 130mm
W 120mm
2
4
3
1
WEIYEI HI-07CS
12

Coin Mech Operating Manual (US Model Only)
Adjust VR sensitivity Tuning
Clockwise: slack selection
Counter-clockwise: strict selection
13

Coin Mech Operating Manual (US Model Only)
STEP 1
Choose the right coin for use in the clamp.
STEP 2
Adjust the right insert size for use from the front panel
back side.
STEP 3
Select the right mode: Normal Open/Normal Close
“Timer Switch” for synchronizing your system.
100ms (Slow Speed/Long Pulse)
50ms (Medium Speed/Medium Pulse)
30ms (Fast Speed/Short Pulse)
STEP 4
Adjust VR Sensitivity Tuning
Clockwise: slack selection (LED dark -> light)
Counter-clockwise: strict selection (LED light -> dark)
14

2
1
3
4
5
Coin Box Manual
Details
1. Key for Coin Box #103
2. Lock
3. Coin Box Frame
4. Coin Box
5. Door of Coin Box
Size: W:175mm x L: 145mm x H: 175mm
16
15

Maintenance Access Manual
1
Details
1. Security Access Screws
Sonic Kiddie Ride Motherboard.
5 6
16
15

SW1 - Dip Switch 1
I = UP O = DOWN
*Default switch position is down.
Free
1 Coin
2 Coins
3 Coins
4 Coins
5 Coins
Sound Test
Machine Test
10 Seconds
1 Minute
2 Minutes
2.5 Minutes
3 Minutes
3.5 Minutes
4 Minutes
5 Minutes
0 Second Delay
1 Second Delay
3 Second Delay
5 Second Delay
56 7 8
1 2 34
O=OFFI=ON
DIP Switch Adjustment
III
I I 0
I0I
I 0 0
0 I I
0I0
0 0 I
000
I I I
I 1 0
I 0 I
0 0 1
I 0 0
0 0 0
0 I I
0 I 0
I I
I 0
0 I
0 0
17

Service Engineers & Maintenance Personnel
No Power
• Make sure the power connector is connected and have correct
voltage. Make sure all power switches are “ON”.
• Check the distribution switch is “ON”.
• Check power going out of the 24V transformer
Cannot Insert Coin
• Go to operator menu check coin setting.
• Reinstall reference coin.
• Make sure DIP switches are set for desired setting.
No Sound
• Go to operator menu change volume setting.
• Adjust amplifier volume.
• Check wire connecting speaker
• Make sure game is credited and ON
START/FX Button Failure
• Change micro switch.
• Check wire connecting.
• Check PCB connection
Ride Not Moving.
• Check motor for damage
• Inspect Orange torque Safety arm
• Inspect Gear Box for leaking oil.
• Check to see if there is debris blocking the base from moving.
Maintenance Guide
1. Please keep the machine clean. The exterior is touched by players,
resulting in it getting dirty, so please use neutral cleaners on surface.
2. Please regularly clean the machine to maintain appearance. Use
stain removers or detergents to clean and remove stains.
3. Check underneath the unit for debris.
4. The appliance must not be cleaned by a water jet.
5. Moving parts inside the appliance, turn off the power before
getting into the appliance.
18
16
15