SEI WS893800TX User manual

WS893800TX
SULLIVAN DECORATIVE
MIRROR
Assembly Instructions
PO:13876
For assistance with assembly, contact.
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

WS893800TX
SULLIVAN DECORATIVE MIRROR
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Carefully study the diagrams below.
You may receive extra hardware with your unit.
1 1PC
Mirror
2 1PC
Belt
3 1PC
Knob
A 2PCS
Bolts 1/4”x1/2”
B 2PCS
Caps
C 2PCS
Washers
D 3PCS
Plastic Wall Anchor
E 3PCS
Screws ￠5mm x1-3/16″
F 1PC
Wrench
Assembly Tool Required
No.2 Phillips Screwdriver
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with
rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.

WS893800TX
SULLIVAN DECORATIVE MIRROR
Assembly Instructions
Figure 1
Step 1 :
Attach Belt (2) to Mirror (1) using
Washers (C) and Bolts (A). Then,
cover the Bolts (A) by Caps (B) as
shown.
Figure 2
Step 2 :
1 screw MUST BE directly mounted
into a wall stud. Wall anchor is not
needed when mounting into a wall
stud.
Find a comfortable place and measure
the wall and mark the location of the
center of each mounting holes. See
Figure 2.
Using the level, make sure that all marks
are level on the wall.
Using the power drill and a 3/16″drill bit,
drill three 3/16″holes through the wall at
the mounting hole marks.
Tip: Make sure not to drill into electrical
wiring or plumbing pipes.
Wall
Floor
BA
2
1
C
412mm
313
mm
235
mm

Figure 3
Step 3 :
Insert plastic wall anchors (D) into the
three 3/16″holes. Make sure that the
wall anchors are flush with the wall.
Tip: It may be necessary to use a
hammer to gently tap the anchors into
place.
Using the phillips screwdriver, install
phillips head screw (C) into plastic wall
anchors (D). Turn the screw until there is
a gap of 1/4″between the head of screw
and the wall surface.
Figure 4
Step 4 :
Install Wall Mirror (1) onto the mounting
screws using the mounting holes located
at the back of the unit. Properly secure
unit with mounting holes resting securely
on the mounting screw.
Tip: Use the level to check and make
sure that the wall unit is horizontally and
vertically level.
Wall
#1/4" Gap
1
2
3
Wall
3/16"Hold
#D
Wall anchor
#C

Figure 4
Step 5 :
Install Knob (3) onto the top mounting
screw using the mounting key hole
located at the back of Knob (3). Properly
secure unit with mounting hole resting
securely on the mounting screw.
Hang Belt (2) on Knob (3) as shown.
Important Notice:
Knob (3) is for decorative purpose only.
Please make sure Wall Mirror (1)
securely install on the mounting screws
before hanging Belt (2) on Knob (3).
Your Sullivan Decorative Mirror
assembly is now complete.
3
2

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form