SEI Javu Storage Bench BC487100TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seifurniturestore.com
Page 1
BC487100TX
Javu Storage Bench
Assembly Instructions

A Quantity
of 1
Back Frame
B Quantity
of 1
Front Frame
CQuantity
of 4
Side Frame
DQuantity
of 2
Metal Tube
EQuantity
of 3
Metal Shelf Frame
F Quantity
of 1
Wood Shelf Panel
G Quantity
of 1
Seat Cushion
H Quantity
of 1
Wicker Basket
J Quantity
of 2
Basket Bottom Panel
Page 2
Javu Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like
carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.

1 Quantity
of 8
Long Bolt ：Ø1/4”×1-1/4” L
2 Quantity
of 12
Short Bolt ：Ø1/4”×1” L
3 Quantity
of 12
Short Bolt ：Ø1/4”×1/2” L
4Quantity
of 6
Wood Screw: 4.0×1/2” L
5Quantity
of 1
Allen Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish.Avoid
rubbing or scratching the surface with rough or abrasive
objects.
For replacement parts or questions, please call SEI
customer service at 1-800-633-5096
Assembly Tool Required:
No.2 Phillips Screwdriver (Not Included
Page 3

Figure 1
.
Attach 4PCS Side Frame (C) to Back
Frame (A):
Insert 8pcs Long Bolt (1) through
holes on Back Frame (A).
Attach Side Frame (C) to Back
Frame (A), tighten usingAllen
Wrench (5).
Figure 2
Attach Metal Tube (D) to Back
Frame (A):
Insert 4pcs Short Bolt (3) through
holes on Metal Tube (D).
Attach Metal Tube (D) to Back
Frame (A), tighten usingAllen
Wrench (5).
Page 4
Javu Storage Bench
Assembly Instructions

Figure 3
Attach 1
st
Metal Shelf Frame (E) to
Back Frame (A):
Insert 2pcs Bolt (2) through holes on
Shelf Frame (E).
Attach Shelf Frame (E) to Back
Frame (A), tighten usingAllen
Wrench (5).
Figure 4
Attach 2
nd
Metal Shelf Frame (E) to
Back Frame (A):
Insert 2pcs Bolt (2) through holes on
Shelf Frame (E).
Attach Shelf Frame (E) to Back
Frame (A), tighten usingAllen
Wrench (5).
Figure 5
Attach 3
rd
Metal Shelf Frame (E) to
Back Frame (A):
Insert 2pcs Bolt (2) through holes on
Shelf Frame (E).
Attach Shelf Frame (E) to Back
Frame (A), tighten using Allen
Wrench (5).
Page 5

Figure 6
Place pre-assembled unit from
Figure 5 onto the Front Frame (B):
Insert 4pcs Short Bolt (3) through
holes on Side Frame (C).
Attach Side Frame (C) to Front
Frame (B), tighten usingAllen
Wrench (5).
Figure 7
Insert 4pcs Short Bolt (3) through
holes on Metal Tubes (D).
Attach Metal Tubes (D) to Front
Frame (B), tighten usingAllen
Wrench (5).
Page 6

Figure 8
Insert 6pcs Bolt (2) through holes on
Shelf Frame (E).
Attach Shelf Frame (E) to Front
Frame (B), tighten usingAllen
Wrench (5).
Figure 9
Slowly push the Wood Shelf Panel
(F) into pre-assembled unit from
Figure 8 by hand.
Page 7

Figure 10
Insert 6pcs Wood Screw (4) through
holes on both Frames (A/B) to attach
Wood Shelf Panel (K), using No.2
Phillips Screwdriver (Not Included).
Figure 11
Slide one side of Basket Bottom
Panel (J) all the way to the bottom of
Wicker Basket (G).
Figure 12
Slowly push the other side of Basket
Bottom Panel (J) into the bottom of
Wicker Basket (G).
Page 8

Figure 13
Place pre-assembled baskets onto
the Metal Shelf Frame (E).
Figure 14
Place Seat Cushion (G) onto the
Wood Shelf Panel (F).
Page 9

Figure 15
Wrap tabs of Seat Cushion (G)
around Back Frame (A).
Figure 16
Now your Javu Storage Bench is
ready to use
Page 10