SEI Hadley FA933800TX User manual

FA933800TX-
Hadley Media Fireplace -
Walnut/Espresso
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com

Hadley Media Fireplace
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to
the pictures. Using the incorrect hardware will cause damage.
A Quantity
of 16
Cam Bolt
B Quantity
of 32
Wood Dowel (￠8 x 30mm)
C Quantity
of 16
Cam Lock
D Quantity
of 8
Short Bolt
E Quantity
of 4
Long Bolt
F Quantity
of 1
2
Lock Washer
G Quantity
of 12
Flat Washer
H Quantity
of 1
Allen Wrench
I Quantity
of 16
Screw (3 x 14mm)
J Quantity
of 4
Shelf Pin
K Quantity
of 2
Hinge
L Quantity
of 12
Screw (3.5 x 1/2”)
M Quantity
of 1
Firebox （in separate carton）
NQuantity
Of 4
Screw (￠8 x 1”)

OQuantity
Of 1
Anti-Tipping Hardware
1 Quantity
of 1
Top Panel
2 Quantity
of 2
Middle Side Panel
3 Quantity
of 1
Middle Shelf Panel
4 Quantity
of 1
Left Side Panel
5 Quantity
of 1
Middle Divided Panel
6 Quantity
of 1
Right Side Panel
7 Quantity
of 1
Bottom Panel
8 Quantity
of 1
Cross Bar

9 Quantity
of 2
Leg
10 Quantity
of 1
Adjustable Foot
11 Quantity
of 1
Back Panel
12 Quantity
of 1
Adjustable Shelf Panel
13 Quantity
of 1
Door Panel
14 Quantity
of 1
Cross Rail
15 Quantity
of 1
Wood Holder
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call Customer Service at 1-800-633-
5096 for assistance,
questions, or parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)

Hadley Media Fireplace
Assembly Instructions
Figure 1
Insert 8pcs wood dowels (B)
into holes on middle side panels (2).
Slip one end of middle side panels
(2) into holes on bottom panel(1).
Then, attach middle shelf panel (3) to
middle side panels (2) as shown.
Use 4pcs long bolts (E) through
lock washers (F) and flat washers
(G) to connect middle shelf panel (3)
and middle side panels (2) to top
panel (1).
Tighten long bolts with Allen wrench
(H).
Figure 2
Insert 2pcs cam locks (C) into holes
on cross rail (14).
Screw 2pcs cam bolts (A) into holes
on middle divided panel (5) and right
side panel (6). Attach middle divided
panel (5) and right side panel (6) to
cross rail (14) by inserting wood
dowels (B) and cam bolts (A) into
corresponding holes until cross rail
(14), middle divided panel (5) and
right side panel (6) meet.
Tighten by rotating cam locks (C)
clockwise with Phillips
screwdriver.
HG
3
2
6
514

Hadley Media Fireplace
Assembly Instructions
Figure 3
Insert 6pcs cam locks (C) into holes
on assembled unit from figure 2 and left
side panel (4).
Screw 6pcs cam bolts (A) into holes on
assembled unit from figure 1.
Attach assembled unit from figure 2 and
left side panel (4) to assembled unit
from figure 1 by inserting wood dowels
(B) and cam bolts (A) into
corresponding holes until assembled
unit from figure 2, left side panel (4),
and assembled unit from figure 1 meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Use 2pcs screws (N) to connect cross
rail (14) to middle shelf panel (3).
Tighten screws (N) with Phillips
screwdriver.
Figure 4
Insert 6pcs cam locks (C) into holes on
assembled unit.
Screw 6pcs cam bolts (A) into holes on
bottom panel (7).
Attach bottom panel (7) to assembled
unit by inserting wood dowels (B) and
cam bolts (A) into corresponding holes
until bottom panel (7) and assembled
unit from figure 3 meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
C
A
B
6
7
C

Figure 5
Insert 2pcs cam locks (C) into holes on
cross bar (8).
Screw 2pcs cam bolts (A) into holes on
legs (9).
Attach legs (9) to cross bar (8) by
inserting 4pcs wood dowels (B) and
2pcs cam bolts (A) into
corresponding holes until cross bar (8)
and legs (9) meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Figure
6
Attach unit from figure 5 to assembled
unit by inserting 4pcs wood dowels (B)
into corresponding holes until units
meet.
Use bolts (D) through lock washers (F)
and flat washers (G) to connect units
together.
Tighten by rotating bolts (D) clockwise
withAllen wrench (H).
Screw adjustable foot (10) into
assembled unit and tighten it by
hand.
B
7
10 8
9
9
8
9
9
C
Hadley Media Fireplace
Assembly Instructions

Hadley Media Fireplace
Assembly Instructions
Figure 7
Use screws (I) to connect back
panel (11) to the back of the unit
as shown.
Tighten by rotating screws (I) clock
wise with Phillips screwdriver.
Figure 8
Use screws (L) to connect hinges (K)
to door panel (13).
Tighten by rotating screws (L)
clockwise with Phillips screwdriver.
11
II
L
L
K
KLL
KLL
13

Hadley Media Fireplace
Assembly Instructions
Figure 9
Use screws (L) to connect door panel
(13) to the right side of the unit as
shown.
Tighten by rotating screws (L)
clockwise with phillips screwdriver.
Insert shelf pins (J) into holes on the
unit keeping all shelf pins parallel to
each other. Then, place adjustable
shelf panel (12) onto shelf pins (J) as
shown.
Figure 10
Place firebox (M) into the
back of the unit as shown.
To achieve uniform clearance
around the door, you may need to adjust
the door by tightening or loosening the
two screw on the hinge
itself
Screws for adjusting the door

HADLEY MEDIA FIREPLACE
Assembly Instructions
Figure 11
Use screws (N) to connect wood
holder (15) to bottom panel.
Tighten screws (N) with Phillips
screwdriver.
Figure 12
Use short screw to connect
brackets to the underside of the
top panel (1) as shown.Tighten
screws with phillips screwdriver.
Drill 1/4 inch pilot holes in near
proximity of the brackets
attached to the top panel, then,
tap the plastic anchors into wall.
Use long screws to connect
brackets to plastic anchors of on wall.
Tighten screws with phillips
Screwdriver.
Move this item close to the
fastened wall brackets and tie in
both brackets with plastic straps
as shown in diagram.
Now your Hadley media
fireplace is ready to use.
Warning: Anti-tipping hardware
must be used for this product to
avoid tipping and injury.